Modification of glass fibers to improve reinforcement: A plasma polymerization technique

Anusavice, 2003 Mc Cabe, 1998 Darbar, 1994, Denture fracture—a survey, Br Dent J, 176, 342, 10.1038/sj.bdj.4808449 Vallittu, 1994, Transverse strength and fatigue of denture acrylic-glass fiber composite, Dent Mater, 10, 116, 10.1016/0109-5641(94)90051-5 John, 2001, Flexural strength of heat-polymerized polymethyl methacrylate denture resin reinforced with glass, aramid, or nylon fibers, J Prosthet Dent, 86, 424, 10.1067/mpr.2001.118564 Kanie, 2000, Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers, Dent Mater, 16, 150, 10.1016/S0109-5641(99)00097-4 Narva, 2005, The static strength and modulus of fiber reinforced denture base polymer, Dent Mater, 21, 421, 10.1016/j.dental.2004.07.007 Alander, 2005, The span length and cross-sectional design affect values of strength, Dent Mater, 21, 347, 10.1016/j.dental.2004.05.009 Keyf, 2003, The effects of HEMA-monomer and air atmosphere treatment of glass fiber on the transverse strength of a provisional fixed partial denture resin, J Oral Rehabil, 30, 1142, 10.1046/j.1365-2842.2003.01059.x Vallittu, 1996, Comparison of the in vitro fatigue resistance of acrylic resin removable partial denture reinforced with continuous glass fiber or metal wires, J Prosthodont, 5, 115, 10.1111/j.1532-849X.1996.tb00285.x Karacaer, 2001, Reinforcement of maxillary dentures with silane-treated ultra high modulus polyethylene fibers, J Oral Sci, 43, 103, 10.2334/josnusd.43.103 Narva, 2001, Clinical survey of acrylic resin removable denture repairs with glass fiber reinforcement, Int J Prosthodont, 14, 219 Folkes, 1992, Short fiber reinforced plastics Krenchel, 1964 Plueddemann, 1991 Yasuda, 1985 Gerenser L, Grace J, Apai G, Thompson P. Surface chemistry of a nitrogen-plasma-treated polyester, Polymer Pre-prints Papers Presented at San Francisco, California Meeting, Division of Polymer Chemistry Inc., American Chemical Society (ACS) Symposium Series, vol. 38; 1997, p. 1069–70. Rongzhi, 1997, Application of plasma technologies in fiber-reinforced polymer composites: a review of recent developments, Compos Part A: Appl Sci Manuf, 28, 73, 10.1016/S1359-835X(96)00097-8 Weikart, 1999, Surface modification of conventional polymers by depositing plasma polymers of trimethylsilane and of trimethylsilane+02. I: Static wetting properties, J Colloid Interface Sci, 211, 18, 10.1006/jcis.1998.5963 John, 2000, Argon plasma treatment of polystyrene microtiter wells. Chemical and physical characterisation by contact angle, ToF-SIMS, XPS and STM, Colloids Surf, 174, 287, 10.1016/S0927-7757(00)00497-0 Hyun, 2001, A new approach to characterize crystallinity by observing the mobility of plasma treated polymer surfaces, Polymer, 42, 6473, 10.1016/S0032-3861(01)00116-1 Marais, 2001, Effect of a plasma treatment on water diffusivity and permeability of an unsaturated polyester resin, J Fluorine Chem, 107, 199, 10.1016/S0022-1139(00)00359-6 Luner, 2001, Characterization of the surface free energy of cellulose ether films, Colloid Surf, 181, 31, 10.1016/S0927-7757(00)00805-0 Clint, 2001, Adhesion and components of solid surface energies, Curr Opin Colloid Interface Sci, 6, 28, 10.1016/S1359-0294(00)00084-4 Prikryl, 2003, Surf Coat Technol, 173 Shirley, 1972, High-resolution X-ray photoemission spectrum of the valence bands of gold, Phys Rev B, 5, 4709, 10.1103/PhysRevB.5.4709 Band, 1979, Photoemission cross sections and distributions, At Data Nucl Data Tables, 23, 443, 10.1016/0092-640X(79)90027-5 Tanuma, 1994, Surface calculations of electron inelastic mean free paths. 5: Data for 14 organic-compounds over the 50–2000eV range, Interface Anal, 21, 165, 10.1002/sia.740210302 Jiricek, 1994, Measurement of the transmission function of the hemispherical energy analyzer of ADES 400 electron spectrometer, Czech J Phys, 44, 261, 10.1007/BF01694490 Zemek, 2000, Carbon nitride layers created by laser deposition combined with RF discharge, Diamond Relat Mater, 9, 548, 10.1016/S0925-9635(00)00209-0 Jacob, 2001, Flexural strength of heat-polymerized polymethyl methacrylate denture resin reinforced with glass, aramid or nylon fibers, J Prosthet Dent, 86, 424, 10.1067/mpr.2001.118564 Drummond, 2003, Static and cyclic loading of fiber loading of fiber-reinforced dental resin, Dent Mater, 19, 441, 10.1016/S0109-5641(02)00034-9 Vallittu, 2000, Effect of 180 weeks water storage on the flexural properties of E-glass a silica fiber acrylic resin composite, Int J Prostohodont, 13, 334 Lassila, 2002, The influence of short-term water storage on the flexural properties of unidirectional glass fiber-reinforced composite, Biomaterials, 23, 2221, 10.1016/S0142-9612(01)00355-6 Chai, 2005, Effect of water storage on the flexural properties of three glass fiber-reinforced composites, Int J Prosthodont, 18, 28