Modelling of spray and combustion processes by using the Eulerian multiphase approach and detailed chemical kinetics

Katrašnik, 2007, Hybridization of powertrain and downsizing of IC engine – A way to reduce fuel consumption and pollutant emissions – Part 1, Energy Convers Manage, 48, 1411, 10.1016/j.enconman.2006.12.004 Niemisto J, Saavalainen P, Pongracz E, Keiski RL. Biobutanol as a potential sustainable biofuel – assessment of lignocellulosic and waste-based feedstocks. J Sustain Dev Energy, Water Environ Syst n.d.; 1: 58–77. Kozarac, 2014, Analysis of benefits of using internal exhaust gas recirculation in biogas-fueled HCCI engines, Energy Convers Manage, 87, 1186, 10.1016/j.enconman.2014.04.085 Fu-shui, 2008, Validation and modification of WAVE spray model for diesel combustion simulation, Fuel, 87, 3420, 10.1016/j.fuel.2008.05.001 Iyer, 1997, Penetration and dispersion of transient gas jets and sprays, Combust Sci Technol, 130, 315, 10.1080/00102209708935747 Hallmann, 1995, Computation of turbulent evaporating sprays: Eulerian versus lagrangian approach, J Eng Gas Turbines Power, 117, 112, 10.1115/1.2812758 Collazo, 2009, Simulation and experimental validation of a methanol burner, Fuel, 88, 326, 10.1016/j.fuel.2008.09.003 Gutheil, 1993, Numerical investigation of the ignition of dilute fuel sprays including detailed chemistry, Combust Flame, 93, 239, 10.1016/0010-2180(93)90106-D Ge, 2008, Simulation of a turbulent spray flame using coupled PDF gas phase and spray flamelet modeling, Combust Flame, 153, 173, 10.1016/j.combustflame.2007.10.019 Düwel, 2007, Experimental and numerical characterization of a turbulent spray flame, Proc Combust Inst, 31, 2247, 10.1016/j.proci.2006.07.111 Zhu S, Roekaerts D, Van Der Meer T. Numerical study of a methanol spray flame. Seventh Mediterr. Combust. Symp.; 2011, p. 1–8. Som, 2011, Effect of nozzle orifice geometry on spray, combustion, and emission characteristics under diesel engine conditions, Fuel, 90, 1267, 10.1016/j.fuel.2010.10.048 Shuai, 2009, Evaluation of the effects of injection timing and rate-shape on diesel low temperature combustion using advanced CFD modeling, Fuel, 88, 1235, 10.1016/j.fuel.2009.01.012 Petranović, 2014, Towards a more sustainable transport sector by numerically simulating fuel spray and pollutant formation in diesel engines, J Clean Prod Guo, 2002, A pure Eulerian model for simulating dilute spray combustion, Fuel, 81, 2131, 10.1016/S0016-2361(02)00140-0 Beck, 2003, Simulation of water and other non-fuel sprays using a new spray model, At Sprays, 13, 1, 10.1615/AtomizSpr.v13.i1.10 Dhuchakallaya, 2010, Application of spray combustion simulation in DI diesel engine, Appl Energy, 87, 1427, 10.1016/j.apenergy.2009.08.029 Xue, 2015, An Eulerian CFD model and X-ray radiography for coupled nozzle flow and spray in internal combustion engines, Int J Multiph Flow, 70, 77, 10.1016/j.ijmultiphaseflow.2014.11.012 Bekdemir, 2013, Predicting diesel combustion characteristics with Large-Eddy Simulations including tabulated chemical kinetics, Proc Combust Inst, 34, 3067, 10.1016/j.proci.2012.06.160 Boileau, 2007, Investigation of two-fluid methods for large eddy simulation of spray combustion in gas turbines, Flow, Turbul Combust, 80, 291, 10.1007/s10494-007-9123-1 Chrigui, 2012, Partially premixed reacting acetone spray using LES and FGM tabulated chemistry, Combust Flame, 159, 2718, 10.1016/j.combustflame.2012.03.009 Pickett L. European Combustion Network. <http://www.sandia.gov/ecn/>; 2014. Drew DA, Passman SL. Theory of multicomponent fluids; 1998. FIRE manual 2013. Graz; 2013. Reitz, 1987, Modeling atomization processes in high-pressure vaporizing sprays, At Spray Technol, 3, 309 O’Rourke, 1989, Statistical properties and numerical implementation of a model for droplet dispersion in a turbulent gas, J Comput Phys, 83, 345, 10.1016/0021-9991(89)90123-X Petranović Z, Edelbauer W, Vujanović M DN. The O’Rourke droplet collision model for the Euler-Eulerian framework. Proc. 26th Conf. Liq. At. Spray Syst.; 2014. Vujanović, 2015, Numerical modelling of diesel spray using the Eulerian multiphase approach, Energy Convers Manage, 10.1016/j.enconman.2015.03.040 Abramzon, 1989, Droplet vaporization model for spray combustion calculations, Int J Heat Mass Transf, 32, 1605, 10.1016/0017-9310(89)90043-4 Robert J. Kee Fmremjam. CHEMKIN-III: A Fortran Chemical Kinetics Package for the Analysis of Gas Phase Chemical and Plasma Kinetics. Sandia National Laboratories Report n.d. Sarathy, 2011, Comprehensive chemical kinetic modeling of the oxidation of 2-methylalkanes from C7 to C20, Combust Flame, 158, 2338, 10.1016/j.combustflame.2011.05.007 Luo, 2014, Development and validation of an n-dodecane skeletal mechanism forspray combustion applications, Combust Theory Model, 18, 187, 10.1080/13647830.2013.872807 Fuel/Engine Interactions. <http://books.sae.org/r-409/>; n.d. [accessed 28.04.15]. Hanjalić, 2004, A robust near-wall elliptic-relaxation eddy-viscosity turbulence model for CFD, Int J Heat Fluid Flow, 25, 1047, 10.1016/j.ijheatfluidflow.2004.07.005 Naber, 1996, Effects of gas density and vaporization on penetration and dispersion of diesel sprays Siebers, 1999, Scaling liquid-phase fuel penetration in diesel sprays based on mixing-limited vaporization Idicheria, 2007, Quantitative mixing measurements in a vaporizing diesel spray by Rayleigh Imaging, SAE Int J Eng, 01, 776 Pickett, 2009, Visualization of diesel spray penetration, cool-flame, ignition, high- temperature combustion, and soot formation using high-speed imaging, SAE Int J Eng, 2, 439, 10.4271/2009-01-0658 Pickett, 2011, Relationship between diesel fuel spray vapor penetration/dispersion and local fuel mixture fraction, SAE Int J Eng, 4, 764, 10.4271/2011-01-0686 Pickett, 2010, Comparison of diesel spray combustion in different high-temperature, high-pressure facilities, SAE Int J Eng, 3, 156, 10.4271/2010-01-2106 Pickett LM, Genzale CL, Manin J, Malbec L-M, Hermant L. Measurement Uncertainty of liquid penetration in evaporating diesel sprays. ILASS-Americas, Ventura, California; 2011, p. Paper No. 2011–111.