Modeling of Experimental Adsorption Isotherm Data

Information (Switzerland) - Tập 6 Số 1 - Trang 14-22
Xunjun Chen1,2
1College of Computer and Information, Hohai University, Nanjing 210098, China
2School of Mathematical and Information Engineering, Taizhou University, Linhai 317000, China

Tóm tắt

Adsorption is considered to be one of the most effective technologies widely used in global environmental protection areas. Modeling of experimental adsorption isotherm data is an essential way for predicting the mechanisms of adsorption, which will lead to an improvement in the area of adsorption science. In this paper, we employed three isotherm models, namely: Langmuir, Freundlich, and Dubinin-Radushkevich to correlate four sets of experimental adsorption isotherm data, which were obtained by batch tests in lab. The linearized and non-linearized isotherm models were compared and discussed. In order to determine the best fit isotherm model, the correlation coefficient (r2) and standard errors (S.E.) for each parameter were used to evaluate the data. The modeling results showed that non-linear Langmuir model could fit the data better than others, with relatively higher r2 values and smaller S.E. The linear Langmuir model had the highest value of r2, however, the maximum adsorption capacities estimated from linear Langmuir model were deviated from the experimental data.

Từ khóa


Tài liệu tham khảo

Yuan, 2009, Phosphorus fixation in lake sediments using LaCl3-modified clays, Ecol. Eng., 35, 1599, 10.1016/j.ecoleng.2008.08.002

Eilbeck, W.J., and Mattock, G. (1987). Chemical Processes in Wastewater Treatment, Wiley.

Zhou, 2012, Phosphorus removal from wastewater using nano-particulates of hydrated ferric oxide doped activated carbon fiber prepared by Sol-Gel method, Chem. Eng. J., 200, 619, 10.1016/j.cej.2012.06.123

Long, 2011, Removal of phosphate from aqueous solution by magnetic Fe-Zr binary oxide, Chem. Eng. J., 171, 448, 10.1016/j.cej.2011.03.102

Yan, 2010, Adsorption of phosphate from aqueous solution by hydroxy-aluminum, hydroxy-iron and hydroxy-iron-aluminum pillared bentonites, J. Hazard. Mater., 79, 244, 10.1016/j.jhazmat.2010.02.086

Rodrigues, 2012, Adsorption of phosphate from aqueous solution by hydrous zirconium oxide, Environ. Technol., 33, 1345, 10.1080/09593330.2011.632651

Mao, 2012, Effects of pH, floc age and organic compounds on the removal of phosphate by pre-polymerized hydrous ferric oxides, Sep. Purif. Technol., 91, 38, 10.1016/j.seppur.2011.09.045

Huang, 2013, Fabrication of Fe-coordinated diamino-functionalized SBA-15 with hierarchical porosity for phosphate removal, Mater. Lett., 99, 154, 10.1016/j.matlet.2013.03.017

Huang, 2013, One-pot synthesis of Fe(III)-coordinated diamino-functionalized mesoporous silica: Effect of functionalization degrees on structures and phosphate adsorption, Microporous Mesoporous Mater., 170, 200, 10.1016/j.micromeso.2012.10.027

Thompson, 2001, The treatment of pulp and paper mill effluent: A review, Bioresour. Technol., 77, 275, 10.1016/S0960-8524(00)00060-2

Langmuir, 1916, The constitution and fundamental properties of solids and liquids, J. Am. Chem. Soc., 38, 2221, 10.1021/ja02268a002

Freundlich, 1906, Over the adsorption in solution, J. Phys. Chem., 57, 385

Temkin, 1940, Kinetics of Ammonia Synthesis on Promoted Iron Catalyst, Acta Physiochim. URSS, 12, 217

Dubinin, 1947, The equation of the characteristic curve of the activated charcoal, Proc. Acad. Sci. USSR Phys. Chem. Sect., 55, 331

Foo, 2010, Insights into the modeling of adsorption isotherm systems, Chem. Eng. J., 156, 2, 10.1016/j.cej.2009.09.013

Huang, 2012, One-pot synthesis of mesoporous MCM-41 with different functionalization levels and their adsorption abilities to phosphate, Adv. Mater. Res., 476, 1969, 10.4028/www.scientific.net/AMR.476-478.1969

Kinniburgh, 1986, General purpose adsorption isotherms, Environ. Sci. Technol., 20, 895, 10.1021/es00151a008

Ho, 2005, Isotherms for the sorption of lead onto peat: Comparison of linear and non-linear methods, Pol. J. Environ. Stud., 15, 81