Modeling microporosity in aluminum–silicon alloys: a review

Major, 1994, The Lincoln Mark VIII cast aluminum suspension control arm parallel development, SAE Trans. J. Mater. Manuf., 103, 635 Couper, 1990, Casting defects and the fatigue behaviour of an aluminium casting alloy, Fatigue Fract. Eng. Mater. Struct., 13, 213, 10.1111/j.1460-2695.1990.tb00594.x Major, 1998, Porosity control and fatigue behavior in A356-T61 aluminum alloy, AFS Trans., 105, 901 P.D. Lee, J.F. Major, L. Hofmann, Solidification model validation for an aluminum alloy cylinder head, in: Numerical Simulation of Casting Solidification in Automotive Applications, 1991, pp. 231–251 Szekely, 1994, Some perspectives on the mathematical modeling of materials processing operations, Modelling Simulation Mater. Sci. Eng. UK, 2, 809, 10.1088/0965-0393/2/4/002 G. Upadhya, A.J. Paul, A state-of-the-art review of solidification modeling of casting processes, in: EPD Congress, 1994, pp. 967–982 Ransley, 1948, The solubility of hydrogen in liquid and solid aluminium, J. Inst. Met., 74, 599 Whittenberger, 1952, Origin of porosity in castings of magnesium–aluminum and other alloys, J. Met., 409 Walther, 1956, Mechanism for pore formation in solidifying metals, AFS Trans., 64, 658 Piwonka, 1966, Pore formation in solidification, AIME Met. Soc. Trans., 236, 1157 Pellini, 1953, Factors which determine riser adequacy and feeding range, AFS Trans., 61, 61 K.E. Tynelius, A parametric study of the evolution of microporosity in Al–Si foundry alloys, PhD, Drexel University, 1992 Tynelius, 1994, A parametric study of microporosity in the A356 casting alloy system, AFS Trans., 101, 401 Roy, 1996, Statistical analysis of porosity in Al–9 wt.% Si–3 wt.% Cu–X alloy systems, J. Mater. Sci., 31, 4725, 10.1007/BF00355855 G. Boudreault, A.M. Samuel, F.H. Samuel, H.W. Doty, Porosity formation in 319 aluminum alloy sand castings in relation to product quality for automotive applications, in: International Symposium on Light Metals 1997 Metaux Legers as held at the 36th Annual Conference of Metallurgists of CIM, 1997, pp. 369–384 Irani, 1969, Casting and mold design effects on shrinkage porosity of light alloys, AFS Trans., 77, 208 Niyama, 1982, A method of shrinkage prediction and its application to steel casting practice, AFS Int. Cast Met. J., 9, 52 Pathak, 1984, Phenomenological analysis of feeding in aluminum base alloys, AFS Trans., 8, 671 Murali, 1987, Pore nucleation and growth in castings, Trans. Indian Inst. Met., 40, 101 Lee, 1990, Modeling of feeding behavior of solidifying Al–Si-.3 mg alloy plate casting, Metall. Trans. B, 21, 715, 10.1007/BF02654250 V. Laurent, C. Rigault, An Experimental and Numerical Study of Criteria Functions for Predicting Microporosity in Cast Aluminium Alloys, AFS, 1992 Viswanathan, 1993, The application of quality criteria for the prediction of porosity in the design of casting processes, vol. VI Spittle, 1994, The Niyama function and its proposed application to microporsity prediction, Cast Met., 7, 51, 10.1080/09534962.1994.11819163 Suri, 1995, Determination of correlation factors for prediction of shrinkage in castings. I. Prediction of microporosity in castings; a generalized criterion, AFS Trans., 102, 861 Sigworth, 1995, Porosity formation in modified and unmodified aluminum–silicon alloy castings, AFS Trans., 102, 245 R.P. Taylor, J.T. Berry, R.A. Overfelt, Parallel derivation and comparison of feeding-resistance porosity criteria functions for castings, in: The 1996 31st ASME National Heat Transfer Conference (Part 1 of 8), 3–6 August 1996, Houston, TX, USA, 1996, pp. 69–77 Sztur, 1996, Predicting the microporosity of aluminium alloys, Hommes et Fonderie (France), 266, 27 J.A. Spittle, S.G.R. Brown, J.G. Sullivan, Application of criteria functions to the prediction of microporosity levels in castings, in: Fourth Decennial International Conference on Solidification Processing, 1997, pp. 251–255 F. Chiesa, P. Desilets, F. Morin, Using the reduced pressure test and solidification modeling to predict the porosity distribution in aluminum A356 castings, in: Fifth International AFS Conference on Molten Aluminum Processing, 1998, pp. 305–320 Chiesa, 1996, Influence of some processes and metallurgical factors on production of cast aluminum wheels, AFS Trans., 103, 547 Darcy, 1856 Kubo, 1985, Mathematical modeling of porosity formation in solidification, Metall. Trans., 16B, 359, 10.1007/BF02679728 Kubo, 1986, Porosity formation in solidifying castings, AFS Trans., 94, 753 Poirier, 1987, A thermodynamic prediction for microporosity formation in aluminum-rich Al–Cu alloys, Metall. Trans. A, 18, 1979, 10.1007/BF02647028 Shivkumar, 1990, Modeling of microstructure evolution and microporosity formation in cast aluminum alloys, AFS Trans., 98, 897 Zou, 1990, Microporosity formation in Aa356.2 castings, Production Electrolysis Light Met., 87 J. Ampuero, C. Charbon, F.A. Hoadley, M. Rappaz, Modelling of microporosity evolution during the solidification of metallic alloys, in: Materials Processing in the Computer Age, 17–21 February 1991, pp. 377–388 J.D. Zhu, I. Ohnaka, Computer simulation of interdendritic porosity in aluminum alloy ingots and casting, in: Modeling of Casting, Welding and Advanced Solidification Processes, vol. V, 1991, pp. 435–442 Carpentier, 1993, Modelling of microporosity formation in aluminium alloys casting, Mater. Sci. Eng. A, 173, 155 Kuznetsov, 1995, Development and investigation of 3-phase model of the mushy zone for analysis of porosity formation in solidifying castings, Int. J. Heat Mass Transfer, 38, 2557, 10.1016/0017-9310(95)00012-X Rousset, 1995, Modeling of inverse segregation and porosity formation in directionally solidified aluminum alloys, Metall. Trans. A, 26, 2349, 10.1007/BF02671249 C. Pequet, M. Rappaz, Modeling of porosity formation during the solidification of aluminium alloys using a mushy zone refinement method, in: Modeling of Casting, Welding and Advanced Solidification Processes, vol. IX, 2000, pp. 71–79 Lee, 1997, Hydrogen porosity in directional solidified aluminium–copper alloys: in situ observation, Acta Mater., 45, 4155, 10.1016/S1359-6454(97)00081-5 Atwood, 2000, Diffusion-controlled growth of hydrogen pores in aluminium–silicon castings: in situ observation and modelling, Acta Mater., 48, 405, 10.1016/S1359-6454(99)00363-8 Wilt, 1986, Nucleation rates and bubble stability in water–carbondioxide solutions, J. Colloid Interface Sci., 112, 530, 10.1016/0021-9797(86)90122-0 A.L. Maples, D.R. Poirier, Analysis and calculations of macro-segregation in a casting ingot, Report No. 84HV001, General Electric Co., Huntsville, AL, 1984, pp. 163–172 McCartney, 1981, Measurements of cell and primary dendrite arm spacing in directionally solidified aluminium alloys, Acta Metall., 29, 1851, 10.1016/0001-6160(81)90111-5 Talbot, 1975, Effects of hydrogen in aluminium, magnesium, copper, and their alloys, Int. Metall. Rev., 20, 166, 10.1179/095066075790136871 Flood, 1981, Modification of Al–Si eutectic alloys with Na, Met. Sci., 15, 287, 10.1179/030634581790426813 J. Ampuero, A.F.A. Hoadley, M. Rappaz, Numerical and experimental study of microporosity evolution during the solidification of metallic alloys, in: Modelling of Casting, Welding and Advanced Solidification Processes, vol. V, 1991, pp. 449–454 Fang, 1989, Prediction of pore size due to rejection of hydrogen during solidification of aluminum alloys, Light Met., 927 P.D. Lee, J.D. Hunt, A model of the interaction of porosity and the developing microstructure, in: Conference on Modeling of Casting, Welding and Advanced Solidification Processes, 1995, pp. 585–592 R.C. Atwood, P.D. Lee, A combined cellular automaton and diffusion model for the prediction of porosity formation during solidification, in: Modeling of Casting, Welding and Advanced Solidification Processes, vol. IX, 2000, pp. 2–9 Fredriksson, 1976, On the mechanism of pore formation in metals, Metall. Trans., 7B, 599, 10.1007/BF02698593 P.D. Lee, D. See, R.C. Atwood, Porosity formation during solidification – a comparison of micro modelling approaches, in: Cutting Edge of Computer Simulation of Solidification and Casting, 1999, pp. 97–111 Thevoz, 1989, Modeling of equiaxed microstructure formation in casting, Metall. Trans., 20A, 311, 10.1007/BF02670257 Gandin, 1993, Probabilistic modeling of grain information in solidification processes, vol. VI Charbon, 1993, 3D Probabilistic modelling of equiaxed eutectic solidification, modelling and simulation, Mater. Sci. Eng., 1, 455 Lee, 1997, Measuring the nucleation of hydrogen porosity during the solidification of aluminium–copper alloys, Scr. Mater., 36, 399, 10.1016/S1359-6462(96)00411-3 Atwood, 1999, Equations for nucleation of hydrogen gas pores during solidification of aluminium seven weight percent silicon alloy, Scr. Mater., 41, 1255, 10.1016/S1359-6462(99)00297-3 Hunt, 1996, Numerical modeling of cellular/dendritic array growth: spacing and structure predictions, Metall. Trans. A, 27, 611, 10.1007/BF02648950 Huang, 1998, Simulation of microporosity formation in modified and unmodified A356 alloy castings, Metall. Trans. B, 29, 1249, 10.1007/s11663-998-0048-4 Rappaz, 1993, Probabilistic modelling of microstructure formation in solidification processes, Acta Metall., 41, 345, 10.1016/0956-7151(93)90065-Z Gandin, 1994, A couppled finite element–cellular automaton model for the prediction of dendritic grain structures in solidification processes, Acta Metall., 42, 2233, 10.1016/0956-7151(94)90302-6 Conley, 2000, Modeling the effects of cooling rate, hydrogen content, grain refiner and modifier on microporosity formation in Al A356 alloys, Mater. Sci. Eng. A, 285, 49, 10.1016/S0921-5093(00)00665-1 Brown, 1998, Simulation of diffusional composite growth using the cellular automaton finite difference (Cafd) method, J. Mater. Sci., 33, 4769, 10.1023/A:1004405607979 Nastac, 1999, Numerical modeling of solidification morphologies and segregation patterns in cast dendritic alloys, Acta Mater., 47, 4253, 10.1016/S1359-6454(99)00325-0