Modified maximum force criterion, a model for the theoretical prediction of forming limit curves
Tóm tắt
Từ khóa
Tài liệu tham khảo
Keeler SP (1965) Determination of forming limit in automotive stamping. Soc Automot Engineering Nr. 650 535:1–9
Hill R (1952) On discontinuous plastic states, with special references to localized necking in the sheets. J Mech Phys Solid 1:19–30
Hutchinson JW, Neale KW (1977) Influence of strain-rate sensitivity on necking under uniaxial tension. Acta Metall 25:839–846
Hill R, Hutchinson JW (1975) Bifurcation phenomena in the plane tension test. J Mech Phys Solid 23:239–264
Hora P et al (1996) A prediction method for ductile sheet metal failure using FE-simulation. NUMISHEET, Dearborn, pp 252–256
Hora P, et al (2003) Mathematical prediction of FLC using macroscopic instability criteria combined with micro structural crack propagation models, Plasticity, Quebec, Canada, pp. 364–366
Hora P, Tong L (2006) Numerical prediction of FLC using the enhanced modified maximum force criterion (eMMFC), FLC-Zurich 06, pp. 31–36
Krauer J, Hora P, Tong L (2007) Forming limits prediction of metastable materials with temperature and strain induced martensite transformation. In: Proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2007), Porto, Portugal, pp. 1263–1268
Hora P, Tong L (2008) Theoretical prediction of the influence of curvature and thickness on the enhanced modified maximum force criterion, In: Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2008), Interlaken, Switzerland, pp. 205–210
Hora P, Eberle B, Volk W (2009) Numerical methods for a robust user-independent evaluation of Nakajima test for the FLC determination. In: Proceedings of the International Deep Drawing Research Group 2009 (IDDRG 2009), Golden CO, USA, pp.437–44
Banabic D, et al (2007) Anisotropy and formability, advances in material forming. Springer Verlag, pp. 143–173
Barlat F et al (2003) Plane stress yield function for aluminum alloy sheets–Part 1: theory. Int J Plast 19:1297–1319
Ghosh AK (1980) A physically-based constitutive model for metal deformation. Acta Metall 28:1443–1465
Hockett JE, Sherby OD (1975) Large strain deformation of poly crystalline metals at low homologous temperatures. J Mech Phys Solids 23:87–98
Hill R (1979) Theoretical plasticity of textured aggregates. Math Proc Cambridge Philosophical Soc 85:179–191
Aretz H (2004) Numerical restrictions of the modified maximum force criterion for prediction of forming limits in sheet metal forming. Model Simulat Mater Sci Eng 12:677–692
Barlat F, Lian J (1989) Plastic behaviour and stretchability of sheet metal (Part 1): a yield function for orthotropic sheet under plane stress conditions. Int J Plast 5:51–56
Comsa DS, et al (2011) Prediction of the forming limit band for steel sheets using a new formulation of Hora’s criterion (MMFC), AIP Conference Proceedings, vol. 1315 (AMPT 2010), pp 425–430
Banabic D, Soare S (2009) Assessment of the modified maximum force criterion for Aluminum metallic sheets. Key Engineer Mate 410:511–520
Numisheet Benchmark 1 (2008) Virtual prediction of ductile material failure, Numisheet, Interlaken, Switzerland