Modelling of the contact processes in a friction pair with selective-transfer

Popov, 2013, Method of reduction of dimensionality in contact and friction mechanics: a link-age between micro and macro scales, Friction, 1, 1, 10.1007/s40544-013-0005-3 Kraghelski, 1977 Jeyaprakash, 2020 Popov, 2015 Tudor, 1990 Matsuda, 2016, Real contact area and friction property of rubber with two-dimensional regular wavy surface, Tribol Int, 93, 523, 10.1016/j.triboint.2014.11.011 Sahli, 2018, Evolution of real contact area under shear and the value of static friction of soft materials, Proc of the Nat Acad of Sci U S A, 115, 471, 10.1073/pnas.1706434115 Zhai, 2016, The role of surface structure in normal contact stiffness, Exp Mech, 56, 359, 10.1007/s11340-015-0107-0 Garbar, 1978, Metal surface layer structure formation under sliding friction, Wear, 51, 327, 10.1016/0043-1648(78)90271-5 Garkunov, 2001, 616 Ilie, 2002 Garkunov, 2007 Kolubaev, 2007, The Evolution of the surface layers on metals in sliding friction, J Frict Wear, 28, 514, 10.3103/S1068366607060050 Bhushan, 1998, Contact mechanics of rough surfaces in tribology: multiple asperity contact, Tribol Lett, 4, 1, 10.1023/A:1019186601445 Carbone, 2011, Contact mechanics of rough surfaces: a comparison between theories, Meccanica, 46, 557, 10.1007/s11012-010-9315-y Garkunov, 1981 Ilie, 2006, Comparative analysis of tribological performances of materials that can achieve thin layers from selective transfer, J Balk Tribol Assoc, 12, 404 George, 1995, Friction surface phenomena. Chapter 3: physical chemistry of contact interaction at selective transfer, Tribology, S29, 77 Kotnarowski, 2010, Selective transfer phenomenon in friction couples lubricated with base oils, Solid State Phenom, 165, 97, 10.4028/www.scientific.net/SSP.165.97 Bakhshaliev, 2012, Mathematical modelling of the wear process of the nanosurface of sliding bearings of self-lubricating materials, Int J Mech Appl, 2, 43 Nielsen, 2016, Modelling of real area of contact between tool and workpiece in metal forming processes including the influence of subsurface deformation, CIRP Ann, 65, 261, 10.1016/j.cirp.2016.04.126 dos Santos, 2017 Khoei, 2008, Modeling of large deformation frictional contact in powder compaction processes, Appl Math Model, 32, 775, 10.1016/j.apm.2007.02.017 Khoei, 2010, Modeling of large deformation – large sliding contact via the penalty X-FEM technique, Comp Mater Sci, 48, 471, 10.1016/j.commatsci.2010.02.008 Cheng, 1994, Micromechanics modelling of crack initiation under contact fatigue, J Tribol ASME, 116, 2, 10.1115/1.2927042 Geraci, 2016, Micromechanical boundary element modelling of transgranular and intergranular cohesive cracking in polycrystalline materials, Key Eng Mater, 713, 54, 10.4028/www.scientific.net/KEM.713.54 Ilie, 1993, Contact process in a friction couple with selective transfer, vol. 1, 66 Ilie, 2018, Tribological behaviour of the steel/bronze friction pair (journal bearing type) functioning with selective mass transfer, Int J Heat Mass Trans, 124, 655, 10.1016/j.ijheatmasstransfer.2018.03.107 Bhadeshia, 2012, Steels for bearings, Prog Mater Sci, 57, 268, 10.1016/j.pmatsci.2011.06.002 Matthews, 2007, Tribological coatings: contact mechanisms and selection, J Phys D Appl Phys, 40, 5463, 10.1088/0022-3727/40/18/S07 Popov, 2010 Kenneth, 2001 Barber, 2000, Contact mechanics, Int J Solids Struct, 37, 29, 10.1016/S0020-7683(99)00075-X Ciavarella, 2019, The role of adhesion in contact mechanics, J R Soc Interface, 16, 20180738, 10.1098/rsif.2018.0738 Cretu, 2002, vol. I Barber, 2018 Hyun, 2007, Elastic contact between rough surfaces: effect of roughness at large and small wavelengths, Tribol Int, 40, 1413, 10.1016/j.triboint.2007.02.003 Jackson, 2011, On the modeling of elastic contact between rough surfaces, Tribol Trans, 54, 300, 10.1080/10402004.2010.542277 Laursen, 2002 Kuksenova, 1990, Choice of dispersion media for lubrication, realising the phenomenon of selective transfer in friction of copper alloy – steel pair, Masinostr Vestn, 9, 20 Xiao, 2018, Investigation into the normal contact stiffness of rough surface in line contact mixed elastohydrodynamic lubrication, J Tribol ASME, 61, 742 Ilie, 2015, Investigation into the effect of concentration of benzotriazole on the selective layer surface in the chemical mechanical planarization process, J Mater Eng Perform, 24, 4919, 10.1007/s11665-015-1751-3 Allara, 2009, A model for the characterization of friction contacts in turbine blades, J Sound Vib, 320, 527, 10.1016/j.jsv.2008.08.016