Molybdenum based nanoporous carbon silica matrix for the oxidation of volatile organic compounds present in the pharmaceutical industry wastewater

Widiana, 2019, Air pollution profiles and health risk assessment of ambient volatile organic compounds above a municipal wastewater treatment plant, Taiwan, aerosol airQual. Res., 19, 375, 10.4209/aaqr.2018.11.0408 Miazek, 2017, Effect of organic solvents on microalgae growth, metabolism and industrial bioproduct extraction: a review, Int. J. Mol. Sci., 18, 10.3390/ijms18071429 Tankiewicz, 2016, Analytical procedures for quality control of pharmaceuticals in terms of residual solvents content: challenges and recent developments, TrAC -Trends Anal. Chem.80, 80, 328, 10.1016/j.trac.2015.09.008 Gracia, 2017, Functionalization and optimization of PLA with coumarin via click chemistry in supercritical CO2, J. CO2 Util., 20, 20, 10.1016/j.jcou.2017.04.008 Ramya, 2019, Performance evaluation of ETP from pesticide manufacturing industry by using WWQI and multivariate statistical analysis, Environ. Sci. Pollut. Res., 26, 20595, 10.1007/s11356-019-05034-z Wei, 2019, Electrophilicity index as a critical indicator for the biodegradation of the pharmaceuticals in aerobic activated sludge processes, Water Res., 160, 10, 10.1016/j.watres.2019.05.057 Vikrant, 2017, Bio-filters for the treatment of VOCs and odors - a review, asianJ Atmos. Environ., 11, 139, 10.5572/ajae.2017.11.3.139 Kamal, 2016 Sultana, 2015, Abatement of VOCs with alternate adsorption and plasma-assisted regeneration: a review, Catalysts., 5, 718, 10.3390/catal5020718 Carabineiro, 2015, Gold supported on metal oxides for volatile organic compounds total oxidation, Catal. Today, 244, 103, 10.1016/j.cattod.2014.06.034 Chen, 2014, Catalytic oxidation of ethyl acetate on cerium-containing mixed oxides, Appl. Catal. A Gen., 472, 101, 10.1016/j.apcata.2013.11.043 Kołodziej, 2012, Coupled engineering and chemical approach to the design of a catalytic structured reactor for combustion of VOCs: cobalt oxide catalyst on knitted wire gauzes, Chem. Eng. J., 200–202, 329, 10.1016/j.cej.2012.06.067 Zhang, 2016, Low-temperature catalysis for VOCs removal in technology and application: a state-of-the-art review, Catal. Today, 264, 270, 10.1016/j.cattod.2015.10.040 Head, 2020, O’Carroll, field test of electrokinetically-delivered thermally activated persulfate for remediation of chlorinated solvents in clay, Water Res., 183, 10.1016/j.watres.2020.116061 Guo, 2020, Selective toluene detection with Mo2CTxMXene at room temperature, ACS Appl. Mater. Interfaces, 12, 57218, 10.1021/acsami.0c16302 Sui, 2017, Au-loaded hierarchical MoO3 hollow spheres with enhanced gas-sensing performance for the detection of BTX (Benzene, toluene, and Xylene) and the sensing mechanism, ACS Appl. Mater. Interfaces, 9, 1661, 10.1021/acsami.6b11754 APHA, 2017 Maharaja, 2017, Protease catalyst produced from salt tolerant Enterococcus feacalis, J. Environ. Chem. Eng., 5, 2042, 10.1016/j.jece.2017.04.014 Swarnalatha, 2009, Electron rich porous carbon/silica matrix from rice husk and its characterization, J. Porous. Mater., 16, 239, 10.1007/s10934-008-9192-0 Karthikeyan, 2014, Synthesis and characterization of co-NPAC and in situ hydroxyl radical generation for the oxidation of dye laden wastewater from the leather industry, RSC Adv., 4, 63354, 10.1039/C4RA10536B Nana, 2021, Mechanical strength and microstructure of metakaolin/volcanic ash-based geopolymer composites reinforced with reactive silica from rice husk ash (RHA), Materialia., 16, 10.1016/j.mtla.2021.101083 Hossain, 2018, Rice husk/rice husk ash as an alternative source of silica in ceramics: a review, J. Asian Ceram. Soc., 6, 299, 10.1080/21870764.2018.1539210 Rodrigue Kaze, 2021, Synergetic effect of rice husk ash and quartz sand on microstructural and physical properties of laterite clay based geopolymer, J. Build. Eng., 43 Wang, 2017, Luminescence mechanism of carbon-incorporated silica nanoparticles Derived from Rice husk biomass, Ind. Eng. Chem. Res., 56, 5906, 10.1021/acs.iecr.7b00700 Chen, 2018, Effect of organic polymers on the properties of slag-based geopolymers, Constr. Build. Mater., 167, 216, 10.1016/j.conbuildmat.2018.02.031 Matsumae, 2020, Hydrophilic direct bonding of diamond (111) substrate using treatment with H 2 SO 4 /H 2 O 2, Jpn. J. Appl. Phys., 59, 10.7567/1347-4065/ab4c87 Karthikeyan, 2015, Synthesis of reactive iron impregnated nanoporous activated carbon and its application in anaerobic biological treatment to enhance biodegradability of ortho-phenylenediamine, J. Chem. Technol. Biotechnol., 90, 1013, 10.1002/jctb.4403 Bhaisare, 2016, Synthesis and characterization of two-dimensional carbon dots decorated with molybdenum oxide nanoflakes with various phases, New J. Chem., 40, 8954, 10.1039/C6NJ02175A Shen, 2018, A general and simple method of preparing molybdenum- incorporated silica nanoparticles as potential catalysts for epoxidation of alkenes, ChemistrySelect., 3, 9084, 10.1002/slct.201801955 Gu, 2019, Enhanced electrochemical hydrogen evolution over defect-induced hybrid MoO 3 /Mo 3 O 9 ·H 2 O microrods, Appl. Surf. Sci., 469, 348, 10.1016/j.apsusc.2018.11.050 Ravichandran, 2016, Extractive spectrophotometric method for the determination of molybdenum (VI) in environmental samples, Int. J. Res. Pharm. Sci., 7, 164 Nasiru, 2021, Properties of cement mortar containing recycled glass and rice husk ash, Constr. Build. Mater., 299, 10.1016/j.conbuildmat.2021.123900 Karthikeyan, 2013, Nanoporous activated carbon fluidized bed catalytic oxidations of aqueous o, p and m-cresols: kinetic and thermodynamic studies, Environ. Sci. Pollut. Res., 20, 4790, 10.1007/s11356-012-1380-4 Chindaprasirt, 2020, Eco-production of silica from sugarcane bagasse ash for use as a photochromic pigment filler, Sci. Rep., 10, 1, 10.1038/s41598-020-66885-y Newton, 2018, Aluminium-rich silica scaling : San Jacinto-tizate geothermal energy project, Nicaragua Prinsloo, 2018, The thermal behaviour of silica varieties used for tool making in the stone age, J. Therm. Anal. Calorim., 131, 1135, 10.1007/s10973-017-6602-z Dong, 2015, Molybdenum-doped mesoporous carbon/graphene composites as efficient electrocatalysts for the oxygen reduction reaction, J. Mater. Chem. A, 3, 19969, 10.1039/C5TA04624F Baghdasaryan, 2015, DTA/TGA study of molybdenum oxide reduction by Mg/Zn & Mg/C combined reducers at non-isothermal conditions, Int. J. Refract. Met. Hard Mater., 51, 315, 10.1016/j.ijrmhm.2015.04.037 Choi, 2017, Continuous synthesis of molybdenum oxide microspheres by ultrasonic spray pyrolysis, J. Ind. Eng. Chem., 47, 254, 10.1016/j.jiec.2016.11.041 Choi, 2015, Production of molybdenum oxide particles with high yield by ultrasonic spray pyrolysis and their catalytic activity toward partial oxidation of n-dodecane, J. Anal. Appl. Pyrolysis, 112, 276, 10.1016/j.jaap.2015.01.014 Lee, 2008, In situ raman spectroscopy of SiO2-supported transition metal oxide catalysts: an isotopic 18O–16O exchange study, J. Phys. Chem. C, 112, 6487, 10.1021/jp076485w Guesmi, 2014, Characterization of molybdenum monomeric oxide species supported on hydroxylated silica: a DFT study, Phys. Chem. Chem. Phys., 16, 18253, 10.1039/C4CP02296C Lee, 2007, In situ spectroscopic investigation of the molecular and electronic structures of SiO 2 supported surface metal oxides, J. Phys. Chem. C, 111, 14410, 10.1021/jp0735482 Kopachevska, 2015, Determination of molybdenum oxidation state on the mechanochemically treated MoO3, Him. Fiz. Ta Tehnol. Poverhni., 6, 474, 10.15407/hftp06.04.474 Kolbanev, 2021, Room-temperature mechanochemical synthesis of RE molybdates: impact of structural similarity and basicity of oxides, J. Am. Ceram. Soc., 104, 5698, 10.1111/jace.17939 Zhang, 2021, Controllable synthesis of the defect-enriched MoO3−xnanosheets as an effective visible-light photocatalyst for the degradation of organic dyes, environ. SciNano, 8, 2049 Mošner, 2018, Sodium phosphate glasses modified by MoO3 and WO3, Phys. Chem. Glas. Eur. J. Glas. Sci. Technol. Part B., 59, 213, 10.13036/17533562.59.5.020 Das, 2016, Synthesis and structure–property relations in xMoO3–0.6B2O3–(0.4−x)K2O (0.010 ≤ x ≤ 0.295) glasses, J. Non-Cryst. Solids, 432, 480, 10.1016/j.jnoncrysol.2015.10.045 Barbon, 2012, An EPR study on nanographites, Appl. Magn. Reson., 42, 197, 10.1007/s00723-011-0285-6 Merupo, 2015, Structural, electronic and optical features of molybdenum-doped bismuth vanadium oxide, Mater. Sci. Semicond. Process., 31, 618, 10.1016/j.mssp.2014.12.057 Marakatti, 2015, Molybdenum oxide/γ-alumina: an efficient solid acid catalyst for the synthesis of nopol by prins reaction, RSC Adv., 5, 93452, 10.1039/C5RA12106J Pradhan, 2012, Synthesis of multifunctional nanostructured zinc-iron mixed oxide photocatalyst by a simple solution-combustion technique, ACS Appl. Mater. Interfaces, 4, 707, 10.1021/am201326b Karthikeyan, 2017, Preparation and characterization of mesoporous activated carbon and its application in heterocatalytic Fenton, World Acad. Sci. Eng. Technol., 68, 1971 Tammam, 2017, On the electrocatalytic urea oxidation on nickel oxide nanoparticles modified glassy carbon electrode, J. Electroanal. Chem., 794, 189, 10.1016/j.jelechem.2017.04.023 Boehm, 2012, Free radicals and graphite, Carbon N. Y., 50, 3154, 10.1016/j.carbon.2011.10.013 Zhan, 2014, Rapid degradation of toxic toluene using novel mesoporous SiO2 doped TiO2 nanofibers, Catal. Today, 225, 10, 10.1016/j.cattod.2013.08.018 Chen, 2018, Catalytic combustion of toluene over mesoporous Cr2O3-supported platinum catalysts prepared by in situ pyrolysis of MOFs, Chem. Eng. J., 334, 768, 10.1016/j.cej.2017.10.091 Liu, 2011, Structural controls on the catalytic polymerization of hydroquinone by birnessites, Clay Clay Miner., 59, 525, 10.1346/CCMN.2011.0590510 Huang, 2020, Fabrication of MnOx-CeO2/cordierite catalysts doped with FeOx and CuO for preferable catalytic oxidation of chlorobenzene, Environ. Technol. (U. K.), 41, 1664, 10.1080/09593330.2018.1543359