Molybdenum alloying in high-performance flat-rolled steel grades

Mohrbacher H (2013) Reverse metallurgical engineering towards sustainable manufacturing of vehicles using Nb and Mo alloyed high performance steels. Adv Manuf 1:28–41 Mohrbacher H, Spöttl M, Paegle J (2015) Innovative manufacturing technology enabling light weighting with steel in commercial vehicles. Adv Manuf 3:3–18 Isasti N, Jorge-Badiola D, Taheri ML et al (2014) Microstructural features controlling mechanical properties in Nb-Mo microalloyed steels. Part I: yield strength. Metall Mat Trans A 45:4960–4971 Isasti N, Jorge-Badiola D, Taheri ML et al (2014) Microstructural features controlling mechanical properties in Nb-Mo microalloyed steels. Part II: impact toughness. Metall Mat Trans A 45:4972–4982 Isasti N, Jorge-Badiola D, Taheri ML et al (2013) Phase transformation study in Nb-Mo microalloyed steels using dilatometry and EBSD quantification. Metall Mat Trans A 44:3552–3563 Pavlina EJ, Speer JG, van Tyne CJ (2012) Equilibrium solubility products of molybdenum carbide and tungsten carbide in iron. Script Mater 66(5):243–246 Hoerner M, Speer J, Eberhart M (2017) Comparison of Ab-initio solute-boundary binding energies and experimental recrystallization data in austenite for solute Nb and other elements. ISIJ Int 57(10):1847–1850 Hepburn DJ, MacLeod E, Ackland GJ (2014) Transition metal solute interactions with point defects in austenitic iron from first principles. Phys Rev B 92:014110 Li YJ, Ponge D, Choi P et al (2015) Segregation of boron at prior austenite grain boundaries in a quenched martensitic steel studied by atom probe tomography. Script Mater 96:13–16 Eckstein HJ, Fennert M, Ohser J (1993) Application of thermodynamic computations to the solution behaviour of niobium and vanadium carbonitrides. Steel Res 64(3):143–147 Lee SJ, Matlock D, van Tyne C (2011) An empirical model for carbon diffusion in austenite incorporating alloying element effects. ISIJ Int 51(11):1903–1911 Medina SF, Mancilla JE (1996) Influence of alloying elements in solution on static recrystallization kinetics of hot deformed steels. ISIJ Int 36(8):1063–1069 Akben MG, Bacroix B, Jonas JJ (1983) Effect of vanadium and molybdenum addition on high temperature recovery, recrystallization and precipitation behavior of niobium-based microalloyed steels. Acta Metall 31(1):161–174 Togashi F, Nishizawa T (1976) Effect of alloying elements on the mobility of ferrite/austenite interface. J Jpn Inst Metals 40(1):12–21 Tither G, Lavite M (1976) Beneficial stress-strain behavior of moly-columbium steel line pipe. JOM 27:15–23 Funakawa Y, Shiozaki T, Tomita K et al (2004) Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides. ISIJ Int 44(11):1945–1951 Engberg G, Lissel L (2008) A physically based microstructure model for predicting the microstructural evolution of a C-Mn steel during and after hot deformation. Steel Res Int 79:47–58 Yen HW, Chen PY, Huang CY et al (2011) Interphase precipitation of nanometer-sized carbides in a titanium-molybdenum-bearing low-carbon steel. Acta Mater 59:6264–6274 Larzabal G, Isasti N, Rodriguez-Ibabe JM (2018) Precipitation strengthening by induction treatment in high strength low carbon microalloyed hot-rolled plates. Metall Mat Trans A 49:946–961 Huang BM, Yang JR, Yen HW et al (2014) Secondary hardened bainite. Mater Sci Technol 30(9):1014–1023 Belanger P, Hall J, Coryell J et al (2013) Automotive body press-hardened steel trends. In: Proceedings of the international symposium on the new developments of advanced high-strength steel, 23–27 June 2013, Vail, Colorado, USA, pp 239–250 Bian J, Mohrbacher H (2013) Novel alloying design for press hardening steels with better crash performance. In: Proceedings of the international symposium on the new developments of advanced high-strength steel, 23–27 June 2013, Vail, Colorado, USA, pp 251–262 Olsson R, Haglund N (1991) Cost effective fabrication of submarines and mobile cranes in high performance steels. Int J Join Mater 3:120–128 Shang C, Guo F (2018) The state of the art of long-distance gas pipeline in China. Gas Energy 1:24–29 Piette M, Dubrulle-Prat E, Perdrix C et al (2001) Effect of 0–0.1%Nb additions on mechanical properties of plates processed by thermomechanically controlled processing and accelerated cooling. Iron Mak Steelmak 28(2):175–179 Subramanian SV, Yang Y (2014) On austenite conditioning and recrystallization control of higher grade linepipe steels (X100) with niobium and molybdenum additions. In: Mohrbacher H (ed) Fundamentals and applications of Mo and Nb alloying in high performance steels, vol 1, TMS, pp 3–22 Bian J, Mohrbacher H, Zhang JS et al (2015) Application potential of high performance steels for weight reduction and efficiency increase in commercial vehicles. Adv Manuf 3:27–36 Kage I, Matsui K, Kawabata F (2005) Minimum maintenance steel plates and their application technologies for bridge—life cycle cost reduction technologies with environmental safeguards for preserving social infrastructure assets. JFE Tech Rep 5:37–44 Walp MS, Speer JG, Matlock DK (2004) Fire-resistant steels. Adv Mater Process 162:34–36 Mizutani Y, Ishibashi K, Yoshi K et al (2004) 590 MPa class fire-resistant steel for building structural use. Nippon Steel Tech Rep 90:45–52 Sugimoto K (2009) Fracture strength and toughness of ultra-high strength TRIP aided steels. Mater Sci Technol 25:1108–1117 Nagumo M (2001) Function of hydrogen in embrittlement of high-strength steels. ISIJ Int 41:590–598 Degenkolbe J, Mahn J, Muesgen B et al (1987) Experience gained in the accelerated cooling of plate directly after rolling. Thyssen Tech Rep 87(1):41–55 Takaki S, Ngo-Huynh KL, Nakada N et al (2012) Strengthening mechanism in ultra low carbon martensitic steel. ISIJ Int 52:710–716 Grossman MA (1942) Hardenability calculated from chemical composition. Trans Am Inst Min Metall Petrol Eng 150:227–259 Maki T, Tsuzaki K, Tamura I (1980) The morphology of the strengthening of lath martensite in steels. Trans Iron Steel Inst Jpn 20:207–215 Hannula J, Kömi J, Porter D et al (2017) Effect of boron on the strength and toughness of direct-quenched low-carbon niobium bearing ultra-high-strength martensitic steel. Metall Mat Trans A 48:5344–5356 Mohrbacher H (2018) Property optimization in as-quenched martensitic steel by molybdenum and niobium alloying. Metals 8:234. https://doi.org/10.3390/met8040234 Ohnuma M, Suzuki J, Wei FG et al (2008) Direct observation of hydrogen trapped by NbC in steel using small-angle neutron scattering. Script Mater 58:142–145 Mohrbacher H (2019) Metallurgical effects of niobium and molybdenum on heat-affected zone toughness in low-carbon steel. Appl Sci 9(9):1847. https://doi.org/10.3390/app9091847 Ahlblom B, Hansson P, Narström T (2007) Martensitic structural steels for increased strength and wear resistance. Mater Sci Forum 539(543):4515–4520 Ishikawa N, Ueda K, Mitao S et al (2011) High-performance abrasion-resistant steel plates with excellent low-temperature toughness. In: Proceedings of international symposium on the recent developments in plate steels. AIST, Winter Park, pp 81–91 Schmit F, Cobo S (2016) New press hardened steels and tailored blank applications. In: Materials in Car Body Engineering 2016, Bad Nauheim, Germany, 9–11 May 2016 Avtar R, Jha BK, Saxena A et al (1986) An as hot rolled approach to production of molybdenum and chromium microalloyed dual phase steels. Trans ISIJ 26:822–828 Coldren AP, Ellis GT (1980) Using CCT Diagrams to optimize the composition of an as-rolled dual-phase steel. J Metals 32(3):41–48 Geib MD, Matlock DK, Krauss G (1980) The effect of intercritical annealing temperature on the structure of niobium microalloyed dual- phase steel. Metall Trans A 11:1683–1689 Irie T, Satoh S, Hashiguchi K et al (1981) Metallurgical factors affecting the formability of cold-rolled high strength steel sheets. Trans ISIJ 21(11):793–801 Sugimoto K (2009) Fracture strength and toughness of ultra-high strength TRIP aided steels. Mater Sci Technol 25(9):1109–1117 Hashimoto S, Ikeda S, Sugimoto K et al (2004) Effects of Nb and Mo addition to 0.2%C-1.5%Si-1.5%Mn steel on mechanical properties of hot rolled TRIP-aided steel sheets. ISIJ Int 44(9):1590–1598 Sugimoto K, Murata M, Muramatsu M et al (2007) Formability of C-Si-Mn-Al-Nb-Mo ultra high-strength TRIP-aided sheet steels. ISIJ Int 47(9):1357–1362 Kobayashi J, Ina D, Yoshikawa N et al (2012) Effects of the addition of Cr, Mo and Ni on the microstructure and retained austenite characteristics of 0.2%C-Si-Mn-Nb ultrahigh-strength TRIP-aided bainitic ferrite steels. ISIJ Int 52(10):1894–1901 Speer JG, Matlock DK, de Cooman BC et al (2003) Carbon partitioning into austenite after martensite transformation. Acta Mater 51:2611–2622 Yan S, Liu X, Liang T et al (2019) Effect of micro-alloying elements on microstructure and mechanical properties in C-Mn-Si quenching and partitioning (Q&P) steels. Steel Res Int 90:1800257. https://doi.org/10.1002/srin.201800257 Sun XJ, Li ZD, Yong QL et al (2012) Third generation high strength low alloy steels with improved toughness. Sci China Technol Sci 55(7):1797–1805 Yuan S, Shang C, Xie Z et al (2018) Impact of intercritical annealing on retained austenite and toughness of a 460 MPa grade multiphase heavy gauge plate steel. Steel Res Int 89:1800006. https://doi.org/10.1002/srin.201800006 Stewart RA, Speer JG, Thomas BG et al (2018) Process design for quenching and partitioning of plate steels. In: Proceedings of the 2nd international symposium on the recent developments in plate steels, Orlando, AIST, pp 469–475 Hernaut P, Ertzibengoa D, de Cooman BC et al (2018) Development of high-performance steel plates at NLMK clabecq. In: Proceedings of the 2nd international symposium on the recent developments in plate steels, Orlando, AIST, pp 139–149 Xie ZJ, Xiong L, Han G et al (2018) Thermal stability of retained austenite and properties of a multi-phase low alloy steel. Metals 8(10):807. https://doi.org/10.3390/met8100807