Modeling of asphaltene particle deposition from turbulent oil flow in tubing: Model validation and a parametric study

Creek, 2005, Freedom of action in the state of asphaltenes: escape from conventional wisdom, Energy & Fuels, 19, 1212, 10.1021/ef049778m Hirschberg, 1984, Influence of temperature and pressure on asphaltene flocculation, Soc. Petrol Eng. J., 24, 283, 10.2118/11202-PA Rassamdana, 1996, Asphalt flocculation and deposition: I. The onset of precipitation, AIChE J., 42, 10, 10.1002/aic.690420104 Nghiem, 1997, Modeling asphaltene precipitation during primary depletion, SPE J., 2, 170, 10.2118/36106-PA 2000 Dolati, 2015, Asphaltene instability trends to predict asphaltene precipitation onset pressure: constrained for light and heavy crude oils, J. Dispers Sci. Technol., 36, 103, 10.1080/01932691.2014.881261 Kamari, 2015, Compositional model for estimating asphaltene precipitation conditions in live reservoir oil systems, J. Dispers Sci. Technol., 36, 301, 10.1080/01932691.2014.896220 Subramanian, 2016, Asphaltene precipitation models: a review, J. Dispers Sci. Technol., 37, 1027, 10.1080/01932691.2015.1065418 Behbahani, 2013, A modified scaling equation based on properties of bottom hole live oil for asphaltene precipitation estimation under pressure depletion and gas injection conditions, Fluid Phase Equilib, 358, 212, 10.1016/j.fluid.2013.08.027 Juyal, 2013, Joint industrial case study for asphaltene deposition, Energy & Fuels, 27, 1899, 10.1021/ef301956x Akbarzadeh, 2011, Asphaltene deposition measurement and modeling for flow assurance of tubings and flow lines, Energy & Fuels, 26, 495, 10.1021/ef2009474 1995 Friedlander, 1957, Deposition of suspended particles from turbulent gas streams, Ind Eng. Chem., 49, 1151, 10.1021/ie50571a039 Ramirez-Jaramillo, 2006, Modeling asphaltene deposition in production pipelines, Energy & Fuels, 20, 1184, 10.1021/ef050262s Kern, 1959, A theoretical analysis of thermal surface fouling, Br. Chem. Eng., 4, 258 Akbarzadeh, 2011 Sippola, 2002 Paes, 2015, Study of asphaltene deposition in wellbores during turbulent flow, J. Petrol Sci. Eng., 129, 77, 10.1016/j.petrol.2015.02.010 Epstein, 1997, Elements of particle deposition onto nonporous solid surfaces parallel to suspension flows, Exp. Therm. Fluid Sci., 14, 323, 10.1016/S0894-1777(96)00135-5 Shirdel, 2013 Reichardt, 1956 Bott, 1995 Liu, 1974, Experimental observation of aerosol deposition in turbulent flow, J. Aerosol Sci., 5, 145, 10.1016/0021-8502(74)90046-9 Fan, 1993, A sublayer model for turbulent deposition of particles in vertical ducts with smooth and rough surfaces, J. Aerosol Sci., 24, 45, 10.1016/0021-8502(93)90084-M Shams, 2000, A sublayer model for deposition of nano-and micro-particles in turbulent flows, Chem. Eng. Sci., 55, 6097, 10.1016/S0009-2509(00)00414-0 Guha, 2008 Wood, 1981, A simple method for the calculation of turbulent deposition to smooth and rough surfaces, J. Aerosol Sci., 12, 275, 10.1016/0021-8502(81)90127-0 Papavergos, 1984, Particle deposition behaviour from turbulent flows, Chem. Eng. Res. Des., 62, 275 Watkinson, 1968 Wells, 1967, Transport of small particles to vertical surfaces, Br. J. Appl. Phys., 18, 1793, 10.1088/0508-3443/18/12/317 Jamialahmadi, 2009, Measurement and prediction of the rate of deposition of flocculated asphaltene particles from oil, Int. J. Heat Mass Transf., 52, 4624, 10.1016/j.ijheatmasstransfer.2009.01.049 Kurup, 2011, Development and application of an asphaltene deposition tool (ADEPT) for well bores, Energy & Fuels, 25, 4506, 10.1021/ef200785v