Mô hình hóa tương tác của dòng chảy rối cường độ cao không ổn định với các yếu tố truyền nhiệt và khối lượng trong lớp biên trên bề mặt

R. L. Simpson, R. J. Moffat, and W. M. Kays, “The Turbulent Boundary Layer on a Porous Plate: Experimental Skin Friction with Variable Injection and Suction,” Int. J. Heat Mass Transfer 12 (7), 771–789 (1969). R. L. Simpson, “The Effect of a Discontinuity in Wall Blowing on the Turbulent Incompressible Boundary Layer,” Int. J. HeatMass Transfer 14 (12), 2083–2097 (1971). R. L. Simpson, “Characteristics of Turbulent Boundary Layers at Low Reynolds Numbers with and without Transpiration,” J. Fluid Mech. 42 (4), 783–799 (1970). V. A. Aleksin and V. D. Sovershennyi, “Numerical Calculation of a Turbulent Boundary Layer with a Sharp Change in the Boundary Conditions,” in: Turbulent Flows (Nauka, Moscow, 1977) [in Russian]. V. A. Aleksin, V. D. Sovershennyi, and S. P. Chikova, “Calculation of the Turbulent Boundary Layer at Surfaces with Porous Sections,” Fluid Dynamics 13 (1), 51–57 (1978). P. M. Moretti and W. M. Kays, “Heat Transfer to a Turbulent Boundary–Layer with Varying Freestream Velocity and Varying Surface Temperature, an Experimental Study,” Intern. J. Heat Mass Transfer 8 (9), 1187–1202 (1965). A. M. Savill (Ed.), Transition Modelling for Turbomachinery II: An Updated Summ. of ERCOFTAC Trans. SIG Progr. 2nd Workshop (Cambridge University Press, Cambridge, 1994). E. Ya. Epik, “Heat Transfer Effects in Transitions,” in: Proc. on Turbulent Heat Transfer: Engineering Foundation Conf. 1996 (New York; San Diego, California, 1996), pp. 1–47. A. M. Savill, “Evaluation of Turbulent Models for Predicting Transition in Turbomachinery Flows,” in Transition Modelling for Turbomachinery III: A Final Summ. of ERCOFTAC Trans. SIG Progr. 3rd Workshop (Cambridge University Press, Cambridge, 1995), pp. 3–13. S. A. Gaponov and N.M. Terekhova, “Joint Effect of Heat and Mass Transfer on the Compressible Boundary Layer Stability,” Fluid Dynamics 51 (1), 45–55 (2016). V. A. Aleksin and S. N. Kazeykin, “Modeling the Effect of Freestream Turbulence on Unsteady Boundary Layer Flow,” Fluid Dynamics 35 (6), 846–857 (2000). V. A. Aleksin, “Simulation of the Effect of the Freestream Turbulence Parameters on Heat Transfer in an Unsteady Boundary Layer,” Fluid Dynamics 38 (2), 237–249 (2003). A. S. Ginevskii, V. A. Ioselevich, A. V. Kolesnikov, Yu. V. Lapin, V. A. Pilipenko, and A. N. Sekundov, “Methods of Calculating the Turbulent Boundary Layer,” in: Advances in Science and Engineering. Fluid Mechanics, Vol. 11 (VINITI,Moscow, 1978) [in Russian], pp. 155–304. V. C. Patel, W. Rodi, and G. Scheuerer, “TurbulenceModels forNear–Wall and Low Reynolds Number Flows: a Review,” AIAA Journal 23 (9), 1308–1319 (1985). W. P. Jones and B. E. Launder, “The Calculation of Low–Reynolds–numberPhenomena with a Two–Equation Model of Turbulence,” Intern. J. Heat and Mass Transfer 16 (6), 1119–1130 (1973). K.–Y. Chien, “Predictions of Channel and Boundary–Layer Flows with a Low–Reynolds–Number Turbulence Model,” AIAA Journal 20 (1), 33–38 (1982). B. J. Abu–Ghannam and R. Shaw, “Natural Transition of Boundary Layers—the Effect of Turbulence, Pressure Gradient, and Flow History,” J.Mech. Engng. Sci. 22 (5), 213–228 (1980). V. A. Aleksin, “Simulation of the Effect of High–Intensity Turbulence Flow Parameters on Unsteady Boundary Layers with Streamwise Pressure Gradients,” Fluid Dynamics 43 (2), 274–286 (2008). V. A. Aleksin, “Modeling the Freestream Parameter Effect on Unsteady Boundary Layers with Positive Pressure Gradients,” Fluid Dynamics 47 (1), 70–83 (2012). V. A. Aleksin and A. M. Kudryakov, “Unsteady Periodic Boundary Layer with Backflow Zones,” Fluid Dynamics 26 (5), 703–711 (1991). J. Cousteix, “Three–Dimensional and Unsteady Boundary–Layer Computations,” Annu. Rev. Fluid Mech. 18, 173–196 (1986). T. Cebeci, “Calculation of Unsteady Two–Dimensional Laminar and Turbulent Boundary Layers with Fluctuations in External Velocity,” Proc. Roy. Soc. London. Ser. A 355 (1681), 225–238 (1977). S. K. F. Karlsson, “An Unsteady Turbulent Boundary Layer,” J. Fluid Mech. 5 (4), 622–636 (1959).