Modification of the Grid-Characteristic Method on Chimera Meshes for 3D Problems of Railway Non-destructive Testing

N. Rossini, M. Dassisti, K. Benyounis, and A. Olabi, ‘‘Methods of measuring residual stresses in components,’’ Mater. Des. 35, 572–588 (2012). Y. Hwang, Y. Kim, D. Seo, M. Seo, W. Lee, S. Kwon, and K. Kim, ‘‘Experimental consideration of conditions for measuring residual stresses of rails using magnetic barkhausen noise method,’’ Materials 14, 5374 (2021). H. Palkowski, S. Brück, T. Pirling, and A. Carradò, ‘‘Investigation on the residual stress state of drawn tubes by numerical simulation and neutron diffraction analysis,’’ Materials 6, 5118–5130 (2013). J. Kelleher, M. Prime, D. Buttle, P. Mummery, P. Webster, J. Shackleton, and P. Withers, ‘‘The measurement of residual stress in railway rails by diffraction and other methods,’’ J. Neutron Res. 11, 187–193 (2003). H. Huang, K. Zhang, M. Wu, H. Li, M. Wang, S. Zhang, J. Chen, and M. Wen, ‘‘Comparison between axial residual stresses measured by Raman spectroscopy and X-ray diffraction in SiC fiber reinforced titanium matrix composite,’’ Acta Phys. Sin. 67 (19), 267–276 (2018). Z. Li, J. He, J. Teng, and Y. Wang, ‘‘Internal stress monitoring of in-service structural steel members with ultrasonic method,’’ Materials 9, 223 (2016). G. Jiang, F. Haiyang, P. Bo, and K. Renke,‘‘Recent progress of residual stress measurement methods: A review,’’ Chin. J. Aeronaut. 34 (2), 54–78 (2021). D. Jia, G. Bourse, S. Chaki, M. Robin, and H. Demouveau, ‘‘Investigation of stress and temperature effect on the longitudinal ultrasonic waves in polymers,’’ Res. Nondestr. Eval. 25, 20–29 (2014). Y. Javadi, K. Azarib, S. Ghalehbandi, and M. Roy, ‘‘Comparison between using longitudinal and shear waves in ultrasonic stress measurement to investigate the effect of post-weld heat-treatment on welding residual stresses,’’ Res. Nondestr. Eval. 28, 101–122 (2017). Y. Hwang, G. Kim, Y. Kim, J. Park, M. Choi, and K. Kim, ‘‘Experimental measurement of residual stress distribution in rail specimens using ultrasonic LCR waves,’’ Appl. Sci. 11, 9306 (2021). S. Alahakoon, Y. Sun, M. Spiryagin, and C. Cole, ‘‘Rail flaw detection technologies for safer, reliable transportation: A review,’’ J. Dyn. Syst. Meas. Control 140, 020801 (2017). X. Gao, Y. Liu, J. Li, and M. Yuan, ‘‘Automatic recognition and positioning of wheel defects in ultrasonic B-scan image using artificial neural network and image processing,’’ J. Test. Eval. 48, 20180545 (2019). H. Yu, Q. Li, Y. Tan, and J. Gan ‘‘A coarse-to-fine model for rail surface defect detection,’’ IEEE Trans. Instrum. Meas. 99, 1–11 (2018). Z. Xiong, Q. Li, Q. Mao, and Q. Zou ‘‘A 3D laser profiling system for rail surface defect detection,’’ Sensors 17, 1791 (2017). X. Huang, Y. Shi, Y. Zhang, P. Li, L. Xiong, and Y. Zhong, ‘‘BP neural network based on rail flaw classification of RFD car’s B-scan data,’’ China Railway 03, 82–87 (2018). F. Wu, Q. Li, S. Li, and T. Wu, ‘‘Train rail defect classification detection and its parameters learning method,’’ Measurement 151, 107246 (2020). Z. Tang, F. Liu, S. Guo, J. Chang, and J. Zhang, ‘‘Evaluation of coupled finite element/meshfree method for a robust full-scale crashworthiness simulation of railway vehicles,’’ Adv. Mech. Eng. 8, 1687814016642954 (2016). D. Adak, A. Pramod, E. Ooi, and S. Natarajan, ‘‘A combined virtual element method and the scaled boundary finite element method for linear elastic fracture mechanics,’’ Eng. Anal. Boundary Elem. 113, 9–16 (2020). Z. Teng, F. Sun, S. Wu, Z. Zhang, T. Chen, and D. Liao, ‘‘An adaptively refined XFEM with virtual node polygonal elements for dynamic crack problems,’’ Comput. Mech. 62, 1087–1106 (2018). S. Wu, S. Zhang, and Z. Xu, ‘‘Thermal crack growth-based fatigue life prediction due to braking for a high-speed railway brake disc,’’ Int. J. Fatigue 87, 359–369 (2016). S. Jiang, Y. Gu, C. Fan, and W. Qu, ‘‘Fracture mechanics analysis of bimaterial interface cracks using the generalized finite difference method,’’ Theor. Appl. Fract. Mech. 113, 102942 (2021). R. Nejad, Z. Liu, W. Ma, and F. Berto, ‘‘Reliability analysis of fatigue crack growth for rail steel under variable amplitude service loading conditions and wear,’’ Int. J. Fatigue 152, 106450 (2021). V. Golubev, A. Shevchenko, N. Khokhlov, I. Petrov, and M. Malovichko, ‘‘Compact grid-characteristic scheme for the acoustic system with the piece-wise constant coefficients,’’ Int. J. Appl. Mech. 14, 2250002 (2022). V. Leviant, N. Marmalevsky, I. Kvasov, P. Stognii, and I. Petrov, ‘‘Numerical modeling of seismic responses from fractured reservoirs in 4D monitoring. Part 1: Seismic responses from fractured reservoirs in carbonate and shale formations,’’ Geophysics 86, 211–232 (2021). A. Kozhemyachenko, I. Petrov, A. Favorskaya, and N. Khokhlov, ‘‘Boundary conditions for modeling the impact of wheels on railway track,’’ Comput. Math. Math. Phys. 60, 1539–1554 (2020). A. Favorskaya, N. Khokhlov, and I. Petrov, ‘‘Grid-characteristic method on joint structured regular and curved grids for modeling coupled elastic and acoustic wave phenomena in objects of complex shape,’’ Lobachevskii J. Math. 41, 512–525 (2020). N. Khokhlov, A. Favorskaya, V. Stetsyuk, and I. Mitskovets, ‘‘Grid-characteristic method using Chimera meshes for simulation of elastic waves scattering on geological fractured zones,’’ J. Comput. Phys. 446, 110637 (2021). A. Favorskaya and N. Khokhlov, ‘‘Using chimera grids to describe boundaries of complex shape,’’ Smart Innov. Syst. Technol. 309, 249–258 (2022).