Monitoring and Adaptive Control of Laser Processes
Tóm tắt
Từ khóa
Tài liệu tham khảo
Abels, P., Fujinaga, S., Kaierle, S., Katayama, S., Kratzsch, C., Matsunawa, A., Miyamoto, K., Petereit, P., Poprawe, R., 2003. Correlation of process monitoring with X-ray observation of CO2 laser beam welding. In Lasers and Electro-Optics Europe, 2003. Pp. 567.
Abt, 2011, Camera based closed loop control for partial penetration welding of overlap joints, Physics Procedia1, 2, 730, 10.1016/j.phpro.2011.03.091
Ancona, 2001, Optical sensor for real-time monitoring of CO2 laser welding process, Applied Optics, 40, 6019, 10.1364/AO.40.006019
Baik, 2001, Holographic visualization of laser-induced plume in pulsed laser welding, Optics & Laser Technology, 33, 67, 10.1016/S0030-3992(00)00121-3
Bardin, 2005, Closed-loop power and focus control of laser welding for full-penetration monitoring, Applied optics, 44, 13, 10.1364/AO.44.000013
Bardin, 2005, II. Optical techniques for real-time penetration monitoring for laser welding, Applied optics, 44, 3869, 10.1364/AO.44.003869
Barela, J. & Chrzanowski, K., 2000. Pyrometer for temperature measurement of selective objects of unknown and variable emissivity. Quantitative infrared thermography European Seminar. France. Pp. 130-135.
Barua, 2014, Vision-based defect detection in laser metal deposition process, Rapid Prototyping Journal, 20, 77, 10.1108/RPJ-04-2012-0036
Barua, 2011, Development of low-cost imaging system for laser metal deposition processes, Rapid Prototyping Journal, 17, 203, 10.1108/13552541111124789
Bertrand, 2000, Application of near infrared pyrometry for continuous Nd:YAG laser welding of stainless steel, Applied surface science, 168, 182, 10.1016/S0169-4332(00)00586-9
Berumen, 2010, Quality control of laser-and powder bed-based additive manufacturing (AM) technologies, Physics procedia, 5, 617, 10.1016/j.phpro.2010.08.089
Bi, 2006, Identification and qualification of temperature signal for monitoring and control in laser cladding, Optics and Lasers in Engineering, 44, 1348, 10.1016/j.optlaseng.2006.01.009
Bi, 2013, Study on influential factors for process monitoring and control in laser aided additive manufacturing, Journal of Materials Processing Technology, 213, 463, 10.1016/j.jmatprotec.2012.10.006
Birtalan, D., Nunley, W., 2009. Optoelectronics: Infrared-Visable-Ultraviolet Devices and Applications. CRC Press.
Blug, 2011, Closed-loop control of laser power using the full penetration hole image feature in aluminum welding processes, Physics Procedia, 12, 720, 10.1016/j.phpro.2011.03.090
Boillot, 1985, Adaptive welding by fiber optic thermographic sensing: an analysis of thermal and instrumental considerations, Welding Journal, 64, 209
Bollig, 2005, Einsatz optischer Technologien zur Regelung von Laserstrahlschweißprozessen, Automatisierungstechnik, 53, 513, 10.1524/auto.2005.53.10_2005.513
Bruncko, J., Uherek, F., Chorvat Jr, D., Michalka, M., Fodrek, P., 2002. Spectroscopic investigation of laser-induced plasma in laser beam welding. In Seventh International Conference on Laser and Laser Information Technologies. Pp. 109-115.
Bruncko, 2003, Monitoring of laser welding by optical emission spectroscopy, Laser Physics, 13, 669
Chivel, 2013, Optical in-process temperature monitoring of selective laser melting, Physics Procedia, 41, 904, 10.1016/j.phpro.2013.03.165
Chivel, 2010, On-line temperature monitoring in selective laser sintering/melting, Physics Procedia, 5, 515, 10.1016/j.phpro.2010.08.079
Chivel, 2011, Temperature monitoring and overhang layers problem, Physics Procedia, 12, 691, 10.1016/j.phpro.2011.03.086
Collur, 1989, Emission spectroscopy of plasma during laser welding of AISI 201 stainless steel, Metallurgical and Materials Transactions B, 20, 277, 10.1007/BF02825608
Colombo, 2010, Through optical combiner monitoring of fiber laser processes, International Journal of Material Forming, 3, 1123, 10.1007/s12289-010-0969-8
Craeghs, 2010, Feedback control of layerwise laser melting using optical sensors, Physics Procedia, 5, 505, 10.1016/j.phpro.2010.08.078
Craeghs, 2012, Detection of process failures in Layerwise Laser Melting with optical process monitoring, Physics Procedia, 39, 753, 10.1016/j.phpro.2012.10.097
Craeghs, 2011, Determination of geometrical factors in layerwise laser melting using optical process monitoring, Optics and Lasers in Engineering, 49, 1440, 10.1016/j.optlaseng.2011.06.016
Cremers, 1991, Measurement of energy deposition during pulsed laser welding, Welding journa, l70, 159
Culshaw, B., 2014. Fiber-optic thermometers in “Measurement, Instrumentation and Sensors Handbook. Spatial, Mechanical, Thermal and Radiation Measurement”.2nd edition.In: Webster, J.G., Eren, H. (Ed.) CRC Press.
Dadbakhsh, 2012, Effect of selective laser melting layout on thequality of stainless steel parts, Rapid Prototyping Journal, 18, 241, 10.1108/13552541211218216
Dahmen, M., Kaierle, S., Abels, P., Kratzsch, C., Kreutz, E.W., Poprawe, R., 1999. Adaptive quality control for laser beam welding. In Proceedings of the International Congress on Applications of Lasers and Electro-Optics.November 15-18, 1999, San Diego, CA, USA. Pp. 29-38.
Diego-Vallejo, 2013, Monitoring of focus position during laser processing based on plasma emission, Physics Procedia, 41, 904, 10.1016/j.phpro.2013.03.166
Dixon, R.D., Lewis, G.K., 1985. Electron emission and plasma formation during laser beam welding. In The 65th Annual AWS Convention in Dallas. Pp. 8-13.
Dowden, J.M., Williams, K., Steen, W.M., 1992. Radiative emissions in the laser welding of thin metal sheets. International Congress on Applications of Lasers and Electro-Optics.25-29 October 1992, Orlando, FL, USA.
Doubenskaia, 2006, Pyrometry in laser surface treatment, Surface and Coatings Technology, 201, 1955, 10.1016/j.surfcoat.2006.04.060
Doubenskaia, 2013, Definition of brightness temperature and restoration of true temperature in lasercladding using infrared camera, Surface & Coatings Technology, 220, 244, 10.1016/j.surfcoat.2012.10.044
Duvaut, 2008, Comparison between multiwavelength infrared and visible pyrometry: Application to metals, Infrared Physics & Technology, 51, 292, 10.1016/j.infrared.2007.12.001
Farson, 1998, Relationship of optical and acoustic emissions to laser weld penetration, Welding journal, 77, 142
Fennander, 2009, Visual measurement and tracking in laser hybrid welding, Machine vision and applications, 20, 103, 10.1007/s00138-007-0111-1
Ferrara, 2000, Online quality monitoring of welding processes by means of plasma optical spectroscopy, Proceeding in SPIE, 3888, 750, 10.1117/12.377086
Fox, M.D. T., Peters, C., Blewett, I.J., Hand, D.P., Jones, J.D. C., 1998. Real-time optical monitoring of gas shield condition during Nd:YAG laser weldingIn: International Congress on Applications of Lasers and Electro-Optics. Laser Materials Processing.November 16-19, 1998, Orlando, FL, USA.
Furumoto, 2012, Monitoring of laser consolidation process of metal powder with high speed video camera, Physics Procedia, 39, 760, 10.1016/j.phpro.2012.10.098
Furumoto, 2013, Investigation of laser consolidation process for metal powder by two-color pyrometer and high-speed video camera, CIRP Annals-Manufacturing Technology, 62, 223, 10.1016/j.cirp.2013.03.032
Furumoto, 2009, Study on laser consolidation of metal powder with Yb: fiber laser—Evaluation of line consolidation structure, Journal of Materials Processing Technology, 209, 5973, 10.1016/j.jmatprotec.2009.07.017
Gade, 2014, Thermal cameras and applications: a survey, Machine Vision and Applications, 25, 245, 10.1007/s00138-013-0570-5
Gao, 2012, Seam tracking monitoring based on adaptive Kalman filter embedded Elman neural network during high-power fiber laser welding, IEEE Transactions on Industrial Electronics, 59, 4315, 10.1109/TIE.2012.2193854
Ghasempoor, 2003, Automatic detection of lack of fusion defects in CO2 laser gear welding, Journal of laser applications, 15, 77, 10.2351/1.1536646
Grum, 2004, The influence of different conditions of laser-beam interaction in laser surface hardening of steels, Thin Solid Films, 453-454, 94, 10.1016/j.tsf.2003.11.177
Gu, H., Duley, W.W., 1998. A novel detector for closed-loop focus control during laser beam welding. In International Congress on Applications of Lasers and Electro-Optics: Laser Materials Processing Conference.November 16-19, 1998, Orlando, FL, USA.
Habibi, M., 2014. Image Sensors in “Measurement, Instrumentation, and Sensors Handbook: Electromagnetic, Optical, Radiation, Chemical, and Biomedical Measurement”.2nd edition. In: Webster, J.G., Eren, H. (Ed.).CRC Press.
Hamamatsu. Opto-Semiconductor Handbook. Available at: http://www.hamamatsu.com/resources/pdf/ssd/e02_handbook_si_photodiode.pdf [Accessed 25 April 2014].
Harooni, 2014, Detection of defects in laser welding of AZ31B magnesium alloy in zero-gap lap joint configuration by a real-time spectroscopic analysis, Optics and Lasers in Engineering, 56, 54, 10.1016/j.optlaseng.2013.11.015
Heralić, 2012, Height controloflasermetal-wiredepositionbasedoniterativelearningcontrol and 3 Dscanning, Optics and Lasersin Engineering, 50, 1230, 10.1016/j.optlaseng.2012.03.016
Hirvimäki, 2013, Evaluation of different monitoring methods of laser additive manufacturing of stainless steel, Advanced Materials Research, 651, 812, 10.4028/www.scientific.net/AMR.651.812
Hoffman, 2004, Time-dependent spectroscopy of plasma plume under laser welding conditions, Journal of Physics D: Applied Physics, 37, 1792, 10.1088/0022-3727/37/13/010
Hofman, 2012, A camera based feedback control strategy for the laser cladding process, Journal of Materials Processing Technology, 212, 2455, 10.1016/j.jmatprotec.2012.06.027
Hu, 2003, Sensing, modeling and control for laser-based additive manufacturing, International Journal of Machine Tools and Manufacture, 43, 51, 10.1016/S0890-6955(02)00163-3
Hua, 2008, Research on molten pool temperature in the process of laser rapid forming, Journal of Materials Processing Technology, 198, 454, 10.1016/j.jmatprotec.2007.06.090
Huegel, H., Mueller, M.G., Hohenberger, B., Dausinger, F., 1999. Laser beam welding: recent developments on process conduction and quality assurance. In 10th International School on Quantum Electronics: Lasers--Physics and Applications. Pp. 52-60.
Islam, 2013, Temperature profile and imaging analysis of laser additive manufacturing of stainless steel, Physics Procedia, 41, 828, 10.1016/j.phpro.2013.03.156
Jendrzejewski, 2004, Temperature distribution in laser-clad multi-layers, Materials Science and Engineering A, 379, 313, 10.1016/j.msea.2004.02.053
Jon, 1985, Noncontact acoustic emission monitoring of laser beam welding, Welding journal, 64, 43
Kang, 2001, Quantitative visualization of the laser induced plume behavior using quasi-heterodyne holographic interferometry, Optics & Laser Technology, 33, 581, 10.1016/S0030-3992(01)00071-8
Kenny, T., 2005. Optical and radiation sensors in “Sensor technology handbook” In: Wilson, J. (Ed.). Elsevier Inc.
Khater, 2013, Characteristics and performance of a VUV spectrometer, Nuclear Instruments and Methods in Physics Research A, 714, 1, 10.1016/j.nima.2013.02.041
Khosroshahi, 2010, In situ monitoring the pulse CO2 laser interaction with 316-L stainless steel using acoustical signals and plasma analysis, Applied Surface Science, 256, 7421, 10.1016/j.apsusc.2010.05.083
Kim, 2012, Coaxial monitoring of keyhole welding during Yb:YAG laser welding, Optics & Laser Technology, 44, 1874, 10.1016/j.optlastec.2012.02.025
Kong, 2012, Real-time monitoring of laser welding of galvanized high-strength steel in lap joint configuration, Optics & Laser Technology, 44, 2186, 10.1016/j.optlastec.2012.03.003
Konuk, 2011, Process control of stainless steel laser welding using an optical spectroscopic sensor, Physics Procedia, 12, 744, 10.1016/j.phpro.2011.03.093
Kolossov, 2004, 3D FE simulation for temperature evolutionin the selective laser sintering process, International Journal of Machine Tools & Manufacture, 44, 117, 10.1016/j.ijmachtools.2003.10.019
Krauss, H., Eschey, C., Zaeh, M.F, 2012. Thermography for Monitoring the Selective LaserMelting Process. In: Solid Freeform Fabrication Symposium. Austin, TX, USA.
Köhler, 2013, A novel thermal sensor applied for laser materials processing, Physics Procedia, 41, 502, 10.1016/j.phpro.2013.03.107
Lacroix, 1996, Spectroscopic studies of laser-induced plume during welding with a Nd:YAG laser, Proceedings of SPIE, 2789, 221, 10.1117/12.251181
Lankalapalli, 1999, Laser weld penetration estimation using temperature measurements, Journal of manufacturing science and engineering, 121, 179, 10.1115/1.2831202
Lee, 2014, Analysis of acoustic emission signals during laser spot welding of SS304 stainless steel, Journal of Materials Engineering and Performance, 23, 700, 10.1007/s11665-013-0791-9
Lewis, 1985, Plasma monitoring of laser beam welds, Welding Journal, 64, 49
Li, 2009, Stability information in plasma image of high-power CO2 laser welding, Optics and Lasers in Engineering, 47, 990, 10.1016/j.optlaseng.2009.04.013
Li, 2002, A comparative study of ultrasound emission characteristics in laser processing, Applied Surface Science, 186, 604, 10.1016/S0169-4332(01)00695-X
Lim, 1999, In-process Joint Strength Estimation in Pulsed Laser Spot Welding Using Artificial Neural Networks, Journal of Manufacturing Processes, 1, 31, 10.1016/S1526-6125(99)70003-4
Lober, 2007, Spectroscopic diagnostics of plasma during laser processing of aluminium, Journal of Physics D: Applied Physics, 40, 5917, 10.1088/0022-3727/40/19/021
Locke, 1972, Deep penetration welding with high-power CO2 lasers, IEEE Journal of Quantum Electronics, 8, 132, 10.1109/JQE.1972.1076932
Lott, 2011, Design of an optical system for the in situ process monitoring of selective laser melting (SLM), Physics Procedia, 12, 683, 10.1016/j.phpro.2011.03.085
Meriaudeau, 1997, Laser cladding process and image processing, Lasers in Engineering, 6, 161
Nakamura, J., 2006. Basics of image sensors in “Image Sensors and Signal Processing for Digital Still Cameras”. In: Nakamura, J. (Ed.) CRC Press.
Norman, P., Engström, H., & Kaplan, A.F.H., 2007. State-of-the-art of monitoring and imaging of laser welding defects. In 11th NOLAMP Conference in Laser Processing of Materials, Lappeenranta, Finland.
Norman, P., Karlsson, J., Kaplan, A.F.H., 2009. Monitoring undercut, blowouts and root sagging during laser beam welding. In Proceedings of the Fifth International Conference Lasers In Manufacturing, Munich Germany.
Oezmert, 2013, Detectability of penetration based on weld pool geometry and process emission spectrum in laser welding of copper, Physics Procedia, 41, 502, 10.1016/j.phpro.2013.03.108
Olsson, 2011, Challenges to the interpretation of the electromagnetic feedback from laser welding, Optics and Lasers in Engineering, 49, 188, 10.1016/j.optlaseng.2010.08.018
Palanco, 2001, Spectroscopic diagnostics on CW-laser welding plasmas of aluminum alloys, Spectrochimica Acta Part B: Atomic Spectroscopy, 56, 651, 10.1016/S0584-8547(01)00212-9
Palanco, 2003, Spectral analysis of the acoustic emission of laser-produced plasmas, Applied Optics, 42, 6078, 10.1364/AO.42.006078
Pavlov, 2010, Pyrometric analysis of thermal processes in SLM technology, Physics Procedia., 5, 523, 10.1016/j.phpro.2010.08.080
Pavlov, 2011, Optical diagnostics of deposition of metal matrix composites by laser cladding, Physics Procedia, 12, 674, 10.1016/j.phpro.2011.03.084
Pedersen, P.C., 2014. Ultrasound measurement in “Measurement, Instrumentation and Sensors Handbook. Spatial, Mechanical, Thermal and Radiation Measurement”.2ndedition. In: Webster, J.G., Eren, H. (Ed.) CRC Press.
Pekkarinen, 2012, Laser cladding with scanningoptics: Effect of power adjustment, Journal of Laser Applications, 24, 7, 10.2351/1.4706582
Postma, 2002, Penetration control in laser welding of sheet metal, Journal of Laser Applications, 14, 210, 10.2351/1.1493764
Rasmussen, P., 2014. Acoustic measurementin“Measurement, Instrumentation and Sensors Handbook. Spatial, Mechanical, Thermal and Radiation Measurement”.2ndedition. In: Webster, J.G., Eren, H. (Ed.) CRC Press.
Ricciardi, 1999, On-line process control used in the laser welding of metal sheet lightweight structural panels, CIRP Annals – Manufacturing Technology, 48, 159, 10.1016/S0007-8506(07)63155-2
Rombouts, 2006, Fundamentals of selective laser melting of alloyed steel powders, CIRP Annals-Manufacturing Technology, 55, 187, 10.1016/S0007-8506(07)60395-3
Sabbaghzadeh, 2007, Comparison of pulsed Nd:YAG laser welding qualitative features with plasma plume thermal characteristics, Journal of Physics D: Applied Physics, 40, 1047, 10.1088/0022-3727/40/4/019
Safari, A., Janas, V.F., Bandyopadhyay, A., Kholkine, A., 2014. Piezoelectric sensors and transducers in “Measurement, Instrumentation and Sensors Handbook. Spatial, Mechanical, Thermal and Radiation Measurement”. 2ndedition. In: Webster, J.G., Eren, H. (Ed.) CRC Press.
Salminen, A., 2002. The effects of wire feed parameters on filler wire laser beam interaction. In:International Congress on Applications of Lasers and Electro-Optics. October 14-17, 2002, Scottsdale, AZ, USA.
Sanders, P.G., Leong, K.H., Keske, J.S., Kornecki, G., 1998. Real-time monitoring of laser beam welding using infrared weld emissions. Journal of laser Applications10, 205-211.
Sebestova, H., Chmelickova, H., Nozka, L., Moudry, J., 2012. Non-destructive real time monitoring of the laser welding process. Journal of materials engineering and performance 21, 764-769.
Shao, 2005, Review of techniques for on-line monitoring and inspection of laser welding, Journal of Physics: Conference Series, 15, 101
Sibillano, 2005, Correlation analysis in laser welding plasma, Optics Communications., 251, 28, 10.1016/j.optcom.2005.02.076
Sibillano, T., Ancona, A., Berardi, V.,Lugarà, P.M., 2009. A real-time spectroscopic sensor for monitoring laser welding processes. Sensors 9, 3376-3385.
Sibillano, 2006, Correlation spectroscopy as a tool for detecting losses of ligand elements in laser welding of aluminium alloys, Optics and Lasers in Engineering, 44, 1324, 10.1016/j.optlaseng.2005.12.002
Sibillano, 2007, Optical detection of conduction/keyhole mode transition in laser welding, Journal of Materials Processing Technology, 191, 364, 10.1016/j.jmatprotec.2007.03.075
Sibillano, 2012, Spectroscopic monitoring of penetration depth in CO2, Nd:YAG and fiber laser welding processes, Journal of Materials Processing Technology, 212, 910, 10.1016/j.jmatprotec.2011.11.016
Smurov, 2013, Comprehensive analysis of laser cladding by means of optical diagnostics and numerical simulation, Surface & Coatings Technology, 220, 112, 10.1016/j.surfcoat.2012.10.053
Smurov, I., Martino, V., Ignatiev, M., Flamant, G., 1994. On-line thermocycles measurements in laser applications. Journal de Physique IY C4, 147-150.
Smurov, 2012, Optical Monitoring in Laser Cladding of Ti6Al4V, Journal of thermal spray technology, 21, 1357, 10.1007/s11666-012-9808-4
Stehr, 2010, Closed loop control for laser micro spot welding using fast pyrometer systems, Physics Procedia, 5, 465, 10.1016/j.phpro.2010.08.074
Sun, 2002, Monitoring of laser weld penetration using sensor fusion, Journal of Laser Applications, 14, 114, 10.2351/1.1471562
Szymanski, 1997, The spectroscopy of the plasma plume induced during laser welding of stainless steel and titanium, Journal of Physics D: Applied Physics, 30, 3153, 10.1088/0022-3727/30/22/014
Tan, 2013, Rotary dispersion in optical activity and a rotary Fourier transform spectrometer, Optik, 124, 2798, 10.1016/j.ijleo.2012.08.050
Tang, 2010, Melt pool temperature control for laser metal deposition processes—Part I: online temperature control, Journal of manufacturing science and engineering, 132, 011010, 10.1115/1.4000882
Tönshoff, 1995, Process control systems in laser materials processing, Optical and Quantum Electronics, 27, 1439, 10.1007/BF00326495
Vallejo, D., 2013. Spectroscopic Investigations of Plasma Emission Induced During Laser Material Processing. Epubli GmbH. Berlin.
Vänskä, 2013, Effects of welding parameters onto keyhole geometry for partial penetration laser welding, Physics Procedia, 41, 199, 10.1016/j.phpro.2013.03.070
Wang, 2008, Online study of cracks during laser cladding process based on acoustic emission technique and finite element analysis, Applied Surface Science, 255, 3267, 10.1016/j.apsusc.2008.09.039
Wolfe, W., 2001. Spectrometers in “Handbook of Optical Engineering”. In Malacara, D., Thompson, B.J. (Ed.) Marcel Dekker, Inc. New York.
Yadroitsev, 2014, Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolution, Journal of Alloys and Compounds, 583, 404, 10.1016/j.jallcom.2013.08.183
You, D., Gao, X., Katayama, S., 2013/I. Monitoring of high-power laser welding using high-speed photographing and image processing. Mechanical Systems and Signal Processing. Article.
You, 2013, Multiple-optics sensing of high-brightness disk laser welding process, NDT & E International, 60, 32, 10.1016/j.ndteint.2013.07.005
You, 2014, Visual-based spatter detection during high-power disk laser welding, Optics and Lasers in Engineering, 54, 1, 10.1016/j.optlaseng.2013.09.010
Yu, 2010, Mechanics and energy analysis on molten pool spreading during laser solid forming, Applied Surface Science, 256, 4612, 10.1016/j.apsusc.2010.02.060
Yu, 2013, Cracking behavior and mechanical properties of austenitic stainless steel partsproduced by laser metal deposition, Materials and Design, 45, 228, 10.1016/j.matdes.2012.08.078
Zeng, K., Pal, D., Stucker, B., 2012. A review of thermal analysis methods in laser sintering and selective laser melting. Solid Freeform Fabrication Symposium, Texas Austin.