Modeling of forces and material removal rate in ultrasound assisted magnetorheological polishing (UAMP) of sapphire

Spadavecchia, 2005, Au nanoparticles prepared by physical method on Si and sapphire substrates for biosensor applications, J. Phys. Chem. B, 109, 17347, 10.1021/jp053194j Jiang, 2008, Optically transparent polycrystalline Al2O3 produced by spark plasmasintering, J. Am. Ceram. Soc., 91, 151, 10.1111/j.1551-2916.2007.02086.x Pinkas, 2010, Thermal healing of the sub-surface damage layer in sapphire, Mater. Chem. Phys., 124, 323, 10.1016/j.matchemphys.2010.06.041 Haney, 2011, Analysis of interacting cracks due to sequential indentations on sapphire, Acta Mater., 59, 3528, 10.1016/j.actamat.2011.02.026 Akselrod, 2012, Modern trends in crystal growth and new applications of sapphire, J. Cryst. Growth, 360, 134, 10.1016/j.jcrysgro.2011.12.038 Gu, 2019, Fundamental study on damage-free machining of sapphire: revealing damage mechanisms via combining elastic stress fields and crystallographic structure, Ceram. Int., 45, 20684, 10.1016/j.ceramint.2019.07.052 Wan, 2019, Investigation on ultra-precision lapping of A-plane and C-plane sapphires, Ceram. Int., 45, 12106, 10.1016/j.ceramint.2019.03.110 Gu, 2020, Understanding the damage evolution of sapphire under scratching from AE signals, Ceram. Int., 46, 26085, 10.1016/j.ceramint.2020.07.103 Jiao, 2013, Fundamental performance of magnetic compound fluid (MCF) wheel in ultra–fine surface finishing of optical glass, Int. J. Mach. Tool. Manuf., 75, 109, 10.1016/j.ijmachtools.2013.09.003 Kordonski, 1996, Magnetorheological finishing, Int. J. Mod. Phys. B, 10, 2837, 10.1142/S0217979296001288 Singh, 2011, Design and development of nanofinishing process for 3D surfaces using ball end MR finishing tool, Int. J. Mach. Tool. Manuf., 51, 142, 10.1016/j.ijmachtools.2010.10.002 Wang, 2016, Polishing characteristics and mechanism in magnetorheological planarization using a permanent magnetic yoke with translational movement, Precis. Eng., 43, 93, 10.1016/j.precisioneng.2015.06.014 Jiao, 2013, Fundamental performance of magnetic compound fluid (MCF) wheel in ultra-fine surface finishing of optical glass, Int. J. Mach. Tool. Manuf., 75, 109, 10.1016/j.ijmachtools.2013.09.003 Song, 2020, Annular surface micromachining of titanium tubes using a magnetorheological polishing technique, Micromachines, 11, 1, 10.3390/mi11030314 Liang, 2019, Material removal mechanisms in chemical-magnetorheological compound finishing, Int. J. Adv. Manuf. Technol., 103, 1337, 10.1007/s00170-019-03594-5 Pan, 2020, Optimization study on magnetorheological fluid components and process parameters of cluster magnetorheological finishing with dynamic magnetic field for sapphire substrates, Smart Mater. Struct., 29, 1, 10.1088/1361-665X/abb988 Saraswathamma, 2015, Experimental investigation into ball end magnetorheological finishing of silicon, Precis. Eng., 42, 218, 10.1016/j.precisioneng.2015.05.003 Iqbal, 2019, Experimental investigations into transient roughness reduction in ball-end magneto-rheological finishing process, Mater. Manuf. Process., 34, 224, 10.1080/10426914.2018.1512131 Kansal, 2018, Magnetorheological nano-finishing of diamagnetic material using permanent magnets tool, Precis. Eng., 51, 30, 10.1016/j.precisioneng.2017.07.003 Yin, 2004, A comparative study: polishing characteristics and its mechanisms of three vibration modes in vibration-assisted magnetic abrasive polishing, Int. J. Mach. Tool. Manuf., 44, 383, 10.1016/j.ijmachtools.2003.10.002 Wang, 2007, Study on optical polishing of optical glass by means of ultrasonic-magnetorheological compound finishing, Proc. SPIE, 6722, 1 Zhang, 2009, Study on the surface quality of optical glass in ultrasonic-magnetorheological compound finishing, Key Eng. Mater., 389–390, 181 Zhang, 2009, Experimental study on polishing characteristics of ultrasonic-magnetorheological compound finishing, Adv. Mater. Res., 76–78, 235, 10.4028/www.scientific.net/AMR.76-78.235 Zhai, 2021, Effect of core-diameters and shell-thicknesses of Fe3O4/SiO2 composite abrasives on the performance of ultrasound-assisted magnetorheological polishing for sapphire, Colloid. Surf. A Physicochem. Eng. Asp., 625, 10.1016/j.colsurfa.2021.126871 DeGroote, 2007, Removal rate model for magnetorheological finishing of glass, Appl. Opt., 46, 7927, 10.1364/AO.46.007927 Sidpara, 2011, Experimental investigations into forces during magnetorheological fluid based finishing process, Int. J. Mach. Tool. Manuf., 51, 358, 10.1016/j.ijmachtools.2010.12.002 Miao, 2010, Process parameter effects on material removal in magnetorheological finishing of borosilicate glass, Appl. Opt., 49, 1951, 10.1364/AO.49.001951 Das, 2012, Computational fluid dynamics simulation and experimental investigations into the magnetic field-assisted nano-finishing process, Proc. Inst. Mech. Eng. B J. Eng., 226, 1143, 10.1177/0954405412440230 Zhan, 2011, Study on error compensation of machining force in aspheric surfaces polishing by profile-adaptive hybrid movement-force control, Int. J. Adv. Manuf. Technol., 54, 879, 10.1007/s00170-010-2999-2 Cheng, 2005, Magnetic Bingham fluid-assisted deterministic polishing for super-smooth surfaces, Chin. Sci. Bull., 50, 172 Cheng, 2015, Surface roughness and removal rate in magnetorheological finishing of a subsurface damage free surface, Prog. Nat. Sci., 15, 538 Song, 2020, Particle-chain evolution and constitutive model of magnetorheological polishing fluids based on hexagonal close-packed structure, Smart Mater. Struct., 29, 10.1088/1361-665X/ab73e6 Yi, 2010, A magnetic-dipoles-based micro-macro constitutive model for MRFs subjected to shear deformation, Rheol. Acta, 49, 815, 10.1007/s00397-010-0468-3 Preston, 1927, The theory and design of plate glass polishing machines, J. Soc. Glass Technol., 11, 214 Shorey, 2000 Kum, 2013, Surface roughness and material removal models for magnetorheological finishing, Int. J. Abras. Technol., 6, 70, 10.1504/IJAT.2013.053170 Miao, 2009, Shear stress in magnetorheological finishing for glasses, Appl. Opt., 48, 2585, 10.1364/AO.48.002585 Guo, 2014, Effects of pressure and shear stress on material removal rate in ultra-fine polishing of optical glass with magnetic compound fluid slurry, J. Mater. Process. Technol., 214, 2759, 10.1016/j.jmatprotec.2014.06.014 Sidpara, 2011, Effect of fluid composition on nano-finishing of single crystal silicon by magnetic field assisted finishing process, Int. J. Adv. Manuf. Technol., 55, 243, 10.1007/s00170-010-3032-5 Peng, 2007, Analysis of the magnetomechanical behavior of MRFs based on micromechanics incorporating a statistical approach, Smart Mater. Struct., 16, 2477, 10.1088/0964-1726/16/6/051 Zhang, 2013, Mathematical model for cutting force in rotary ultrasonic face milling of brittle materials, Int. J. Adv. Manuf. Technol., 69, 161, 10.1007/s00170-013-5004-z Yuan, 2015, Development of a cutting force prediction model based on brittle fracture for carbon fiber reinforced polymers for rotary ultrasonic drilling, Int. J. Adv. Manuf. Technol., 81, 1223, 10.1007/s00170-015-7269-x Karimi, 1986, Cavitation erosion of materials, Int. Mater. Rev., 31, 1, 10.1179/imr.1986.31.1.1 Xu, 2011, Effects of the ultrasonic flexural vibration on the interaction between the abrasive particles; pad and sapphire substrate during chemical mechanical polishing (CMP), Appl. Surf. Sci., 257, 2905, 10.1016/j.apsusc.2010.10.088 Makino, 1983, Chemical effects of ultrasound on aqueous solutions. Formation of hydroxyl radicals and hydrogen atoms, J. Phys. Chem., 87, 1369, 10.1021/j100231a020