Modernizing Pharmaceutical Manufacturing: from Batch to Continuous Production

U.S. Pharmaceutical CGMPs for the 21st Century - A Risk-Based Approach. Maryland: Food and Drug Administration; 2004.

Myerson AS, Krumme M, Nasr M, Thomas H, Braatz RD. Control systems engineering in continuous pharmaceutical manufacturing May 20–21, 2014 continuous manufacturing symposium. J Pharm Sci. 2014. doi: 10.1002/jps.24311 .

3. D. Throckmorton. Statement to the House of Representatives, Subcommittee on Health, Committee on Energy & Commerce “Examining Drug Shortages and Recent Effort to Address Them”. 2014 Feburary 10.

Felder RM, Rousseau RW. Elementary principles of chemical processes. US: Wiley; 2005.

Allison G, Cain YT, Cooney C, Garcia T, Bizjak TG, Holte O, et al. Regulatory and quality considerations for continuous manufacturing. May 20–21, 2014 continuous manufacturing symposium. J Pharm Sci. 2015. doi: 10.1002/jps.24324 .

U.S. Guidance for Industry: Q7A good manufacturing practice guidance for active pharmaceutical ingredients. Maryland: Food and Drug Administration; 2001.

Mascia S, Heider PL, Zhang H, Lakerveld R, Benyahia B, Barton PI, et al. End-to-end continuous manufacturing of pharmaceuticals: integrated synthesis, purification, and final dosage formation. Angew Chem Int Ed. 2013;52:12359–63.

Malet-Sanz L, Susanne F. Continuous flow synthesis: a pharma perspective. J Med Chem. 2012;55:4062–98.

U.S. Guidance for Industry: Q8(2) Pharmaceutical Development. Maryland: Food and Drug Administration; 2009.

U.S. Guidance for Industry: Q9 Quality Risk Management. Maryland: Food and Drug Administration; 2006.

U.S. Guidance for Industry: Q10 Pharmaceutical Quality Systems. Maryland: Food and Drug Administration; 2009.

U.S. Guidance for Industry: Q8, Q9, and Q10 Questions and Answers. Maryland: Food and Drug Administration; 2011.

ICH Quality Implementation Working Group. Point to Consider: ICH-endorsed Guide for ICH Q8/Q9/Q10 Implementation. 2011.

U.S. Guidance for Industry: Q11 Development and Manufacture of Drug Substance. Maryland: Food and Drug Administration; 2012.

Schaber SD, Gerogiorgis DI, Ramachandran R, Evans JM, Barton PI, Trout BL. Economic analysis of integrated continuous and batch pharmaceutical manufacturing: a case study. Ind Eng Chem Res. 2011;50:10083–92.

Poechlauer P, Manley J, Broxterman R, Gregertsen B, Ridemark M. Continuous processing in the manufacture of active pharmaceutical ingredients and finished dosage forms: an industry perspective. Org Proc Res Dev. 2012;16:1586–90.

Webb D, Jamison TF. Continuous flow multi-step organic synthesis. Chem Sci. 2010;1(6):675–80.

Chen J, Sarma B, Evans JM, Myerson AS. Pharmaceutical crystallization. Crystal Growth Des. 2011;11:887–95.

Muzzio F. QbD for Continuous Manufacturing: CQAs, CMAs, CPPs, San Juan, PR: ERC-SOPS Presentation; 2014.

Byrn S, Futran M, Thomas H, Jayjock E, Maron N, Meyer RF, et al. Achieving continuous manufacturing for final dosage formation: challenges and how to meet them. May 20–21, 2014 continuous manufacturing symposium. J Pharm Sci. 2014. doi: 10.1002/jps.24247 .

Badman C, Trout BL. Achieving continuous manufacturing. May 20–21, 2014 continuous manufacturing symposium. J Pharm Sci. 2014. doi: 10.1002/jps.24246 .

Boukouvala F, Niotis V, Ramachandran R, Muzzio F, Ierapetritou MG. An integrated approach for dynamic flowsheet modeling and sensitivity analysis of a continuous tablet manufacturing process. Comput Chem Eng. 2012;42:30–47.

Benyahia B, Lakerveld R, Barton PI. A plant-wide dynamic model of a continuous pharmaceutical process. Ind Eng Chem Res. 2012;51:15393–412.

Lakerveld R, Benyahia B, Braatz RD, Barton PI. Model-based design of a plant-wide control strategy for a continuous pharmaceutical plant. AIChE J. 2013;59:3671–85.

Kvarnstrom B, Bergquist B. Improving traceability in continuous processes using flow simulations. Prod Plan Control. 2012;23:396–404.

Gao YJ, Vanarase A, Muzzio FJ, Ierapetritou M. Characterizing continuous powder mixing using residence time distribution. Chem Eng Sci. 2011;66:417–25.

Reitz E, Podhaisky H, Ely D, Thommes M. Residence time modeling of hot melt extrusion processes. Eur J Pharm Biopharm. 2013;85:1200–5.

Moe T. Perspectives on traceability in food manufacture. Trends Food Sci Tech. 1998;9:211–4.

U.S. The Code of Federal Regulations. 21 CFR 210.3(2). Washington, DC: The federal government; 2009.

ICH Q8. ICH Harmonised Tripartite Guideline: Pharmaceutical Development Q8(r2), Current Step 4 Version. Geneva, Switzerland: The International Conference on Harmonisation; 2009.

Yu LX, Amidon G, Khan MA, Hoag SW, Polli J, Raju GK, et al. Understanding pharmaceutical quality by design. AAPS J. 2014;16:771–83.

Singh R, Ierapetritou M, Ramachandran R. System-wide hybrid MPC-PID control of a continuous pharmaceutical tablet manufacturing process via direct compaction. Eur J Pharm Biopharm. 2013;85:1164–82.

Skoglund T, Dejmek P. Fuzzy traceability: a process simulation derived extension of the traceability concept in continuous food processing. Food Bioprod Process. 2007;85:354–9.

U.S. Guidance for Industry PAT - A Framework for Innovative Pharmaceutical Development, Manufacturing, and Quality Assurance. Maryland: Food and Drug Administration; 2004.

American Society for Testing and Materials (ASTM). E1655 Standard Practices for Infrared Multivariate Quantitative Analysis. United States: ASTM; 2012.

American Society for Testing and Materials (ASTM). D6122-13 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems. United States: ASTM; 2012.

American Society for Testing and Materials (ASTM). D6299-13 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance. United States: ASTM; 2012.

Waters T. Industrial Sampling Systems: Reliable Design and Maintenance for Process Analyzers.: Swagelok; 2013.

Vanarase AU, Jarvinen M, Paaso J, Muzzio FJ. Development of a methodology to estimate error in the on-line measurements of blend uniformity in a continuous powder mixing process. Powder Technol. 2013;241:263–71.

Wahl PR, Treffer D, Mohr S, Roblegg E, Koscher G, Khinast JG. Inline monitoring and a PAT strategy for pharmaceutical hot melt extrusion. Int J Pharm. 2013;455:159–68.

Markl D, Wahl PR, Menezes JC, Koller DM, Kavsek B, Francois K, et al. Supervisory control system for monitoring a pharmaceutical hot melt extrusion process. AAPS Pharm Sci Tech. 2013;14:1034–44.

Schilling EG, Neubauer DV. Acceptance sampling in quality control. Boca Raton: CRC Press; 2009.

Kourti T. The process analytical technology initiative and multivariate process analysis, monitoring and control. Anal Bioanal Chem. 2006;384:1043–8.

Kourti T. Application of latent variable methods to process control and multivariate statistical process control in industry. Int J Adapt Control Signal Process. 2005;19:213–46.