Modeling buckling distortion of DP600 overlap joints due to gas metal arc welding and the influence of the mesh density

Taljat, 1998, Mater. Sci. Eng., 246A, 45, 10.1016/S0921-5093(97)00729-6 Murthy, 1996, Compos. Struct., 60, 131, 10.1016/0045-7949(95)00359-2 Rammerstorfer, 1981, Comp. Struct., 13, 771, 10.1016/0045-7949(81)90040-7 Hughes, 1987 Pilipenko, Computer Simulation of Residual Stress and Distortion of Thick Plates in Multi-electrode Submerged Arc Welding – Their Mitigation Techniques, PhD Thesis, NTNU Trondheim, 2001. E. van der Aa, Local Cooling During Welding: Prediction and Control of Residual Stresses and Buckling Distortion, PhD Thesis, TU Delft, 2007. Camilleri, 2005, Mater. Sci. Eng., 13, 1365 Friedman, 1975, Press. Ves. Technol., 97, 206, 10.1115/1.3454296 Cañas, 1996, Compos. Struct., 58, 55, 10.1016/0045-7949(95)00112-T Belytschko, 2001 Mase, 1969 R. Pietzsch, Simulation und Minimierung des Verzuges von Stahlprofilen beider Abkühlung, PhD Thesis, University of Magdeburg, 2000. Hughes, 1987 Simo, 1998 Hoger, 1984, Quarterly Appl. Math., 113, 10.1090/qam/736511 Higham, 2000, Matrix Anal. Appl., 22, 1126, 10.1137/S0895479800368688 G. Weber, Computational Procedures for a New Class of Finite Deformation Elastic-Plastic Constitutive Equations, PhD Thesis, Massachusetts Institute of Technology, 1988. Simo, 1990, Num. Meth. Eng., 29, 1595, 10.1002/nme.1620290802 Flanagan, 1981, Num. Meth. Eng., 17, 679, 10.1002/nme.1620170504 F Koschnick, Geometrische Locking-Effekte bei Finiten Elementen und ein allgemeines Konzept zu ihrer Vermeidung, PhD Thesis, TU München, 2004. Taylor, 1976, Num. Meth. Eng., 10, 1211, 10.1002/nme.1620100602 ABAQUS User‘s Manual, Version 6.8, Hibbit, Karlsson and Sorensen Inc., USA. Chaboche, 1989, Plast., 5, 247, 10.1016/0749-6419(89)90015-6 Bhattacharyya, 2006, Metall. Mater. Trans., 37A, 1137, 10.1007/s11661-006-1092-9 Hahn, 1962, Acta Metall., 10, 727, 10.1016/0001-6160(62)90041-X McDowell, 1992, Plast., 8, 695, 10.1016/0749-6419(92)90024-7 Seifert, 2007, Comput. Meth. Appl. Mec., 196, 2269, 10.1016/j.cma.2006.12.002 Dennis, 1987 Schenk, 2009, Sci. Technol. Weld. Joi., 14, 669, 10.1179/136217109X412418 G. Kloosterman, Contact Methods in Finite Element Methods, PhD Thesis, TU Twente, 2002. Y. Kang, Y. Shun, X. Wang, A study on friction characteristics of coated and non-coated steel sheets in sheet forming, in: Proceedings of the NUMISHEET’96, 1996, pp. 61–64. Goldak, 1984, Metall. Mater. Trans., 15B, 299, 10.1007/BF02667333 L. Fuglsang-Andersen, Residual Stresses and Deformations in Steel Structures, PhD Thesis, Denmark University of Technology, 2000. Lindgren, 2001, Themal Stresses, 24, 141, 10.1080/01495730150500442 Timoshenko, 1961 Knothe, 2008 Ma, 1995, JWRI, 24, 115 Press, 2002 S. Ohnimus, Theorie und Numerik dimensions- und modelladaptiver Finite-Elemente-Methoden von Flächentragwerken, PhD Thesis, University of Hannover, 1996. Zienkiewicz, 1987, Num. Meth. Eng., 24, 337, 10.1002/nme.1620240206