Modeling and simulation in tribology across scales: An overview
Tóm tắt
Từ khóa
Tài liệu tham khảo
Jost, 1966
Tzanakis, 2012, Future perspectives on sustainable tribology, Renew Sustain Energy Rev, 16, 4126, 10.1016/j.rser.2012.02.064
Donnet, 2004, Solid lubricant coatings: recent developments and future trends, Tribol Lett, 17, 389, 10.1023/B:TRIL.0000044487.32514.1d
Neville, 2007, Compatibility between tribological surfaces and lubricant additives—how friction and wear reduction can be controlled by surface/lube synergies, Tribol Int, 40, 1680, 10.1016/j.triboint.2007.01.019
Holmberg, 2012, Global energy consumption due to friction in passenger cars, Tribol Int, 47, 221, 10.1016/j.triboint.2011.11.022
Persson, 2001, Theory of rubber friction and contact mechanics, J Chem Phys, 115, 3840
Carpick, 1997, Scratching the surface: fundamental investigations of tribology with atomic force microscopy, Chem Rev, 97, 1163, 10.1021/cr960068q
Persson, 2004, On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion, J Phys Condens Matter, 17, R1, 10.1088/0953-8984/17/1/R01
Morales-Espejel, 2014, Surface roughness effects in elastohydrodynamic lubrication: a review with contributions, Proc Inst Mech Eng Part J, 228, 1217, 10.1177/1350650113513572
Bhushan, 2007, Nanotribology and nanomechanics of MEMS/NEMS and BioMEMS/BioNEMS materials and devices, Microelectron Eng, 84, 387, 10.1016/j.mee.2006.10.059
Canchi, 2011, Thermal fly-height control slider instability and dynamics at touchdown: explanations using nonlinear systems theory, J Tribol, 133
Vakis, 2012, Three-DOF dynamic model with lubricant contact for thermal fly-height control nanotechnology, J Phys D, 45, 10.1088/0022-3727/45/13/135402
Cann, 2015, Welcome to the first issue of Biotribology, Biotribology, 1–2, 1, 10.1016/j.biotri.2015.06.001
van Kuilenburg, 2015, A review of fingerpad contact mechanics and friction and how this affects tactile perception, Proc Inst Mech Eng Part J, 229, 243, 10.1177/1350650113504908
Ma, 2015, Nanoporous substrate-infiltrated hydrogels: a bioinspired regenerable surface for high load bearing and tunable friction, Adv Funct Mater, 25, 7366, 10.1002/adfm.201503681
Rashid, 2014, The effect of surface roughness on ceramics used in dentistry: a review of literature, Eur J Dent, 8, 571, 10.4103/1305-7456.143646
Martin, 1993, Superlubricity of molybdenum disulphide, Phys Rev B, 48, 10583, 10.1103/PhysRevB.48.10583
Hirano, 1993, Superlubricity and frictional anisotropy, Wear, 168, 121, 10.1016/0043-1648(93)90207-3
Urbakh, 2013, Friction: towards macroscale superlubricity, Nat Nanotechnol, 8, 893, 10.1038/nnano.2013.244
Berman, 2015, Friction. Macroscale superlubricity enabled by graphene nanoscroll formation, Science, 348, 1118, 10.1126/science.1262024
Carbone, 2011, Origin of the superior adhesive performance of mushroom-shaped microstructured surfaces, Soft Matter, 7, 5545, 10.1039/c0sm01482f
Afferrante, 2013, Adhesion of elastic thin films: double peeling of tapes versus axisymmetric peeling of membranes, Tribol Lett, 52, 439, 10.1007/s11249-013-0227-6
Kim, 2008, The adhesion model considering capillarity for gecko attachment system, J R Soc Interface, 5, 319, 10.1098/rsif.2007.1078
Persson, 2003, The effect of surface roughness on the adhesion of elastic plates with application to biological systems, J Chem Phys, 119, 11437
Papangelo, 2017, A Maugis-Dugdale cohesive solution for adhesion of a surface with a dimple, J R Soc Interface, 14, 10.1098/rsif.2016.0996
Zhou, 2013, Recent advances in gecko adhesion and friction mechanisms and development of gecko-inspired dry adhesive surfaces, Friction, 1, 114, 10.1007/s40544-013-0011-5
Huber, 2005, Evidence for capillarity contributions to gecko adhesion from single spatula nanomechanical measurements, Proc Natl Acad Sci U S A, 102, 16293, 10.1073/pnas.0506328102
Ma, 2017, Nanohydrogel brushes for switchable underwater adhesion, J Phys Chem C, 121, 8452, 10.1021/acs.jpcc.7b01305
Kappl, 2016, Nanoscale friction and adhesion of tree frog toe pads, Bioinspiration Biomimetics, 11, 10.1088/1748-3190/11/3/035003
Gorb, 2007, Insects did it first: a micropatterned adhesive tape for robotic applications, Bioinspiration Biomimetics, 2, S117, 10.1088/1748-3182/2/4/S01
Autumn, 2002, Evidence for van der Waals adhesion in gecko setae, Proc Natl Acad Sci U S A, 99, 12252, 10.1073/pnas.192252799
Cho, 2009, Review of manufacturing processes for soft biomimetic robots, Int J Precis Eng Manuf, 10, 171, 10.1007/s12541-009-0064-6
Scheibert, 2009, The role of fingerprints in the coding of tactile information probed with a biomimetic sensor, Science, 323, 1503, 10.1126/science.1166467
Hayward, 2011, Is there a ‘plenhaptic’ function?, Philos Trans R Soc Lond B Biol Sci, 366, 3115, 10.1098/rstb.2011.0150
Prescott, 2011, Active touch sensing, Philos Trans R Soc Lond B Biol Sci, 366, 2989, 10.1098/rstb.2011.0167
Klöcker, 2013, Physical factors influencing pleasant touch during tactile exploration, Plos one, 8, 10.1371/journal.pone.0079085
Johnson, 2013
Johnson, 1985
Popov, 2010
Persson, 2013
Tichy, 2000, Review of solid mechanics in tribology, Int J Solid Struct, 37, 391, 10.1016/S0020-7683(99)00101-8
Maugis, 2013
Hertz, 1882
Johnson, 1971, Surface energy and the contact of elastic solids, Proc R Soc A, 324, 301, 10.1098/rspa.1971.0141
Derjaguin, 1975, Effect of contact deformations on the adhesion of particles, J Colloid Interface Sci, 53, 314, 10.1016/0021-9797(75)90018-1
Constantinescu, 2013, Symbolic and numerical solution of the axisymmetric indentation problem for a multilayered elastic coating, Int J Solid Struct, 50, 2798, 10.1016/j.ijsolstr.2013.04.017
Komvopoulos, 2007, Stress analysis of a layered elastic solid in contact with a rough surface exhibiting fractal behavior, Int J Solid Struct, 44, 2109, 10.1016/j.ijsolstr.2006.06.043
Chen, 2010, Modeling elasto-plastic indentation on layered materials using the equivalent inclusion method, Int J Solid Struct, 47, 2841, 10.1016/j.ijsolstr.2010.06.011
Bagault, 2013, Contact analyses for anisotropic half-space coated with an anisotropic layer: effect of the anisotropy on the pressure distribution and contact area, Int J Solid Struct, 50, 743, 10.1016/j.ijsolstr.2012.11.002
Chidlow, 2014, Sliding contact problems involving inhomogeneous materials comprising a coating-transition layer-substrate and a rigid punch, Int J Solid Struct, 51, 1931, 10.1016/j.ijsolstr.2014.02.003
Putignano, 2015, Mechanics of rough contacts in elastic and viscoelastic thin layers, Int J Solid Struct, 69–70, 507, 10.1016/j.ijsolstr.2015.04.034
Stan, 2016, Adhesive contact between a rigid spherical indenter and an elastic multi-layer coated substrate, Int J Solid Struct, 87, 1, 10.1016/j.ijsolstr.2016.02.043
Zhang, 2017, Elasto-plastic contact of materials containing double-layered inhomogeneities, Int J Solid Struct, 126–127, 208
Reina, 2011, A quadratic programming formulation for the solution of layered elastic contact problems: example applications and experimental validation, Eur J Mech Solid, 30, 236, 10.1016/j.euromechsol.2010.12.003
Ciavarella, 1998, The generalized Cattaneo partial slip plane contact problem I-Theory, Int J Solid Struct, 35, 2349, 10.1016/S0020-7683(97)00154-6
Dini, 2003, A method based on asymptotics for the refined solution of almost complete partial slip contact problems, Eur J Mech Solid, 22, 851, 10.1016/j.euromechsol.2003.09.001
Sackfield, 2007, Side-contact of sharp indenters, including the effects of friction, Int J Mech Sci, 49, 567, 10.1016/j.ijmecsci.2006.09.023
Flicek, 2015, Sharp edged contacts subject to fretting: a description of corner behaviour, Int J Fatigue, 71, 26, 10.1016/j.ijfatigue.2014.02.015
Sundaram, 2010, Mechanics of advancing pin-loaded contacts with friction, J Mech Phys Solids, 58, 1819, 10.1016/j.jmps.2010.08.004
Fleury, 2017, Incomplete contacts in partial slip subject to varying normal and shear loading, and their representation by asymptotes, J Mech Phys Solids, 99, 178, 10.1016/j.jmps.2016.11.016
Hills, 2006, A new method for the quantification of nucleation of fretting fatigue cracks using asymptotic contact solutions, Tribol Int, 39, 1114, 10.1016/j.triboint.2006.02.041
Mugadu, 2004, The application of asymptotic solutions to characterising the process zone in almost complete frictional contacts, Int J Solid Struct, 41, 385, 10.1016/j.ijsolstr.2003.09.038
Dini, 2008, The application of asymptotic solutions to contact problems characterised by logarithmic singularities, Eur J Mech Solid, 27, 847, 10.1016/j.euromechsol.2007.12.003
Ballard, 2016, Steady sliding frictional contact problem for a 2d elastic half-space with a discontinuous friction coefficient and related stress singularities, J Mech Phys Solids, 97, 225, 10.1016/j.jmps.2016.03.021
Oliver, 1992, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J Mater Res, 7, 1564, 10.1557/JMR.1992.1564
Oliver, 2004, Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology, J Mater Res, 19, 3, 10.1557/jmr.2004.19.1.3
Butt, 2005, Force measurements with the atomic force microscope: technique, interpretation and applications, Surf Sci Rep, 59, 1, 10.1016/j.surfrep.2005.08.003
Ramesh, 2015, Recent progress in understanding the properties of elastic contacts, Proc Inst Mech Eng Part C, 229, 2117, 10.1177/0954406214556667
Kartal, 2011, Partial slip problem for two semi-infinite strips in contact, Int J Eng Sci, 49, 203, 10.1016/j.ijengsci.2010.11.007
Flicek, 2015, Determination of the shakedown limit for large, discrete frictional systems, Eur J Mech Solid, 49, 242, 10.1016/j.euromechsol.2014.08.001
Eriten, 2011, Physics-based modeling for fretting behavior of nominally flat rough surfaces, Int J Solid Struct, 48, 1436, 10.1016/j.ijsolstr.2011.01.028
Papangelo, 2015, Fracture mechanics implications for apparent static friction coefficient in contact problems involving slip-weakening laws, Proc R Soc A, 471, 10.1098/rspa.2015.0271
Adams, 1995, Self-excited oscillations of two elastic half-spaces sliding with a constant coefficient of friction, J appl Mech, 62, 867, 10.1115/1.2896013
Adams, 2005, Improvements to a scale-dependent model for contact and friction, J Phys D, 38, 1402, 10.1088/0022-3727/38/9/012
Stronge, 2004
Thornton, 2017, On elastic-plastic normal contact force models, with and without adhesion, Powder Technol, 315, 339, 10.1016/j.powtec.2017.04.008
Yildirim, 2017, Rebound mechanics of micrometre-scale, spherical particles in high-velocity impacts, Proc R Soc A, 473, 10.1098/rspa.2016.0936
Ye, 2017, A size-dependent viscoelastic normal contact model for particle collision, Int J Impact Eng, 106, 120, 10.1016/j.ijimpeng.2017.03.020
Yu, 2017, An impulse based model for spherical particle collisions with sliding and rolling, Powder Technol, 319, 102, 10.1016/j.powtec.2017.06.049
Banerjee, 2017, Historical origin and recent development on normal directional impact models for rigid body contact simulation: a critical review, Arch Comput Meth Eng, 24, 397, 10.1007/s11831-016-9164-5
Yi, 2000, Eigenvalue solution of thermoelastic instability problems using Fourier reduction, Proc Roy Soc Lond Math Phys Eng Sci, 456, 2799, 10.1098/rspa.2000.0641
Afferrante, 2003, Transient analysis of frictionally excited thermoelastic instability in multi-disk clutches and brakes, Wear, 254, 136, 10.1016/S0043-1648(02)00306-X
Nowell, 2006, Recent developments in the understanding of fretting fatigue, Eng Fract Mech, 73, 207, 10.1016/j.engfracmech.2005.01.013
Hills, 2014, Mechanics of fretting fatigue-Oxford's contribution, Tribol Int, 76, 1, 10.1016/j.triboint.2013.09.015
Araujo, 2002, The effect of rapidly varying contact stress fields on fretting fatigue, Int J Fatigue, 24, 763, 10.1016/S0142-1123(01)00191-8
Kinyon, 2003
Ciavarella, 2003, ‘crack-like’ notch analogue for a safe-life fretting fatigue design methodology, Fatig Fract Eng Mater Struct, 26, 1159, 10.1046/j.1460-2695.2003.00721.x
Hoeppner, 2006, Fretting fatigue case studies of engineering components, Tribol Int, 39, 1271, 10.1016/j.triboint.2006.02.051
Bower, 1988, The influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks, J Tribol, 110, 704
Afferrante, 2004, A re-examination of rolling contact fatigue experiments by Clayton and Su with suggestions for surface durability calculations, Wear, 256, 329, 10.1016/S0043-1648(03)00408-3
Ponter, 2004, A note on Merwin's measurements of forward flow in rolling contact, Wear, 256, 321, 10.1016/S0043-1648(03)00407-1
Franklin, 2001, Computer simulation of wear and rolling contact fatigue, Wear, 251, 949, 10.1016/S0043-1648(01)00732-3
Kalker, 2013
Sadeghi, 2009, A review of rolling contact fatigue, J Tribol, 131
Yang, 2017, Parametric study on stressed volume and its application to the quantification of rolling contact fatigue performance of heterogeneous material, Tribol Int, 107, 221, 10.1016/j.triboint.2016.11.034
Solano-Alvarez, 2017, Synchrotron and neural network analysis of the influence of composition and heat treatment on the rolling contact fatigue of hypereutectoid pearlitic steels, Mater Sci Eng, 707, 259, 10.1016/j.msea.2017.09.045
Jiang, 2002, Three-dimensional elastic-plastic stress analysis of rolling contact, J Tribol, 124, 699
Goryacheva, 2013
Torskaya, 2012, Modeling of frictional interaction of a rough indenter and a two-layer elastic half-space, Phys Mesomech, 15, 245, 10.1134/S1029959912020130
Goryacheva, 2016, Adhesion effect in sliding of a periodic surface and an individual indenter upon a viscoelastic base, J Strain Anal Eng Des, 51, 286, 10.1177/0309324715614194
Goryacheva, 2012, Modelling of a punch with a regular base relief sliding along a viscoelastic foundation with a liquid lubricant, J Appl Math Mech, 76, 582, 10.1016/j.jappmathmech.2012.11.007
Majumdar, 1991, Fractal model of elastic-plastic contact between rough surfaces, ASME J Tribol, 113, 1, 10.1115/1.2920588
Archard, 1957, Elastic deformation and the laws of friction, Proc Roy Soc Lond Math Phys Eng Sci, 243, 190, 10.1098/rspa.1957.0214
Ciavarella, 2000, Linear elastic contact of the Weierstrass profile, Proc Roy Soc Lond Math Phys Eng Sci, 456, 387, 10.1098/rspa.2000.0522
Müser, 2017, Meeting the contact-mechanics challenge, Tribol Lett, 65, 118, 10.1007/s11249-017-0900-2
Nayak, 1971, Random process model of rough surfaces, J Lubr Technol, 93, 398
Longuet-Higgins, 1957, The statistical analysis of a random, moving surface, Philos Trans R Soc Lond A Math Phys Eng Sci, 249, 321, 10.1098/rsta.1957.0002
Longuet-Higgins, 1957, Statistical properties of an isotropic random surface, Philos Trans R Soc Lond A Math Phys Eng Sci, 250, 157, 10.1098/rsta.1957.0018
Greenwood, 2006, A simplified elliptic model of rough surface contact, Wear, 261, 191, 10.1016/j.wear.2005.09.031
Paggi, 2010, The coefficient of proportionality k between real contact area and load, with new asperity models, Wear, 268, 1020, 10.1016/j.wear.2009.12.038
Carbone, 2008, Asperity contact theories: do they predict linearity between contact area and load?, J Mech Phys Solids, 56, 2555, 10.1016/j.jmps.2008.03.011
Yastrebov, 2017, The role of the roughness spectral breadth in elastic contact of rough surfaces, J Mech Phys Solids, 107, 469, 10.1016/j.jmps.2017.07.016
Ciavarella, 2008, Inclusion of ‘interaction’ in the Greenwood and Williamson contact theory, Wear, 265, 729, 10.1016/j.wear.2008.01.019
Chandrasekar, 2013, An improved model of asperity interaction in normal contact of rough surfaces, J Appl Mech, 80, 10.1115/1.4007142
Vakis, 2014, Asperity interaction and substrate deformation in statistical summation models of contact between rough surfaces, J Appl Mech, 81, 41012, 10.1115/1.4025413
Ciavarella, 2006, A “re-vitalized” Greenwood and Williamson model of elastic contact between fractal surfaces, J Mech Phys Solids, 54, 2569, 10.1016/j.jmps.2006.05.006
Putignano, 2012, The influence of the statistical properties of self-affine surfaces in elastic contacts: a numerical investigation, J Mech Phys Solids, 60, 973, 10.1016/j.jmps.2012.01.006
Persson, 2002, Elastic contact between randomly rough surfaces: comparison of theory with numerical results, Phys Rev B, 65, 10.1103/PhysRevB.65.184106
Manners, 2006, Some observations on Persson's diffusion theory of elastic contact, Wear, 261, 600, 10.1016/j.wear.2006.01.007
Hyun, 2004, Finite-element analysis of contact between elastic self-affine surfaces, Phys Rev E, 70, 10.1103/PhysRevE.70.026117
Zavarise, 2004, On the reliability of microscopical contact models, Wear, 257, 229, 10.1016/j.wear.2003.12.010
Hyun, 2007, Elastic contact between rough surfaces: effect of roughness at large and small wavelengths, Tribol Int, 40, 1413, 10.1016/j.triboint.2007.02.003
Campaná, 2007, Contact mechanics of real vs. randomly rough surfaces: a Green's function molecular dynamics study, EPL (Europhys Lett), 77, 38005, 10.1209/0295-5075/77/38005
Campañá, 2008, Elastic contact between self-affine surfaces: comparison of numerical stress and contact correlation functions with analytic predictions, J Phys Cond Matter, 20
Almqvist, 2011, Interfacial separation between elastic solids with randomly rough surfaces: comparison between theory and numerical techniques, J Mech Phys Solids, 59, 2355, 10.1016/j.jmps.2011.08.004
Putignano, 2012, A new efficient numerical method for contact mechanics of rough surfaces, Int J Solid Struct, 49, 338, 10.1016/j.ijsolstr.2011.10.009
Pastewka, 2013, Finite-size scaling in the interfacial stiffness of rough elastic contacts, Phys Rev E, 87, 10.1103/PhysRevE.87.062809
Dapp, 2014, Systematic analysis of Persson's contact mechanics theory of randomly rough elastic surfaces, J Phys Condens Matter, 26, 355002, 10.1088/0953-8984/26/35/355002
Prodanov, 2014, On the contact area and mean gap of rough, elastic contacts: dimensional analysis, numerical corrections, and reference data, Tribol Lett, 53, 433, 10.1007/s11249-013-0282-z
Yastrebov, 2015, From infinitesimal to full contact between rough surfaces: evolution of the contact area, Int J Solid Struct, 52, 83, 10.1016/j.ijsolstr.2014.09.019
Solhjoo, 2016, Continuum mechanics at the atomic scale: insights into non-adhesive contacts using molecular dynamics simulations, J Appl Phys, 120, 10.1063/1.4967795
Papangelo, 2017, Load-separation curves for the contact of self-affine rough surfaces, Sci Rep, 7, 6900, 10.1038/s41598-017-07234-4
Yang, 2008, Contact mechanics: contact area and interfacial separation from small contact to full contact, J Phys Condens Matter, 20, 10.1088/0953-8984/20/21/215214
Zienkiewicz, 2000
Banerjee, 1981
Hrennikoff, 1941, Solution of problems of elasticity by the framework method, J Appl Mech, 8, 169, 10.1115/1.4009129
Courant, 1943, Variational methods for the solution of problems of equilibrium and vibrations, Bull Am Math Soc, 49, 1, 10.1090/S0002-9904-1943-07818-4
Johnson, 1985, The contact of elastic regular wavy surfaces, Int J Mech Sci, 27, 383, 10.1016/0020-7403(85)90029-3
Stanley, 1997, An FFT-based method for rough surface contact, J Tribol, 119, 481
Laursen, 2002
Wriggers, 2006
Yastrebov, 2013
Bemporad, 2015, Optimization algorithms for the solution of the frictionless normal contact between rough surfaces, Int J Solid Struct, 69–70, 94, 10.1016/j.ijsolstr.2015.06.005
Rodríguez-Tembleque, 2010, 3D FEM–BEM rolling contact formulation for unstructured meshes, Int J Solid Struct, 47, 330, 10.1016/j.ijsolstr.2009.10.008
Zografos, 2009, Fretting fatigue and wear in bolted connections: a multi-level formulation for the computation of local contact stresses, Tribol Int, 42, 1663, 10.1016/j.triboint.2009.03.007
Spence, 1975, The Hertz contact problem with finite friction, J Elasticity, 5, 297, 10.1007/BF00126993
Jacq, 2002, Development of a three-dimensional semi-analytical elastic-plastic contact code, J Tribol, 124, 653
Sahlin, 2010, A mixed lubrication model incorporating measured surface topography. Part 1: theory of flow factors, Proc Inst Mech Eng Part J, 224, 335, 10.1243/13506501JET658
Sahlin, 2010, A mixed lubrication model incorporating measured surface topography. Part 2: roughness treatment, model validation, and simulation, Proc Inst Mech Eng Part J, 224, 353, 10.1243/13506501JET659
Carbone, 2013, A novel methodology to predict sliding and rolling friction of viscoelastic materials: theory and experiments, J Mech Phys Solids, 61, 1822, 10.1016/j.jmps.2013.03.005
Bugnicourt, 2017, Transient frictionless contact of a rough rigid surface on a viscoelastic half-space, Tribol Int, 113, 279, 10.1016/j.triboint.2017.01.032
Yastrebov, 2011, Rough surface contact analysis by means of the Finite Element Method and of a new reduced model, CR Mécanique, 339, 473, 10.1016/j.crme.2011.05.006
Scaraggi, 2016, The influence of geometrical and rheological non-linearity on the calculation of rubber friction, Tribol Int, 101, 402, 10.1016/j.triboint.2016.04.027
Leroux, 2010, Contact analysis in presence of spherical inhomogeneities within a half-space, Int J Solid Struct, 47, 3034, 10.1016/j.ijsolstr.2010.07.006
Paggi, 2011, Contact mechanics of microscopically rough surfaces with graded elasticity, Eur J Mech Solid, 30, 696, 10.1016/j.euromechsol.2011.04.007
Dick, 2006, Fretting modelling with a crystal plasticity model of Ti6Al4V, Comput Mater Sci, 38, 113, 10.1016/j.commatsci.2006.01.015
Casals, 2009, Finite element crystal plasticity analysis of spherical indentation in bulk single crystals and coatings, Comput Mater Sci, 45, 774, 10.1016/j.commatsci.2008.09.030
Yang, 2009, A mortar-finite element approach to lubricated contact problems, Comput Methods Appl Mech Eng, 198, 3656, 10.1016/j.cma.2009.07.008
Nanbu, 2008, Micro-textures in concentrated conformal-contact lubrication: effects of texture bottom shape and surface relative motion, Tribol Lett, 29, 241, 10.1007/s11249-008-9302-9
Stupkiewicz, 2016, Finite deformation effects in soft elastohydrodynamic lubrication problems, Tribol Int, 93, 511, 10.1016/j.triboint.2015.03.016
Rodríguez-Tembleque, 2016, Quasistatic electro-elastic contact modeling using the boundary element method, Key Eng Mater, 681, 185, 10.4028/www.scientific.net/KEM.681.185
Yastrebov, 2015, Three-level multi-scale modeling of electrical contacts sensitivity study and experimental validation, 414
Zhu, 2001, A computer program package for the prediction of EHL and mixed lubrication characteristics, friction, subsurface stresses and flash temperatures based on measured 3-D surface roughness, Tribol Trans, 44, 383, 10.1080/10402000108982471
Geubelle, 1995, A spectral method for three-dimensional elastodynamic fracture problems, J Mech Phys Solids, 43, 1791, 10.1016/0022-5096(95)00043-I
Ranjith, 2015, Spectral formulation of the elastodynamic boundary integral equations for bi-material interfaces, Int J Solid Struct, 59, 29, 10.1016/j.ijsolstr.2014.12.031
Kammer, 2012, On the propagation of slip fronts at frictional interfaces, Tribol Lett, 48, 27, 10.1007/s11249-012-9920-0
Yastrebov, 2016, Sliding without slipping under Coulomb friction: opening waves and inversion of frictional force, Tribol Lett, 62, 1, 10.1007/s11249-016-0650-6
Hill, 1966, Generalized constitutive relations for incremental deformation of metal crystals by multislip, J Mech Phys Solids, 14, 95, 10.1016/0022-5096(66)90040-8
Rice, 1971, Inelastic constitutive relations for solids: an internal-variable theory and its application to metal plasticity, J Mech Phys Solids, 19, 433, 10.1016/0022-5096(71)90010-X
Hill, 1972, Constitutive analysis of elastic-plastic crystals at arbitrary strain, J Mech Phys Solids, 20, 401, 10.1016/0022-5096(72)90017-8
Asaro, 1983, Micromechanics of crystals and polycrystals, Adv Appl Mech, 23, 1, 10.1016/S0065-2156(08)70242-4
Barbe, 2001, Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: FE model, Int J Plast, 17, 513, 10.1016/S0749-6419(00)00061-9
Barbe, 2001, Intergranular and intragranular behavior of polycrystalline aggregates. Part 2: Results, Int J Plast, 17, 537, 10.1016/S0749-6419(00)00062-0
Berveiller, 1978, An extension of the self-consistent scheme to plastically-flowing polycrystals, J Mech Phys Solids, 26, 325, 10.1016/0022-5096(78)90003-0
Miehe, 1999, Computational homogenization analysis in finite plasticity simulation of texture development in polycrystalline materials, Comput Methods Appl Mech Eng, 171, 387, 10.1016/S0045-7825(98)00218-7
Roters, 2010, Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications, Acta Mater, 58, 1152, 10.1016/j.actamat.2009.10.058
Lebensohn, 1993, A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys, Acta Metall Mater, 41, 2611, 10.1016/0956-7151(93)90130-K
Kalidindi, 1998, Incorporation of deformation twinning in crystal plasticity models, J Mech Phys Solids, 46, 267, 10.1016/S0022-5096(97)00051-3
Staroselsky, 1998, Inelastic deformation of polycrystalline face centered cubic materials by slip and twinning, J Mech Phys Solids, 46, 671, 10.1016/S0022-5096(97)00071-9
Thamburaja, 2001, Polycrystalline shape-memory materials: effect of crystallographic texture, J Mech Phys Solids, 49, 709, 10.1016/S0022-5096(00)00061-2
Turteltaub, 2005, Transformation-induced plasticity in ferrous alloys, J Mech Phys Solids, 53, 1747, 10.1016/j.jmps.2005.03.004
Ortiz, 1999, Nonconvex energy minimization and dislocation structures in ductile single crystals, J Mech Phys Solids, 47, 397, 10.1016/S0022-5096(97)00096-3
Tóth, 2010, A model of grain fragmentation based on lattice curvature, Acta Mater, 58, 1782, 10.1016/j.actamat.2009.11.020
Petryk, 2013, The energy criterion for deformation banding in ductile single crystals, J Mech Phys Solids, 61, 1854, 10.1016/j.jmps.2013.03.004
Frydrych, 2016, A three-scale crystal plasticity model accounting for grain refinement in fcc metals subjected to severe plastic deformations, Mater Sci Eng, 658, 490, 10.1016/j.msea.2016.01.101
Van der Giessen, 1995, Discrete dislocation plasticity: a simple planar model, Modell Simul Mater Sci Eng, 3, 689, 10.1088/0965-0393/3/5/008
Devincre, 1997, Mesoscopic simulations of dislocations and plasticity, Mater Sci Eng, 234, 8, 10.1016/S0921-5093(97)00146-9
Wang, 2006, A parallel algorithm for 3D dislocation dynamics, J Comput Phys, 219, 608, 10.1016/j.jcp.2006.04.005
Arsenlis, 2007, Enabling strain hardening simulations with dislocation dynamics, Modell Simul Mater Sci Eng, 15, 553, 10.1088/0965-0393/15/6/001
Verdier, 1998, Mesoscopic scale simulation of dislocation dynamics in fcc metals: principles and applications, Modell Simul Mater Sci Eng, 6, 755, 10.1088/0965-0393/6/6/007
Senger, 2008, Discrete dislocation simulations of the plasticity of micro-pillars under uniaxial loading, Scr Mater, 58, 587, 10.1016/j.scriptamat.2007.11.031
Venugopalan, 2017, Green's function molecular dynamics meets discrete dislocation plasticity, Model Simulat Mater Sci Eng, 25, 10.1088/1361-651X/aa7e0e
Gurrutxaga-Lerma, 2013, A dynamic discrete dislocation plasticity method for the simulation of plastic relaxation under shock loading, Proc R Soc A, 469, 10.1098/rspa.2013.0141
Gurrutxaga-Lerma, 2015, Attenuation of the dynamic yield point of shocked aluminum using elastodynamic simulations of dislocation dynamics, Phys Rev Lett, 114, 10.1103/PhysRevLett.114.174301
Wallin, 2008, Multi-scale plasticity modeling: coupled discrete dislocation and continuum crystal plasticity, J Mech Phys Solids, 56, 3167, 10.1016/j.jmps.2008.08.004
Xu, 2016, A method of coupling discrete dislocation plasticity to the crystal plasticity finite element method, Modell Simul Mater Sci Eng, 24, 10.1088/0965-0393/24/4/045007
Tower, 1883, First report on friction experiments, Proc Inst Mech Eng, 34, 632, 10.1243/PIME_PROC_1883_034_028_02
Grubin, 1949, Fundamentals of the hydrodynamic theory of lubrication of heavily loaded cylindrical surfaces, Invest Contact Mach Compon, 2, 115
Reynolds, 1886, On the theory of lubrication and its application to Mr. Beauchamp Tower's experiments, including an experimental determination of the viscosity of olive oil, Proc Roy Soc Lond, 40, 191, 10.1098/rspl.1886.0021
Cameron, 1949, The full journal bearing, Proc Inst Mech Eng, 161, 59, 10.1243/PIME_PROC_1949_161_010_02
Dowson, 1959, A numerical solution to the elasto-hydrodynamic problem, J Mech Eng Sci, 1, 6, 10.1243/JMES_JOUR_1959_001_004_02
Dowson, 1960, The effect of material properties on the lubrication of elastic rollers, J Mech Eng Sci, 2, 188, 10.1243/JMES_JOUR_1960_002_028_02
Dowson, 1962, Elasto-hydrodynamic lubrication: a survey of isothermal solutions, J Mech Eng Sci, 4, 121, 10.1243/JMES_JOUR_1962_004_018_02
Dowson, 1999, Past, present and future studies in elastohydrodynamics, Proc Inst Mech Eng Part J, 213, 317, 10.1243/1350650991542703
Venner, 2000
Hooke, 2009, A review of the paper ‘A numerical solution to the elastohydrodynamic problem’by D. Dowson and GR Higginson, Proc Inst Mech Eng Part C, 223, 49, 10.1243/09544062JMES1032
Hamrock, 2004
Conry, 1987, A Reynolds-Eyring equation for elastohydrodynamic lubrication in line contacts, J Tribol, 109, 648
Gohar, 2001
Giacopini, 2010, A mass-conserving complementarity formulation to study lubricant films in the presence of cavitation, J Tribol, 132
Bertocchi, 2013, Fluid film lubrication in the presence of cavitation: a mass-conserving two-dimensional formulation for compressible, piezoviscous and non-Newtonian fluids, Tribol Int, 67, 61, 10.1016/j.triboint.2013.05.018
Woloszynski, 2015, Efficient solution to the cavitation problem in hydrodynamic lubrication, Tribol Lett, 58, 18, 10.1007/s11249-015-0487-4
Tucker, 1996, On the dynamic thermal state in a hydrodynamic bearing with a whirling journal using CFD techniques, J Tribol, 118, 356
Almqvist, 2002, The Navier–Stokes approach for thermal EHL line contact solutions, Tribol Int, 35, 163, 10.1016/S0301-679X(01)00112-8
Hartinger, 2008, CFD modeling of a thermal and shear-thinning elastohydrodynamic line contact, J Tribol, 130
Bruyere, 2012, Computational fluid dynamics and full elasticity model for sliding line thermal elastohydrodynamic contacts, Tribol Int, 46, 3, 10.1016/j.triboint.2011.04.013
Hajishafiee, 2017, A coupled finite-volume CFD solver for two-dimensional elasto-hydrodynamic lubrication problems with particular application to rolling element bearings, Tribol Int, 109, 258, 10.1016/j.triboint.2016.12.046
Profito, 2015, A general finite volume method for the solution of the Reynolds lubrication equation with a mass-conserving cavitation model, Tribol Lett, 60, 18, 10.1007/s11249-015-0588-0
Profito, 2017, Transient experimental and modelling studies of laser-textured micro-grooved surfaces with a focus on piston-ring cylinder liner contacts, Tribol Int, 113, 125, 10.1016/j.triboint.2016.12.003
Vu-Quoc, 2001, Normal and tangential force–displacement relations for frictional elasto-plastic contact of spheres, Int J Solid Struct, 38, 6455, 10.1016/S0020-7683(01)00065-8
Kruggel-Emden, 2008, A study on tangential force laws applicable to the discrete element method (DEM) for materials with viscoelastic or plastic behavior, Chem Eng Sci, 63, 1523, 10.1016/j.ces.2007.11.025
Thornton, 2011, An investigation of the comparative behaviour of alternative contact force models during elastic collisions, Powder Technol, 210, 189, 10.1016/j.powtec.2011.01.013
Rathbone, 2015, An accurate force–displacement law for the modelling of elastic–plastic contacts in discrete element simulations, Powder Technol, 282, 2, 10.1016/j.powtec.2014.12.055
Moreno-Atanasio, 2007, Computer simulation of the effect of contact stiffness and adhesion on the fluidization behaviour of powders, Chem Eng Sci, 62, 184, 10.1016/j.ces.2006.08.036
Wilson, 2016, A numerical study exploring the effect of particle properties on the fluidization of adhesive particles, AIChE J, 62, 1467, 10.1002/aic.15162
Wensrich, 2012, Rolling friction as a technique for modelling particle shape in DEM, Powder Technol, 217, 409, 10.1016/j.powtec.2011.10.057
van Wachem, 2015, Modelling of gas–solid turbulent channel flow with non-spherical particles with large Stokes numbers, Int J Multiphase Flow, 68, 80, 10.1016/j.ijmultiphaseflow.2014.10.006
Jensen, 1999, DEM simulation of granular media—structure interface: effects of surface roughness and particle shape, Int J Numer Anal Methods Geomech, 23, 531, 10.1002/(SICI)1096-9853(199905)23:6<531::AID-NAG980>3.0.CO;2-V
Wilson, 2017, The influence of surface roughness and adhesion on particle rolling, Powder Technol, 312, 321, 10.1016/j.powtec.2017.01.080
Iordanoff, 2008, A discrete element model to investigate sub-surface damage due to surface polishing, Tribol Int, 41, 957, 10.1016/j.triboint.2008.02.018
Richard, 2008, Thermal study of the dry sliding contact with third body presence, J Tribol, 130
Alder, 1959, Studies in molecular dynamics. I. General method, J Chem Phys, 31, 459
Komanduri, 2000, MD simulation of indentation and scratching of single crystal aluminum, Wear, 240, 113, 10.1016/S0043-1648(00)00358-6
Brukman, 2008, Temperature dependence of single-asperity diamond-diamond friction elucidated using AFM and MD simulations, J Phys Chem C, 112, 9358, 10.1021/jp711959e
Onodera, 2010, A computational chemistry study on friction of h-MoS2. Part II. Friction anisotropy, J Phys Chem B, 114, 15832, 10.1021/jp1064775
Schall, 2010, Effects of adhesion and transfer film formation on the tribology of self-mated DLC contacts, J Phys Chem C, 114, 5321, 10.1021/jp904871t
Zhu, 2016, Lubrication behavior of water molecules confined in TiO2 nanoslits: a molecular dynamics study, J Chem Eng Data, 61, 4023, 10.1021/acs.jced.6b00534
Harrison, 1992, Molecular-dynamics simulations of atomic-scale friction of diamond surfaces, Phys Rev B, 46, 9700, 10.1103/PhysRevB.46.9700
Zhang, 1997, Towards a deeper understanding of wear and friction on the atomic scale-a molecular dynamics analysis, Wear, 211, 44, 10.1016/S0043-1648(97)00073-2
Müser, 2001, Simple microscopic theory of Amontons's laws for static friction, Phys Rev Lett, 86, 1295, 10.1103/PhysRevLett.86.1295
Chandross, 2004, Systematic study of the effect of disorder on nanotribology of self-assembled monolayers, Phys Rev Lett, 93, 10.1103/PhysRevLett.93.166103
Mulliah, 2004, Modeling of stick-slip phenomena using molecular dynamics, Phys Rev B, 69, 10.1103/PhysRevB.69.205407
Tangney, 2004, Dynamic sliding friction between concentric carbon nanotubes, Phys Rev Lett, 93, 10.1103/PhysRevLett.93.065503
Ewen, 2016, Nonequilibrium molecular dynamics investigation of the reduction in friction and wear by carbon nanoparticles between iron surfaces, Tribol Lett, 63, 38, 10.1007/s11249-016-0722-7
Nakaoka, 2017, Molecular dynamics analysis of the friction between a water-methanol liquid mixture and a non-polar solid crystal surface, J Chem Phys, 146
Harrison, 1995, Investigation of the atomic-scale friction and energy dissipation in diamond using molecular dynamics, Thin Solid Films, 260, 205, 10.1016/0040-6090(94)06511-X
Bhattacharya, 2009, Analyzing Fe-Zn system using molecular dynamics, evolutionary neural nets and multi-objective genetic algorithms, Comput Mater Sci, 46, 821, 10.1016/j.commatsci.2009.04.023
Thompson, 1992, Phase transitions and universal dynamics in confined films, Phys Rev Lett, 68, 3448, 10.1103/PhysRevLett.68.3448
Cieplak, 1994, Molecular origins of friction: the force on adsorbed layers, Science, 265, 1209, 10.1126/science.265.5176.1209
Yan, 1998, Three-dimensional molecular dynamics analysis of atomic-scale indentation, J Tribol, 120, 385
Jabbarzadeh, 2000, Effect of the wall roughness on slip and rheological properties of hexadecane in molecular dynamics simulation of Couette shear flow between two sinusoidal walls, Phys Rev E, 61, 690, 10.1103/PhysRevE.61.690
Rigney, 2010, The evolution of tribomaterial during sliding: a brief introduction, Tribol Lett, 39, 3, 10.1007/s11249-009-9498-3
Aghababaei, 2016, Critical length scale controls adhesive wear mechanisms, Nat Commun, 7, 10.1038/ncomms11816
Junge, 2014, Plastic activity in nanoscratch molecular dynamics simulations of pure aluminium, Int J Plast, 53, 90, 10.1016/j.ijplas.2013.07.005
Romero, 2014, Coarse graining and localized plasticity between sliding nanocrystalline metals, Phys Rev Lett, 113, 10.1103/PhysRevLett.113.036101
Vahdat, 2014, Atomic-scale wear of amorphous hydrogenated carbon during intermittent contact: a combined study using experiment, simulation, and theory, Acs Nano, 8, 7027, 10.1021/nn501896e
Lorenz, 2009, Molecular dynamics simulations of water confined between matched pairs of hydrophobic and hydrophilic self-assembled monolayers, Langmuir, 25, 4535, 10.1021/la803940b
Doig, 2013, Structure and friction of stearic acid and oleic acid films adsorbed on iron oxide surfaces in squalane, Langmuir, 30, 186, 10.1021/la404024v
Savio, 2015, A multiscale study on the wall slip effect in a ceramic–steel contact with nanometer-thick lubricant film by a nano-to-elastohydrodynamic lubrication approach, J Tribol, 137
Martini, 2006, Molecular dynamics characterization of thin film viscosity for EHL simulation, Tribol Lett, 21, 217, 10.1007/s11249-006-9023-x
Vanossi, 2013, Colloquium: modeling friction: from nanoscale to mesoscale, Rev Mod Phys, 85, 529, 10.1103/RevModPhys.85.529
Levita, 2017, Effects of water intercalation and tribochemistry on MoS2 lubricity: an ab initio molecular dynamics investigation, ChemPhysChem, 18, 1475, 10.1002/cphc.201601143
Onodera, 2013, Antiwear chemistry of ZDDP: coupling classical MD and tight-binding quantum chemical MD methods (TB-QCMD), Tribol Lett, 50, 31, 10.1007/s11249-012-0063-0
Jones, 1924, On the determination of molecular fields. II. From the equation of state of a gas, Proc R Soc Lond A Math Phys Sci, 106, 463, 10.1098/rspa.1924.0082
Morse, 1929, Diatomic molecules according to the wave mechanics. II. Vibrational levels, Phys Rev, 34, 57, 10.1103/PhysRev.34.57
Luan, 2005, The breakdown of continuum models for mechanical contacts, Nature, 435, 929, 10.1038/nature03700
Luan, 2006, Contact of single asperities with varying adhesion: comparing continuum mechanics to atomistic simulations, Phys Rev E, 74, 10.1103/PhysRevE.74.026111
Heyes, 2012, Pressure dependence of confined liquid behavior subjected to boundary-driven shear, J Chem Phys, 136
Gattinoni, 2013, Traction and nonequilibrium phase behavior of confined sheared liquids at high pressure, Phys Rev E, 88, 10.1103/PhysRevE.88.052406
Maćkowiak, 2016, Non-equilibrium phase behavior and friction of confined molecular films under shear: a non-equilibrium molecular dynamics study, J Chem Phys, 145
Legoas, 2004, Molecular dynamics simulations of C 60 nanobearings, Chem Phys Lett, 386, 425, 10.1016/j.cplett.2004.01.096
Matsushita, 2005, Atomic scale friction between clean graphite surfaces, Solid State Commun, 136, 51, 10.1016/j.ssc.2005.05.052
Onodera, 2009, A computational chemistry study on friction of h-MoS2. Part I. Mechanism of single sheet lubrication, J Phys Chem B, 113, 16526, 10.1021/jp9069866
Ewen, 2016, Nonequilibrium molecular dynamics simulations of organic friction modifiers adsorbed on iron oxide surfaces, Langmuir, 32, 4450, 10.1021/acs.langmuir.6b00586
Daw, 1984, Embedded-atom method: derivation and application to impurities, surfaces, and other defects in metals, Phys Rev B, 29, 6443, 10.1103/PhysRevB.29.6443
Buldum, 1998, Contact, nanoindentation, and sliding friction, Phys Rev B, 57, 2468, 10.1103/PhysRevB.57.2468
Mulliah, 2006, Atomistic modelling of ploughing friction in silver, iron and silicon, Nanotechnology, 17, 1807, 10.1088/0957-4484/17/8/001
Narulkar, 2009, Graphitization as a precursor to wear of diamond in machining pure iron: a molecular dynamics investigation, Comput Mater Sci, 45, 358, 10.1016/j.commatsci.2008.10.007
Cao, 2010, Mechanical and tribological properties of Ni/Al multilayers-A molecular dynamics study, Appl Surf Sci, 257, 847, 10.1016/j.apsusc.2010.07.079
Lin, 2012, Molecular dynamics simulation of nano-scale interfacial friction characteristic for different tribopair systems, Appl Surf Sci, 258, 2022, 10.1016/j.apsusc.2011.04.117
Pauling, 1947, Atomic radii and interatomic distances in metals, J Am Chem Soc, 69, 542, 10.1021/ja01195a024
Finnis, 1984, A simple empirical N-body potential for transition metals, Philos Mag A, 50, 45, 10.1080/01418618408244210
Tersoff, 1988, New empirical approach for the structure and energy of covalent systems, Phys Rev B, 37, 6991, 10.1103/PhysRevB.37.6991
Brenner, 1990, Empirical potential for hydrocarbons for use in simulating the chemical vapor deposition of diamond films, Phys Rev B, 42, 9458, 10.1103/PhysRevB.42.9458
Stuart, 2000, A reactive potential for hydrocarbons with intermolecular interactions, J Chem Phys, 112, 6472
Van Duin, 2001, ReaxFF: a reactive force field for hydrocarbons, J Phys Chem, 105, 9396, 10.1021/jp004368u
Perry, 1995, Universal aspects of the atomic-scale friction of diamond surfaces, J Phys Chem, 99, 9960, 10.1021/j100024a044
Servantie, 2006, Translational dynamics and friction in double-walled carbon nanotubes, Phys Rev B, 73, 10.1103/PhysRevB.73.125428
Gao, 2007, Atomic-scale friction on diamond: a comparison of different sliding directions on (001) and (111) surfaces using MD and AFM, Langmuir, 23, 5394, 10.1021/la062254p
Kim, 2012, Molecular dynamics simulation of atomic-scale frictional behavior of corrugated nano-structured surfaces, Nanoscale, 4, 3937, 10.1039/c2nr30691c
Stoyanov, 2013, Friction and wear mechanisms of tungsten–carbon systems: a comparison of dry and lubricated conditions, ACS Appl Mater Interfaces, 5, 6123, 10.1021/am4010094
Sawyer, 2008, Integrating experimental and simulation length and time scales in mechanistic studies of friction, J Phys Condens Matter, 20, 10.1088/0953-8984/20/35/354012
Huang, 2012, Atomistic simulations of shearing friction and dynamic adhesion of double-walled carbon nanotubes on Au substrates, Composites Sci Technol, 72, 599, 10.1016/j.compscitech.2012.01.004
Wen, 2016, Atomic insight into tribochemical wear mechanism of silicon at the Si/SiO2 interface in aqueous environment: molecular dynamics simulations using ReaxFF reactive force field, Appl Surf Sci, 390, 216, 10.1016/j.apsusc.2016.08.082
Yeon, 2017, Mechanochemistry at solid surfaces: polymerization of adsorbed molecules by mechanical shear at tribological interfaces, ACS Appl Mater Interfaces, 9, 3142, 10.1021/acsami.6b14159
Campaná, 2006, Practical Green's function approach to the simulation of elastic semi-infinite solids, Phys Rev B, 74, 10.1103/PhysRevB.74.075420
Kong, 2009, Implementation of Green's function molecular dynamics: an extension to LAMMPS, Comput Phys Commun, 180, 1004, 10.1016/j.cpc.2008.12.035
De Barros Bouchet, 2015, Energy filtering transmission electron microscopy and atomistic simulations of tribo-induced hybridization change of nanocrystalline diamond coating, Carbon, 87, 317, 10.1016/j.carbon.2015.02.041
Loehle, 2014, Mixed lubrication with C18 fatty acids: effect of unsaturation, Tribol Lett, 53, 319, 10.1007/s11249-013-0270-3
De Barros-Bouchet, 2015, Tribochemistry of phosphorus additives: experiments and first-principles calculations, RSC Adv, 5, 49270, 10.1039/C5RA00721F
Pastewka, 2013, Screened empirical bond-order potentials for Si-C, Phys Rev B, 87, 10.1103/PhysRevB.87.205410
Loehlé, 2015, Mixed lubrication of steel by C18 fatty acids revisited. Part I: toward the formation of carboxylate, Tribol Int, 82, 218, 10.1016/j.triboint.2014.10.020
Levita, 2014, Sliding properties of MoS2 layers: load and interlayer orientation effects, J Phys Chem, 118, 13809, 10.1021/jp4098099
Wriggers, 2009, Multi-scale approach for frictional contact of elastomers on rough rigid surfaces, Comput Methods Appl Mech Eng, 198, 1996, 10.1016/j.cma.2008.12.021
Ciavarella, 2000, Elastic multiscale contact of rough surfaces: Archard's model revisited and comparisons with modern fractal models, J Appl Mech, 68, 496, 10.1115/1.1352016
Borri-Brunetto, 1999, Scaling phenomena due to fractal contact in concrete and rock fractures, Int J Fract, 95, 221, 10.1023/A:1018656403170
Zavarise, 2007, On the resolution dependence of micromechanical contact models, Wear, 262, 42, 10.1016/j.wear.2006.03.044
Pastewka, 2012, Seamless elastic boundaries for atomistic calculations, Phys Rev B, 86, 10.1103/PhysRevB.86.075459
Anciaux, 2012, A finite temperature bridging domain method for MD-FE coupling and application to a contact problem, Comput Methods Appl Mech Eng, 205, 204, 10.1016/j.cma.2011.01.012
Budarapu, 2017, Concurrently coupled solid shell-based adaptive multiscale method for fracture, Comput Methods Appl Mech Eng, 319, 338, 10.1016/j.cma.2017.02.023
Shilkrot, 2004, Multiscale plasticity modeling: coupled atomistics and discrete dislocation mechanics, J Mech Phys Solids, 52, 755, 10.1016/j.jmps.2003.09.023
Siang, 2016, Discrete dislocation plasticity analysis of contact between deformable bodies of simple geometry, Modell Simul Mater Sci Eng, 24
Chang, 2010, Multiscale modelling of indentation in FCC metals: from atomic to continuum, Compt Rendus Phys, 11, 285, 10.1016/j.crhy.2010.07.007
Murthy, 2005, Review of multiscale simulation in submicron heat transfer, Int J Multiscale Comput Eng, 3, 10.1615/IntJMultCompEng.v3.i1.20
Savio, 2016, Boundary lubrication of heterogeneous surfaces and the onset of cavitation in frictional contacts, Sci Adv, 2, 10.1126/sciadv.1501585
Cho, 2017, Mobility law of dislocations with several character angles and temperatures in FCC aluminum, Int J Plast, 90, 66, 10.1016/j.ijplas.2016.12.004
Cho, 2015, Toward a 3D coupled atomistic and discrete dislocation dynamics simulation: dislocation core structures and Peierls stresses with several character angles in FCC aluminum, Adv Mod Simulat Eng Sci, 2, 12, 10.1186/s40323-015-0028-6
Smith, 2012, Control-volume representation of molecular dynamics, Phys Rev E, 85, 10.1103/PhysRevE.85.056705
Smith, 2015, A localized momentum constraint for non-equilibrium molecular dynamics simulations, J Chem Phys, 142
Flekkøy, 2000, Hybrid model for combined particle and continuum dynamics, EPL (Europhys Lett), 52, 271, 10.1209/epl/i2000-00434-8
Nie, 2004, A continuum and molecular dynamics hybrid method for micro-and nano-fluid flow, J Fluid Mech, 500, 55, 10.1017/S0022112003007225
Ren, 2007, Analytical and numerical study of coupled atomistic-continuum methods for fluids, J Comput Phys, 227, 1353, 10.1016/j.jcp.2007.09.007
Yamashita, 2015, Scale dependence of rock friction at high work rate, Nature, 528, 254, 10.1038/nature16138
Hatano, 2008, Scaling properties of granular rheology near the jamming transition, J Phys Soc Jpn, 77, 10.1143/JPSJ.77.123002
Szolwinski, 1999, In-situ measurement of near-surface fretting contact temperatures in an aluminum alloy, J Tribol, 121, 11
Scheibert, 2008, Experimental evidence of non-Amontons behaviour at a multi-contact interface, EPL, 83, 34003, 10.1209/0295-5075/83/34003
Scheibert, 2009, Stress field at a sliding frictional contact: experiments and calculations, J Mech Phys Solids, 57, 1921, 10.1016/j.jmps.2009.08.008
Dieterich, 1994, Direct observation of frictional contacts: new insights for state-dependent properties, Pure Appl Geophys, 143, 283, 10.1007/BF00874332
Bayart, 2016, Fracture mechanics determine the lengths of interface ruptures that mediate frictional motion, Nat Phys, 12, 166, 10.1038/nphys3539
Kammer, 2015, Linear elastic fracture mechanics predicts the propagation distance of frictional slip, Tribol Lett, 57, 23, 10.1007/s11249-014-0451-8
Nguyen, 2011, Surface pressure and shear stress fields within a frictional contact on rubber, J Adhes, 87, 235
Woo, 1980, Contact of rough surfaces: a review of experimental work, Wear, 58, 331, 10.1016/0043-1648(80)90162-3
Lorenz, 2010, Leak rate of seals: effective-medium theory and comparison with experiment, Eur Phys J Soft Matter and Biol Phys, 31, 159, 10.1140/epje/i2010-10558-6
Putignano, 2013, Experimental investigation of viscoelastic rolling contacts: a comparison with theory, Tribol Lett, 51, 105, 10.1007/s11249-013-0151-9
Carbone, 2014, Rough viscoelastic sliding contact: theory and experiments, Phys Rev E, 89, 10.1103/PhysRevE.89.032408
Hild, 2006, Digital image correlation: from displacement measurement to identification of elastic properties– a review, Strain, 42, 69, 10.1111/j.1475-1305.2006.00258.x
Usamentiaga, 2014, Infrared thermography for temperature measurement and non-destructive testing, Sensors, 14, 10.3390/s140712305
Chen, 2001, Ballistic-diffusive heat-conduction equations, Phys Rev Lett, 86, 2297, 10.1103/PhysRevLett.86.2297
Anciaux, 2013, A molecular dynamics and finite elements study of nanoscale thermal contact conductance, Int J Heat Mass Tran, 59, 384, 10.1016/j.ijheatmasstransfer.2012.12.003
Madhusudana, 1996
Bowden, 2001
Rice, 2006, Heating and weakening of faults during earthquake slip, J Geophys Res B Sol Ea, 111
Goldsby, 2011, Flash heating leads to low frictional strength of crustal rocks at earthquake slip rates, Science, 334, 216, 10.1126/science.1207902
Ramesh, 2008, Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel, Int J Mach Tools Manuf, 48, 402, 10.1016/j.ijmachtools.2007.09.007
Ward, 2004, The science and technology of hot compaction, Polymer, 45, 1413, 10.1016/j.polymer.2003.11.050
Collettini, 2013, Thermal decomposition along natural carbonate faults during earthquakes, Geology, 41, 927, 10.1130/G34421.1
Dresel, 2007
Müller, 1998
Power, 1997, Topography of natural and artificial fractures in granitic rocks: implications for studies of rock friction and fluid migration, Int J Rock Mech Min Sci, 34, 979, 10.1016/S1365-1609(97)80007-X
Rajagopal, 2003, On an inconsistency in the derivation of the equations of elastohydrodynamic lubrication, Proc Royal Soc Lond A, 459, 2771, 10.1098/rspa.2003.1145
Zilibotti, 2013, Load-induced confinement activates diamond lubrication by water, Phys Rev Lett, 111, 10.1103/PhysRevLett.111.146101
Dapp, 2012, Self-affine elastic contacts: percolation and leakage, Phys Rev Lett, 108, 10.1103/PhysRevLett.108.244301
Barber, 2003, Bounds on the electrical resistance between contacting elastic rough bodies, Proc Roy Soc Lond Math Phys Eng Sci, 459, 53, 10.1098/rspa.2002.1038
Persson, 2014, On the fractal dimension of rough surfaces, Tribol Lett, 54, 99, 10.1007/s11249-014-0313-4
Hu, 1992, Simulation of 3-D random rough surface by 2-D digital filter and fourier analysis, Int J Mach Tool Manufact, 32, 83, 10.1016/0890-6955(92)90064-N
Meakin, 1998
Suh, 2003, Detailed surface roughness characterization of engineering surfaces undergoing tribological testing leading to scuffing, Wear, 255, 556, 10.1016/S0043-1648(03)00224-2
Deltombe, 2014, How to select the most relevant 3D roughness parameters of a surface, Scanning, 36, 150, 10.1002/sca.21113
Whitehouse, 1970, The properties of random surfaces of significance in their contact, Proc R Soc Lond A Math Phys Sci, 316, 97, 10.1098/rspa.1970.0068
Sayles, 1978, Surface topography as a nonstationary random process, Nature, 271, 431, 10.1038/271431a0
Bowden, 1953, 197
Guduru, 2007, Detachment of a rigid solid from an elastic wavy surface: theory, J Mech Phys Solids, 55, 445, 10.1016/j.jmps.2006.09.004
Borodich, 2016, Statistical approaches to description of rough engineering surfaces at nano and microscales, Tribol Int, 103, 197, 10.1016/j.triboint.2016.06.043
Ciavarella, 2017, A modified form of Pastewka-Robbins criterion for adhesion, J Adhes, 94, 155
Ciavarella, 2017, On Pastewka and Robbins' criterion for macroscopic adhesion of rough surfaces, J Tribol, 139
Jacobs, 2017, Measuring and understanding contact area at the nanoscale: a review, Appl Mech Rev, 69, 10.1115/1.4038130
Ciavarella, 2017, Discussion of “measuring and understanding contact area at the nanoscale: a review”, (Jacobs, TDB, and Martini, A, 2017, ASME Appl. Mech. Rev., 69(6), p. 060802), Appl Mech Rev, 69, 10.1115/1.4038188
Ciavarella, 2018, On the sensitivity of adhesion between rough surfaces to asperity height distribution, Phys Mesomech, 21, 59, 10.1134/S1029959918010083
Rapetto, 2009, On the influence of surface roughness on real area of contact in normal, dry, friction free, rough contact by using a neural network, Wear, 266, 592, 10.1016/j.wear.2008.04.059
Solhjoo, 2017, Surface roughness of gold substrates at the nanoscale: an atomistic simulation study, Tribol Int, 115, 165, 10.1016/j.triboint.2017.05.024
Krim, 1995, Experimental observations of self-affine scaling and kinetic roughening at sub-micron lengthscales, Int J Mod Phys B, 9, 599, 10.1142/S0217979295000239
Abbott, 1933, Specifying surface quality, Mech Eng, 65, 569
Jiang, 2007, Paradigm shifts in surface metrology. Part I, Hist Philos, 463, 2049
Jiang, 2007, Paradigm shifts in surface metrology. Part II, Current Shift, 463, 2071
Gao, 2007, Surface measurement errors using commercial scanning white light interferometers, Meas Sci Technol, 19
Schwarz, 1994, Tip artefacts in scanning force microscopy, J Microsc, 173, 183, 10.1111/j.1365-2818.1994.tb03441.x
Lechenault, 2010, Effects of finite probe size on self-affine roughness measurements, Phys Rev Lett, 104, 10.1103/PhysRevLett.104.025502
Almqvist, 2007, Homogenization of the unstationary incompressible Reynolds equation, Tribol Int, 40, 1344, 10.1016/j.triboint.2007.02.021
Poon, 1995, Comparison of surface roughness measurements by stylus profiler, AFM and non-contact optical profiler, Wear, 190, 76, 10.1016/0043-1648(95)06697-7
Spencer, 2013, The influence of AFM and VSI techniques on the accurate calculation of tribological surface roughness parameters, Tribol Int, 57, 242, 10.1016/j.triboint.2012.09.001
Anciaux, 2009, Contact mechanics at the nanoscale, a 3D multiscale approach, Int J Numer Methods Eng, 79, 1041, 10.1002/nme.2590
Solhjoo, 2015, Single asperity nanocontacts: comparison between molecular dynamics simulations and continuum mechanics models, Comp Mater Sci, 99, 209, 10.1016/j.commatsci.2014.12.010
Solhjoo, 2015, Definition and detection of contact in atomistic simulations, Comput Mater Sci, 109, 172, 10.1016/j.commatsci.2015.07.026
Sahli, 2018, Evolution of real contact area under shear and the value of static friction of soft materials, Proc Natl Acad Sci U S A, 115, 471, 10.1073/pnas.1706434115
Yu, 2004, Adhesive contact based on the Lennard-Jones potential: a correction to the value of the equilibrium distance as used in the potential, J Colloid Interface Sci, 278, 428, 10.1016/j.jcis.2004.06.029
Pastewka, 2016, Contact area of rough spheres: large scale simulations and simple scaling laws, Appl Phys Lett, 108, 221601, 10.1063/1.4950802
Taylor, 1992, Ultraviolet photoelectron spectra of coinage metal clusters, J Chem Phys, 96, 3319
Mills, 2003, Oxygen adsorption on Au clusters and a rough Au(111) surface: the role of surface flatness, electron confinement, excess electrons, and band gap, J Chem Phys, 118, 4198
Gee, 1990, Liquid to solidlike transitions of molecularly thin films under shear, J Chem Phys, 93, 1895
Landman, 1996, Atomic-scale issues in tribology: interfacial junctions and nano-elastohydrodynamics, Langmuir, 12, 4514, 10.1021/la950890+
Demirel, 2001, Origins of solidification when a simple molecular fluid is confined between two plates, J Chem Phys, 115, 1498
Savio, 2013, A molecular dynamics study of the transition from ultra-thin film lubrication toward local film breakdown, Tribol Lett, 50, 207, 10.1007/s11249-013-0113-2
Fukuzawa, 2003, Fiber wobbling shear force measurement for nanotribology of confined lubricant molecules, IEEE Trans Magn, 39, 2453, 10.1109/TMAG.2003.816435
Itoh, 2008, Fiber wobbling method for dynamic viscoelastic measurement of liquid lubricant confined in molecularly narrow gaps, Tribol Lett, 30, 177, 10.1007/s11249-008-9325-2
Vakis, 2011, Modeling bearing and shear forces in molecularly thin lubricants, Tribol Lett, 41, 573, 10.1007/s11249-010-9736-8
Williams, 2005
Goldman, 1967, Slow viscous motion of a sphere parallel to a plane wall–II Couette flow, Chem Eng Sci, 22, 653, 10.1016/0009-2509(67)80048-4
Fukuzawa, 2010, Simultaneously measuring lateral and vertical forces with accurate gap control for clarifying lubrication phenomena at nanometer gap, Tribol Lett, 37, 497, 10.1007/s11249-009-9545-0
Nicola, 2008, Multi-asperity contact: a comparison between discrete dislocation and crystal plasticity predictions, Phil Mag, 88, 3713, 10.1080/14786430802566372
Li, 2012, Crystal plasticity finite modelling of 3D surface asperity flattening in uniaxial planar compression, Tribol Lett, 46, 101, 10.1007/s11249-012-9925-8
Sabnis, 2013, Crystal plasticity analysis of cylindrical indentation on a Ni-base single crystal superalloy, Int J Plast, 51, 200, 10.1016/j.ijplas.2013.05.004
Renner, 2016, Sensitivity of the residual topography to single crystal plasticity parameters in Berkovich nanoindentation on FCC nickel, Int J Plast, 77, 118, 10.1016/j.ijplas.2015.10.002
Liu, 2008, Orientation effects in nanoindentation of single crystal copper, Int J Plast, 24, 1990, 10.1016/j.ijplas.2008.02.009
Kucharski, 2014, Surface pile-up patterns in indentation testing of Cu single crystals, Exp Mech, 54, 957, 10.1007/s11340-014-9883-1
Wang, 2004, Orientation dependence of nanoindentation pile-up patterns and of nanoindentation microtextures in copper single crystals, Acta Mater, 52, 2229, 10.1016/j.actamat.2004.01.016
Nix, 1998, Indentation size effects in crystalline materials: a law for strain gradient plasticity, J Mech Phys Solids, 46, 411, 10.1016/S0022-5096(97)00086-0
Pharr, 2010, The indentation size effect: a critical examination of experimental observations and mechanistic interpretations, Annu Rev Mater Res, 40, 271, 10.1146/annurev-matsci-070909-104456
Gurtin, 2000, On the plasticity of single crystals: free energy, microforces, plastic-strain gradients, J Mech Phys Solids, 48, 989, 10.1016/S0022-5096(99)00059-9
Evers, 2004, Non-local crystal plasticity model with intrinsic SSD and GND effects, J Mech Phys Solids, 52, 2379, 10.1016/j.jmps.2004.03.007
Han, 2005, Mechanism-based strain gradient crystal plasticity—I. Theory, J Mech Phys Solids, 53, 1188, 10.1016/j.jmps.2004.08.008
Petryk, 2016, A minimal gradient-enhancement of the classical continuum theory of crystal plasticity. Part I: the hardening law, Arch Mech, 68, 459
Stupkiewicz, 2016, A minimal gradient-enhancement of the classical continuum theory of crystal plasticity. Part II: size effects, Arch Mech, 68, 487
Lee, 2010, Simulation of micro-indentation hardness of FCC single crystals by mechanism-based strain gradient crystal plasticity, Int J Plast, 26, 1527, 10.1016/j.ijplas.2010.01.011
Song, 2016, Strain gradient plasticity analysis of elasto-plastic contact between rough surfaces, J Mech Phys Solids, 96, 18, 10.1016/j.jmps.2016.07.008
Fivel, 1998, Three-dimensional modeling of indent-induced plastic zone at a mesoscale, Acta Mater, 46, 6183, 10.1016/S1359-6454(98)00278-X
Sun, 2015, Interaction between neighboring asperities during flattening: a discrete dislocation plasticity analysis, Mech Mater, 90, 157, 10.1016/j.mechmat.2015.04.012
Yin, 2012, A discrete dislocation plasticity analysis of a single-crystal semi-infinite medium indented by a rigid surface exhibiting multi-scale roughness, Phil Mag, 92, 2984, 10.1080/14786435.2012.682178
Deshpande, 2004, Discrete dislocation plasticity analysis of static friction, Acta Mater, 52, 3135, 10.1016/j.actamat.2004.03.018
Song, 2017, Statistical model of rough surface contact accounting for size-dependent plasticity and asperity interaction, J Mech Phys Solid, 106, 1, 10.1016/j.jmps.2017.05.014
Raj, 1971, On grain boundary sliding and diffusional creep, Metall Mater Trans B, 2, 1113, 10.1007/BF02664244
Van Swygenhoven, 2001, Grain-boundary sliding in nanocrystalline fcc metals, Phys Rev B, 64, 10.1103/PhysRevB.64.224105
Argibay, 2017, Linking microstructural evolution and macro-scale friction behavior in metals, J Mater Sci, 52, 2780, 10.1007/s10853-016-0569-1
Stoyanov, 2013, Experimental and numerical atomistic investigation of the third body formation process in dry tungsten/tungsten-carbide tribo couples, Tribol Lett, 50, 67, 10.1007/s11249-012-0085-7
Bosheh, 2006, White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling, Int J Mach Tools Manuf, 46, 225, 10.1016/j.ijmachtools.2005.04.009
Ranganath, 2009, A finite element modeling approach to predicting white layer formation in nickel superalloys, CIRP Ann - Manuf Technol, 58, 77, 10.1016/j.cirp.2009.03.109
Lindroos, 2015, The effect of impact conditions on the wear and deformation behavior of wear resistant steels, Wear, 328, 197, 10.1016/j.wear.2015.02.032
Nagata, 2012, A revised rate-and state-dependent friction law obtained by constraining constitutive and evolution laws separately with laboratory data, J Geophys Res Sol Ea, 117
Stachowiak, 2013
Prandtl, 1928, Ein Gedankenmodell zur kinetischen Theorie der festen Körper, ZAMM-J Appl Math Mech/Z Angew Math Mech, 8, 85, 10.1002/zamm.19280080202
Müser, 2003, Statistical mechanics of static and low-velocity kinetic friction, Adv Chem Phys, 126, 187
Cammarata, 2015, Tailoring nanoscale friction in MX2 transition metal dichalcogenides, Inorg Chem, 54, 5739, 10.1021/acs.inorgchem.5b00431
Rubinstein, 2004, Detachment fronts and the onset of dynamic friction, Nature, 430, 1005, 10.1038/nature02830
Trømborg, 2014, Slow slip and the transition from fast to slow fronts in the rupture of frictional interfaces, Proc Natl Acad Sci, 111, 8764, 10.1073/pnas.1321752111
Prevost, 2013, Probing the micromechanics of a multi-contact interface at the onset of frictional sliding, Eur Phys J E, 36, 17, 10.1140/epje/i2013-13017-0
Paggi, 2014, Partial-slip frictional response of rough surfaces, Sci Rep, 4, 5178, 10.1038/srep05178
Coulomb, 1821
Bar-Sinai, 2014, On the velocity-strengthening behavior of dry friction, J Geophys Res Sol Ea, 119, 1738, 10.1002/2013JB010586
Popova, 2015, The research works of Coulomb and Amontons and generalized laws of friction, Friction, 3, 183, 10.1007/s40544-015-0074-6
Adams, 2000, Radiation of body waves induced by the sliding of an elastic half-space against a rigid surface, J Appl Mech, 67, 1, 10.1115/1.321144
Ben-David, 2011, Static friction coefficient is not a material constant, Phys Rev Lett, 106, 10.1103/PhysRevLett.106.254301
Ben-David, 2010, Slip-stick and the evolution of frictional strength, Nature, 463, 76, 10.1038/nature08676
Scheibert, 2010, Role of friction-induced torque in stick-slip motion, EPL, 92, 54001, 10.1209/0295-5075/92/54001
Otsuki, 2013, Systematic breakdown of Amontons' law of friction for an elastic object locally obeying Amontons' law, Sci Rep, 3, 1586, 10.1038/srep01586
Farkas, 2005, Static versus dynamic friction: the role of coherence, J Stat Mech Theor Exp, 2005
Baumberger, 2006, Solid friction from stick-slip down to pinning and aging, Adv Phys, 55, 279, 10.1080/00018730600732186
Marone, 1998, Laboratory-derived friction laws and their application to seismic faulting, Annu Rev Earth Planet Sci, 26, 643, 10.1146/annurev.earth.26.1.643
Ronsin, 2001, State, rate and temperature-dependent sliding friction of elastomers, Proc R Soc Lond A, 457, 1277, 10.1098/rspa.2000.0718
Bureau, 2002, Rheological aging and rejuvenation in solid friction contacts, Eur Phys J E, 8, 331, 10.1140/epje/i2002-10017-1
Li, 2011, Frictional ageing from interfacial bonding and the origins of rate and state friction, Nature, 480, 233, 10.1038/nature10589
McGraw, 2017, Contact dependence and velocity crossover in friction between microscopic solid/solid contacts, Nano letters, 17, 6335, 10.1021/acs.nanolett.7b03076
Rubinstein, 2007, Dynamics of precursors to frictional sliding, Phys Rev Lett, 98, 10.1103/PhysRevLett.98.226103
Ben-David, 2010, The dynamics of the onset of frictional slip, Science, 330, 211, 10.1126/science.1194777
Svetlizky, 2014, Classical shear cracks drive the onset of dry frictional motion, Nature, 509, 205, 10.1038/nature13202
Svetlizky, 2016, Properties of the shear stress peak radiated ahead of rapidly accelerating rupture fronts that mediate frictional slip, Proc Natl Acad Sci, 113, 542, 10.1073/pnas.1517545113
Caroli, 1998, Hysteresis and elastic interactions of microasperities in dry friction, Eur Phys J B Condens Matter Complex Syst, 4, 233, 10.1007/s100510050374
Braun, 2009, Dynamics of transition from static to kinetic friction, Phys Rev Lett, 103, 10.1103/PhysRevLett.103.194301
Maegawa, 2010, Precursors of global slip in a longitudinal line contact under non-uniform normal loading, Tribol Lett, 38, 313, 10.1007/s11249-010-9611-7
Amundsen, 2012, 1D model of precursors to frictional stick-slip motion allowing for robust comparison with experiments, Tribol Lett, 45, 357, 10.1007/s11249-011-9894-3
Braun, 2014, Propagation length of self-healing slip pulses at the onset of sliding: a toy model, Tribol Lett, 56, 553, 10.1007/s11249-014-0432-y
Papangelo, 2014, A simple model for friction detachment at an interface of finite size mimicking Fineberg's experiments on uneven loading, Phys Mesomech, 17, 311, 10.1134/S1029959914040080
Trømborg, 2011, Transition from static to kinetic friction: insights from a 2D model, Phys Rev Lett, 107, 10.1103/PhysRevLett.107.074301
Radiguet, 2013, Survival of heterogeneous stress distributions created by precursory slip at frictional interfaces, Phys Rev Lett, 111, 10.1103/PhysRevLett.111.164302
Scholz, 2002
Amundsen, 2015, Steady-state propagation speed of rupture fronts along one-dimensional frictional interfaces, Phys Rev E, 92, 10.1103/PhysRevE.92.032406
Chateauminois, 2010, Friction and shear fracture of an adhesive contact under torsion, Phys Rev E, 81, 10.1103/PhysRevE.81.026106
Bar-Sinai, 2013, Instabilities at frictional interfaces: creep patches, nucleation, and rupture fronts, Phys Rev E, 88
Kaproth, 2013, Slow earthquakes, preseismic velocity changes, and the origin of slow frictional stick-slip, Science, 341, 1229, 10.1126/science.1239577
Trømborg, 2015, Speed of fast and slow rupture fronts along frictional interfaces, Phys Rev E, 92, 10.1103/PhysRevE.92.012408
Thøgersen, 2014, History-dependent friction and slow slip from time-dependent microscopic junction laws studied in a statistical framework, Phys Rev E, 89, 10.1103/PhysRevE.89.052401
Grosch, 1963, The relation between the friction and visco elastic properties of rubber, Proc R Soc Lond A, 274, 21, 10.1098/rspa.1963.0112
Tuononen, 2014, Digital image correlation to analyse stick–slip behaviour of tyre tread block, Tribol Int, 69, 70, 10.1016/j.triboint.2013.09.003
Tuononen, 2016, Onset of frictional sliding of rubber-glass contact under dry and lubricated conditions, Sci Rep, 6, 27951, 10.1038/srep27951
Chateauminois, 2008, Local friction at a sliding interface between an elastomer and a rigid spherical probe, Eur Phys J E Soft Matter Biol Phys, 27, 221, 10.1140/epje/i2008-10376-5
Audry, 2012, Slip dynamics at a patterned rubber/glass interface during stick-slip motions, Eur Phys J E Soft Matter Biol Phys, 35, 10.1140/epje/i2012-12083-0
Brörmann, 2013, Friction on a microstructured elastomer surface, Tribol Lett, 50, 3, 10.1007/s11249-012-0044-3
Tworzydlo, 1998, Computational micro-and macroscopic models of contact and friction: formulation, approach and applications, Wear, 220, 113, 10.1016/S0043-1648(98)00194-X
Brzoza, 2008, Torsion of rough elastic half-space by rigid punch, Arch Appl Mech, 78, 531, 10.1007/s00419-007-0176-3
Frétigny, 2017, Contact of a spherical probe with a stretched rubber substrate, Phys Rev E, 96, 10.1103/PhysRevE.96.013001
Arzt, 2003, From micro to nano contacts in biological attachment devices, Proc Natl Acad Sci U S A, 100, 10603, 10.1073/pnas.1534701100
Varenberg, 2010, Spatulate structures in biological fibrillar adhesion, Soft Matter, 6, 3269, 10.1039/c003207g
Filippov, 2011, Shear induced adhesion: contact mechanics of biological spatula-like attachment devices, J Theor Biol, 276, 126, 10.1016/j.jtbi.2011.01.049
Labonte, 2014, Surface contact and design of fibrillar 'friction pads' in stick insects (Carausius morosus): mechanisms for large friction coefficients and negligible adhesion, J R Soc Interface, 11, 10.1098/rsif.2014.0034
Barthlott, 1997, Purity of the sacred lotus, or escape from contamination in biological surfaces, Planta, 202, 1, 10.1007/s004250050096
Burton, 2006, Surface characterization and adhesion and friction properties of hydrophobic leaf surfaces, Ultramicroscopy, 106, 709, 10.1016/j.ultramic.2005.10.007
Stempflé, 2006, Tribological behaviour of nacre—influence of the environment on the elementary wear processes, Tribol Int, 39, 1485, 10.1016/j.triboint.2006.01.011
Baum, 2014, Anisotropic friction of the ventral scales in the snake Lampropeltis getula californiae, Tribol Lett, 54, 139, 10.1007/s11249-014-0319-y
Dean, 2010, Shark-skin surfaces for fluid-drag reduction in turbulent flow: a review, Philos Trans A Math Phys Eng Sci, 368, 4775, 10.1098/rsta.2010.0201
Federle, 2006, Wet but not slippery: boundary friction in tree frog adhesive toe pads, J R Soc Interface, 3, 689, 10.1098/rsif.2006.0135
Prevost, 2009, Effect of fingerprints orientation on skin vibrations during tactile exploration of textured surfaces, Commun Integr Biol, 2, 422, 10.4161/cib.2.5.9052
Derler, 2012, Tribology of skin: review and analysis of experimental results for the friction coefficient of human skin, Tribol Lett, 45, 1, 10.1007/s11249-011-9854-y
Leyva-Mendivil, 2017, Skin microstructure is a key contributor to its friction behaviour, Tribol Lett, 65, 12, 10.1007/s11249-016-0794-4
Fratzl, 2007, Nature's hierarchical materials, Prog Mater Sci, 52, 1263, 10.1016/j.pmatsci.2007.06.001
Yurdumakan, 2005, Synthetic gecko foot-hairs from multiwalled carbon nanotubes, Chem Commun, 3799, 10.1039/b506047h
Lee, 2009, Gecko-inspired combined lamellar and nanofibrillar array for adhesion on nonplanar surface, Langmuir, 25, 12449, 10.1021/la9029672
Singh, 2013, Biomimetic patterned surfaces for controllable friction in micro-and nanoscale devices, Micro Nano Syst Lett, 1, 6, 10.1186/2213-9621-1-6
Murarash, 2011, Tuning elastomer friction by hexagonal surface patterning, Soft Matter, 7, 5553, 10.1039/c1sm00015b
Li, 2016, Tuning apparent friction coefficient by controlled patterning bulk metallic glasses surfaces, Sci Rep, 6, 39388, 10.1038/srep39388
Borghi, 2008, Tribological effects of surface texturing on nitriding steel for high-performance engine applications, Wear, 265, 1046, 10.1016/j.wear.2008.02.011
Gualtieri, 2009, Increasing nanohardness and reducing friction of nitride steel by laser surface texturing, Tribol Int, 42, 699, 10.1016/j.triboint.2008.09.008
Baum, 2014, Dry friction of microstructured polymer surfaces inspired by snake skin, Beilstein J Nanotechnol, 5, 1091, 10.3762/bjnano.5.122
Maegawa, 2016, Effect of surface grooves on kinetic friction of a rubber slider, Tribol Int, 102, 326, 10.1016/j.triboint.2016.05.019
He, 2008, Surface texture effect on friction of a microtextured poly (dimethylsiloxane)(PDMS), Tribol Lett, 31, 187, 10.1007/s11249-008-9351-0
Tay, 2011, A tribological study of SU-8 micro-dot patterns printed on Si surface in a flat-on-flat reciprocating sliding test, Tribol Lett, 44, 167, 10.1007/s11249-011-9835-1
Greiner, 2014, Contact splitting and the effect of dimple depth on static friction of textured surfaces, ACS Appl Mater Interfaces, 6, 7986, 10.1021/am500879m
Giraud, 2017, Lubrication with soft and hard two-dimensional colloidal arrays, Langmuir, 33, 3610, 10.1021/acs.langmuir.7b00006
Capozza, 2008, Lubricated friction on nanopatterned surfaces via molecular dynamics simulations, Phys Rev B, 77, 10.1103/PhysRevB.77.235432
Burridge, 1967, Model and theoretical seismicity, Bull Seismol Soc Am, 57, 341, 10.1785/BSSA0570030341
Capozza, 2015, Effect of surface grooves on the static friction of an elastic slider, Tribol Lett, 58, 35, 10.1007/s11249-015-0510-9
Costagliola, 2016, Static and dynamic friction of hierarchical surfaces, Phys Rev E, 94, 10.1103/PhysRevE.94.063003
Costagliola, 2017, Hierarchical spring-block model for multiscale friction problems, ACS Biomater Sci Eng, 3, 2845, 10.1021/acsbiomaterials.6b00709
Costagliola, 2018, A 2-D model for friction of complex anisotropic surfaces, J Mech Phys Solids, 112, 50, 10.1016/j.jmps.2017.11.015
Pugno, 2013, A generalization of the Coulomb's friction law: from graphene to macroscale, Meccanica, 48, 1845, 10.1007/s11012-013-9789-5
Tabor, 1977, Surface forces and surface interactions, J Colloid Interface Sci, 58, 2, 10.1016/0021-9797(77)90366-6
Muller, 1980, On the influence of molecular forces on the deformation of an elastic sphere and its sticking to a rigid plane, J Colloid Interface Sci, 77, 91, 10.1016/0021-9797(80)90419-1
Greenwood, 1997, Adhesion of elastic spheres, Proc Roy Soc Lond Math Phys Eng Sci, 453, 1277, 10.1098/rspa.1997.0070
Ciavarella, 2017, Effect of Tabor parameter on hysteresis losses during adhesive contact, J Mech Phys Solids, 98, 236, 10.1016/j.jmps.2016.10.005
Greenwood, 1998, An alternative to the Maugis model of adhesion between elastic spheres, J Phys D, 31, 3279, 10.1088/0022-3727/31/22/017
Maugis, 1992, Adhesion of spheres: the JKR-DMT transition using a dugdale model, J Colloid Interface Sci, 150, 243, 10.1016/0021-9797(92)90285-T
Sauer, 2007, An atomic interaction-based continuum model for adhesive contact mechanics, Finite Elem Anal Des, 43, 384, 10.1016/j.finel.2006.11.009
Sauer, 2009, Formulation and analysis of a three-dimensional finite element implementation for adhesive contact at the nanoscale, Comput Methods Appl Mech Eng, 198, 3871, 10.1016/j.cma.2009.08.019
Du, 2007, A finite element model of loading and unloading of an asperity contact with adhesion and plasticity, J Colloid Interface Sci, 312, 522, 10.1016/j.jcis.2007.03.040
Eid, 2011, A combined molecular dynamics and finite element analysis of contact and adhesion of a rough sphere and a flat surface, Tribol Trans, 54, 920, 10.1080/10402004.2011.615638
Carbone, 2004, Adhesion and friction of an elastic half-space in contact with a slightly wavy rigid surface, J Mech Phys Solids, 52, 1267, 10.1016/j.jmps.2003.12.001
Carbone, 2008, Analysis of the adhesive contact of confined layers by using a Green's function approach, J Mech Phys Solids, 56, 684, 10.1016/j.jmps.2007.05.009
Popov, 2017, Strength of adhesive contacts: influence of contact geometry and material gradients, Friction, 5, 308, 10.1007/s40544-017-0177-3
Fuller, 1975, The effect of surface roughness on the adhesion of elastic solids, Proc R Soc Lond A, 345, 327, 10.1098/rspa.1975.0138
Maugis, 1996, On the contact and adhesion of rough surfaces, J Adhes Sci Technol, 10, 161, 10.1163/156856196X00832
Chang, 1988, Adhesion model for metallic rough surfaces, J Tribol, 110, 50
Sergici, 2006, Adhesion in the contact of a spherical indenter with a layered elastic half-space, J Mech Phys Solids, 54, 1843, 10.1016/j.jmps.2006.03.005
Johnson, 1997, An adhesion map for the contact of elastic spheres, J Colloid Interface Sci, 192, 326, 10.1006/jcis.1997.4984
Yao, 2007, Adhesion maps of spheres corrected for strength limit, J Colloid Interface Sci, 315, 786, 10.1016/j.jcis.2007.07.021
Rumpf, 2012
Rabinovich, 2000, Adhesion between nanoscale rough surfaces: I. Role of asperity geometry, J Colloid Interface Sci, 232, 10, 10.1006/jcis.2000.7167
Jacobs, 2013, The effect of atomic-scale roughness on the adhesion of nanoscale asperities: a combined simulation and experimental investigation, Tribol Lett, 50, 81, 10.1007/s11249-012-0097-3
Ciavarella, 2017, A very simple estimate of adhesion of hard solids with rough surfaces based on a bearing area model, Meccanica, 53, 241, 10.1007/s11012-017-0701-6
Ciavarella, 2017, A generalized Johnson parameter for pull-off decay in the adhesion of rough surfaces, Phys Mesomech, 21, 67, 10.1134/S1029959918010095
Persson, 2001, The effect of surface roughness on the adhesion of elastic solids, J Chem Phys, 115, 5597
Persson, 2014, Theory of adhesion: role of surface roughness, J Chem Phys, 141
Persson, 2002, Adhesion between an elastic body and a randomly rough hard surface, Eur Phys J E Soft Matter Biol Phys, 8, 385, 10.1140/epje/i2002-10025-1
Yong, 2004, Atomistic studies of surface adhesions using molecular-dynamics simulations, Phil Trans Math Phys Eng Sci, 362, 1915, 10.1098/rsta.2004.1423
Deng, 2012, Adhesion-dependent negative friction coefficient on chemically modified graphite at the nanoscale, Nat Mater, 11, 1032, 10.1038/nmat3452
Pastewka, 2014, Contact between rough surfaces and a criterion for macroscopic adhesion, Proc Natl Acad Sci, 111, 3298, 10.1073/pnas.1320846111
Wu, 2006, Numerical analyses on elliptical adhesive contact, J Phys D, 39, 1899, 10.1088/0022-3727/39/9/027
Bazrafshan, 2017, Numerical method for the adhesive normal contact analysis based on a Dugdale approximation, Tribol Int, 112, 117, 10.1016/j.triboint.2017.04.001
Medina, 2014, A numerical model for the deterministic analysis of adhesive rough contacts down to the nano-scale, Int J Solid Struct, 51, 2620, 10.1016/j.ijsolstr.2014.03.033
Pohrt, 2015, Adhesive contact simulation of elastic solids using local mesh-dependent detachment criterion in boundary elements method, Facta Univ – Ser Mech Eng, 13, 3
Hulikal, 2016
Rey, 2017, Normal adhesive contact on rough surfaces: efficient algorithm for FFT-based BEM resolution, Comput Mech, 60, 69, 10.1007/s00466-017-1392-5
Ciavarella, 2016, On a recent stickiness criterion using a very simple generalization of DMT theory of adhesion, J Adhes Sci Technol, 30, 2725, 10.1080/01694243.2016.1198445
Menga, 2018, Do uniform tangential interfacial stresses enhance adhesion?, J Mech Phys Solids, 112, 145, 10.1016/j.jmps.2017.11.022
Gropper, 2016, Hydrodynamic lubrication of textured surfaces: a review of modeling techniques and key findings, Tribol Int, 94, 509, 10.1016/j.triboint.2015.10.009
Greiner, 2015, Bio-inspired scale-like surface textures and their tribological properties, Bioinspiration & biomimetics, 10, 10.1088/1748-3190/10/4/044001
Elrod, 1974, 37
Elrod, 1981, A cavitation algorithm, ASME JLubrTechnol, 103, 350
Jakobsson, 1957, vol. 190, 1
Olsson, 1957, vol. 308
Braun, 2010, Cavitation formation and modelling for fluid film bearings: a review, Proc Inst Mech Eng Part J, 224, 839, 10.1243/13506501JET772
Sahlin, 2007, Rough surface flow factors in full film lubrication based on a homogenization technique, Tribol Int, 40, 1025, 10.1016/j.triboint.2006.09.007
Patir, 1978, An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication, J Lubric Technol, 100, 12, 10.1115/1.3453103
Elrod, 1979, A general theory for laminar lubrication with Reynolds roughness, J Lubric Technol, 101, 8, 10.1115/1.3453283
Tripp, 1983, Surface roughness effects in hydrodynamic lubrication: the flow factor method, J Lubric Technol, 105, 458, 10.1115/1.3254641
Scaraggi, 2011, Lubrication in soft rough contacts: a novel homogenized approach. Part I-Theory, Soft Matter, 7, 10395, 10.1039/c1sm05128h
Miyoshi, 2001
Wornyoh, 2007, A review of dry particulate lubrication: powder and granular materials, J Tribol, 129, 438
Jang, 2005, 461, 3255
Haff, 1983, Grain flow as a fluid-mechanical phenomenon, J Fluid Mech, 134, 401, 10.1017/S0022112083003419
Lun, 1984, Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfield, J Fluid Mech, 140, 223, 10.1017/S0022112084000586
Lun, 1987, A simple kinetic theory for granular flow of rough, inelastic, spherical particles, JAppl Mech, 54, 47, 10.1115/1.3172993
Iordanoff, 2002, A review of recent approaches for modeling solid third bodies, J Tribol, 124, 725
Heshmat, 1991, The rheology and hydrodynamics of dry powder lubrication, Tribol Trans, 34, 433, 10.1080/10402009108982054
Cundall, 1979, A discrete numerical model for granular assemblies, Geotechnique, 29, 47, 10.1680/geot.1979.29.1.47
Neukirchner, 1980, Tribocorrosion and ways of prevention, Maschinenbautechnik, 29, 313
Ewen, 2018, Advances in nonequilibrium molecular dynamics simulations of lubricants and additives, Friction, 10.1007/s40544-018-0207-9
Ahn, 2014, Surface-initiated self-healing of polymers in aqueous media, Nat Mater, 13, 867, 10.1038/nmat4037
Olabisi, 2016
Bao, 2003, Cell and molecular mechanics of biological materials, Nat Mater, 2, 715, 10.1038/nmat1001
Licup, 2015, Stress controls the mechanics of collagen networks, Proc Natl Acad Sci U S A, 112, 9573, 10.1073/pnas.1504258112
Heepe, 2014, Biologically inspired mushroom-shaped adhesive microstructures, Annu Rev Mater Res, 44, 173, 10.1146/annurev-matsci-062910-100458
Marx, 2016, Elastohydrodynamic film thickness of soft EHL contacts using optical interferometry, Tribol Int, 99, 267, 10.1016/j.triboint.2016.03.020
Hutt, 2016, Soft matter dynamics: accelerated fluid squeeze-out during slip, J Chem Phys, 144
Scaraggi, 2014, Theory of viscoelastic lubrication, Tribol Int, 72, 118, 10.1016/j.triboint.2013.12.011
Putignano, 2017, Soft matter lubrication: does solid viscoelasticity matter?, ACS Appl Mater Interfaces, 9, 42287, 10.1021/acsami.7b09381
Selway, 2017, Influence of fluid viscosity and wetting on multiscale viscoelastic lubrication in soft tribological contacts, Soft Matter, 13, 1702, 10.1039/C6SM02417C
Putignano, 2016, Theory of reciprocating contact for viscoelastic solids, Phys Rev E, 93, 10.1103/PhysRevE.93.043003
Meng, 1995, Wear models and predictive equations: their form and content, Wear, 443, 181
Jacobs, 2010, On the application of transition state theory to atomic-scale wear, Tribol Lett, 39, 257, 10.1007/s11249-010-9635-z
Bhaskaran, 2010, Ultralow nanoscale wear through atom-by-atom attrition in silicon-containing diamond-like carbon, Nat Nanotechnol, 5, 181, 10.1038/nnano.2010.3
Gotsmann, 2008, Atomistic wear in a single asperity sliding contact, Phys Rev Lett, 101, 125501, 10.1103/PhysRevLett.101.125501
Shao, 2017, Multibond model of single-asperity tribochemical wear at the nanoscale, ACS Appl Mater Interfaces, 9, 35333, 10.1021/acsami.7b08023
Sato, 2012, Real-time transmission electron microscope observation of nanofriction at a single Ag asperity, Nanotechnology, 23, 505701, 10.1088/0957-4484/23/50/505701
Merkle, 2008, Liquid-like tribology of gold studied by in situ ∖TEM∖, Wear, 265, 1864, 10.1016/j.wear.2008.04.032
Vahdat, 2013, Mechanics of interaction and atomic-scale wear of amplitude modulation atomic force microscopy probes, ACS Nano, 7, 3221, 10.1021/nn305901n
Chung, 2014, Wear characteristics of atomic force microscopy tips: a review, Int J Precis Eng Manuf, 15, 2219, 10.1007/s12541-014-0584-6
De Barros Bouchet, 2015, Energy filtering transmission electron microscopy and atomistic simulations of tribo-induced hybridization change of nanocrystalline diamond coating, Carbon, 87, 317, 10.1016/j.carbon.2015.02.041
Liu, 2010, Method for characterizing nanoscale wear of atomic force microscope tips, ACS Nano, 4, 3763, 10.1021/nn100246g
Chung, 2003, Fundamental investigation of micro wear rate using an atomic force microscope, Tribol Lett, 15, 135, 10.1023/A:1024457132574
Ciavarella, 2016, On the effect of wear on asperity height distributions, and the corresponding effect in the mechanical response, Tribol Int, 101, 164, 10.1016/j.triboint.2016.04.031
de Beer, 2012, Viewpoint: surface folds make tears and chips, Physics, 5, 100, 10.1103/Physics.5.100
Filippov, 2011, Mechanism of wear and ripple formation induced by the mechanical action of an atomic force microscope tip, Phys Rev Lett, 106, 10.1103/PhysRevLett.106.025502
Sutton, 2014, A functional form for wear depth of a ball and a flat surface, Tribol Lett, 53, 173, 10.1007/s11249-013-0254-3
Singer, 1998, How third-body processes affect friction and wear, MRS Bull, 23, 37, 10.1557/S088376940003061X
Singer, 2003, Role of third bodies in friction and wear of protective coatings, J Vac Sci Technol, A Vac Surf Films, 21, S232, 10.1116/1.1599869
Molinari, 2001, Finite element modeling of dry sliding wear in metals, Eng Comput, 18, 592, 10.1108/00368790110407257
Andersson, 2011, Numerical simulation of a wear experiment, Wear, 271, 2947, 10.1016/j.wear.2011.06.018
Furustig, 2016, The measurement of wear using AFM and wear interpretation using a contact mechanics coupled wear model, Wear, 350, 74, 10.1016/j.wear.2016.01.002
Lengiewicz, 2012, Continuum framework for finite element modelling of finite wear, Comput Methods Appl Mech Eng, 205, 178, 10.1016/j.cma.2010.12.020
Lengiewicz, 2013, Efficient model of evolution of wear in quasi-steady-state sliding contacts, Wear, 303, 611, 10.1016/j.wear.2013.03.051
Dimaki, 2016, Fast high-resolution simulation of the gross slip wear of axially symmetric contacts, Tribol Trans, 59, 189, 10.1080/10402004.2015.1065529
Akchurin, 2016, A stress-criterion-based model for the prediction of the size of wear particles in boundary lubricated contacts, Tribol Lett, 64, 35, 10.1007/s11249-016-0772-x
Song, 2015, Plastic ploughing of a sinusoidal asperity on a rough surface, ASME J Appl Mech, 82, 10.1115/1.4030318
Sun, 2016, Dry frictional contact of metal asperities: a dislocation dynamics analysis, Acta Mater, 109, 162, 10.1016/j.actamat.2016.02.033
Stoyanov, 2014, Nanoscale sliding friction phenomena at the interface of diamond-like carbon and tungsten, Acta Mater, 67, 395, 10.1016/j.actamat.2013.12.029
Pastewka, 2011, Anisotropic mechanical amorphization drives wear in diamond, Nat Mater, 10, 34, 10.1038/nmat2902
von Lautz, 2016, Molecular dynamic simulation of collision-induced Third-body formation in hydrogen-free diamond-like carbon asperities, Tribol Lett, 63, 26, 10.1007/s11249-016-0712-9
Sha, 2013, Large-scale molecular dynamics simulations of wear in diamond-like carbon at the nanoscale, Appl Phys Lett, 103, 10.1063/1.4818713
Hu, 2015, Atomistic simulation of the effect of roughness on nanoscale wear, Comput Mater Sci, 102, 208, 10.1016/j.commatsci.2015.02.036
Hu, 2014, The effects of adhesive strength and load on material transfer in nanoscale wear, Comput Mater Sci, 95, 464, 10.1016/j.commatsci.2014.08.014
Li, 2015, How grain size controls friction and wear in nanocrystalline metals, PhysRevB, 92
Eder, 2011, Molecular dynamics simulations of mixed lubrication with smooth particle post-processing, J Phys Cond Matter, 23
Mishra, 2014, Plasticity-controlled friction and wear in nanocrystalline SiC, J Am Ceram Soc, 97, 1194, 10.1111/jace.12810
Pastewka, 2012, Bond order potentials for fracture, wear, and plasticity, MRS Bull, 37, 493, 10.1557/mrs.2012.94
Hu, 2017, Amorphization-assisted nanoscale wear during the running-in process, Wear, 370, 46, 10.1016/j.wear.2016.11.004
Renouf, 2011, Numerical tribology of a dry contact, Tribol Int, 44, 834, 10.1016/j.triboint.2011.02.008
Aghababaei, 2017, On the debris-level origins of adhesive wear, Proc Natl Acad Sci, 114, 7935, 10.1073/pnas.1700904114
Reye, 1860, Zur theorie der zapfenreibung, Der Civilingenieur, 4, 235
Grossiord, 1998, MoS2 single sheet lubrication by molybdenum dithiocarbamate, Tribol Int, 31, 737, 10.1016/S0301-679X(98)00094-2
De Feo, 2015, Ageing impact on tribological properties of MoDTC-containing base oil, Tribol Int, 92, 126, 10.1016/j.triboint.2015.04.014
Spikes, 2004, The history and mechanisms of ZDDP, Tribol Lett, 17, 469, 10.1023/B:TRIL.0000044495.26882.b5
Mangolini, 2012, In situ attenuated total reflection (ATR/FT-IR) tribometry: a powerful tool for investigating tribochemistry at the lubricant-substrate interface, Tribol Lett, 45, 207, 10.1007/s11249-011-9868-5
Gosvami, 2015, Mechanisms of antiwear tribofilm growth revealed in situ by single-asperity sliding contacts, Science, 348, 102, 10.1126/science.1258788
Jacobs, 2013, Nanoscale wear as a stress-assisted chemical reaction, Nat Nano, 8, 108, 10.1038/nnano.2012.255
Lahouij, 2012, Real time TEM imaging of compression and shear of single fullerene-like MoS2 nanoparticle, Tribol Lett, 45, 131, 10.1007/s11249-011-9873-8
Campen, 2015, In situ study of model organic friction modifiers using liquid cell AFM; saturated and mono-unsaturated carboxylic acids, Tribol Lett, 57, 18, 10.1007/s11249-015-0465-x
Mori, 1988, Adsorption of model compounds of lubricant on nascent surfaces of mild and stainless steels under dynamic conditions, Tribol Trans, 31, 449, 10.1080/10402008808981847
Hiratsuka, 2010, Tribocatalytic oxidation of ethylene in the rubbing of palladium against aluminum oxide, Tribol Int, 43, 1659, 10.1016/j.triboint.2010.03.014
Nakayama, 2011, Mechanism of triboplasma generation in oil, Tribol Lett, 41, 345, 10.1007/s11249-010-9712-3
Furlong, 2014, Shear and thermal effects in boundary film formation during sliding, RSC Adv, 4, 24059, 10.1039/C4RA03519D
Crobu, 2012, Effect of chain-length and countersurface on the tribochemistry of bulk zinc polyphosphate glasses, Tribol Lett, 48, 393, 10.1007/s11249-012-0034-5
Berkani, 2014, Model formation of ZDDP tribofilm from a mixture of zinc metaphosphate and goethite, Tribol Int, 79, 197, 10.1016/j.triboint.2014.06.013
Spikes, 2015, On the commonality between theoretical models for fluid and solid friction, wear and tribochemistry, Tribol Lett, 59, 1, 10.1007/s11249-015-0544-z
Park, 2004, Microscale frictional response of bovine articular cartilage from atomic force microscopy, J Biomech, 37, 1679, 10.1016/j.jbiomech.2004.02.017
Coles, 2008, In situ friction measurement on murine cartilage by atomic force microscopy, J Biomech, 41, 541, 10.1016/j.jbiomech.2007.10.013
Chan, 2010, Atomic force microscope investigation of the boundary-lubricant layer in articular cartilage, Osteoarthritis Cartilage, 18, 956, 10.1016/j.joca.2010.03.012
Gispert, 2006, Friction and wear mechanisms in hip prosthesis: comparison of joint materials behaviour in several lubricants, Wear, 260, 149, 10.1016/j.wear.2004.12.040
Ebenstein, 2004, A nanoindentation technique for functional evaluation of cartilage repair tissue, J Mater Res, 19, 273, 10.1557/jmr.2004.19.1.273
Li, 2006, Nanoindentation differentiates tissue-scale functional properties of native articular cartilage, J Biomed Mater Res, 78, 729, 10.1002/jbm.a.30751
Darling, 2010, Spatial mapping of the biomechanical properties of the pericellular matrix of articular cartilage measured in situ via atomic force microscopy, Biophys J, 98, 2848, 10.1016/j.bpj.2010.03.037
Stolz, 2004, Dynamic elastic modulus of porcine articular cartilage determined at two different levels of tissue organization by indentation-type atomic force microscopy, Biophys J, 86, 3269, 10.1016/S0006-3495(04)74375-1
Stolz, 2007, Developing scanning probe–based nanodevices—stepping out of the laboratory into the clinic, Nanomed Nanotechnol Biol Med, 3, 53, 10.1016/j.nano.2007.01.001
Ateshian, 2009, The role of interstitial fluid pressurization in articular cartilage lubrication, J Biomech, 42, 1163, 10.1016/j.jbiomech.2009.04.040
Zappone, 2008, Molecular aspects of boundary lubrication by human lubricin: effect of disulfide bonds and enzymatic digestion, Langmuir, 24, 1495, 10.1021/la702383n
Chang, 2009, Friction force microscopy of lubricin and hyaluronic acid between hydrophobic and hydrophilic surfaces, Soft Matter, 5, 3438, 10.1039/b907155e
Benz, 2004, Lubrication and wear properties of grafted polyelectrolytes, hyaluronan and hylan, measured in the surface forces apparatus, J Biomed Mater Res, 71, 6, 10.1002/jbm.a.30123
Dean, 2005, Nanoscale conformation and compressibility of cartilage aggrecan using microcontact printing and atomic force microscopy, Macromolecules, 38, 4047, 10.1021/ma047626k
Limbert, 2017, Mathematical and computational modelling of skin biophysics: a review, Proc R Soc A, 473, 10.1098/rspa.2017.0257
Burns, 2004
Silver, 2003, Mechanobiology of force transduction in dermal tissue, Skin Res Technol, 9, 3, 10.1034/j.1600-0846.2003.00358.x
Leyva-Mendivil, 2015, A mechanistic insight into the mechanical role of the stratum corneum during stretching and compression of the skin, J Mech Behav Biomed Mater, 49, 197, 10.1016/j.jmbbm.2015.05.010
Leyva-Mendivil, 2017, Implications of multi-asperity contact for shear stress distribution in the viable epidermis – an image-based finite element study, Biotribology, 11, 110, 10.1016/j.biotri.2017.04.001
Zhou, 2015, Biotribology: recent progresses and future perspectives, Biosurface Biotribology, 1, 3, 10.1016/j.bsbt.2015.03.001
Van Kuilenburg, 2013, The role of the skin microrelief in the contact behaviour of human skin: contact between the human finger and regular surface textures, Tribol Int, 65, 81, 10.1016/j.triboint.2012.11.024
Veijgen, 2013, Variables influencing the frictional behaviour of in vivo human skin, J Mech Behav Biomed Mater, 28, 448, 10.1016/j.jmbbm.2013.02.009
Adams, 2007, Friction and lubrication of human skin, Tribol Lett, 26, 239, 10.1007/s11249-007-9206-0
Gerhardt, 2008, Influence of epidermal hydration on the friction of human skin against textiles, J R Soc Interface, 5, 1317, 10.1098/rsif.2008.0034
Kwiatkowska, 2009, Friction and deformation behaviour of human skin, Wear, 267, 1264, 10.1016/j.wear.2008.12.030
Wolfram, 1983, Friction of skin, J Soc Cosmet Chem, 34, 465
Stupkiewicz, 2014, Micromechanical analysis of friction anisotropy in rough elastic contacts, Int J Solid Struct, 51, 3931, 10.1016/j.ijsolstr.2014.07.013
Leyva-Mendivil, 2018, Skin friction under pressure. The role of micromechanics, Surf Topogr Metrol Prop, 6, 10.1088/2051-672X/aaa2d4
Limbert, 2018, On skin microrelief and the emergence of expression micro-wrinkles, Soft Matter, 10.1039/C7SM01969F
Geerligs, 2011, Linear shear response of the upper skin layers, Biorheology, 48, 229, 10.3233/BIR-2011-0590
Goldstein, 1998, Skin response to repetitive mechanical stress: a new experimental model in pig, Arch Phys Med Rehabil, 79, 265, 10.1016/S0003-9993(98)90005-3
Lamers, 2013, Large amplitude oscillatory shear properties of human skin, J Mech Behav Biomed Mater, 28, 462, 10.1016/j.jmbbm.2013.01.024
Chu, 2005, Johnson-Kendall-Roberts theory applied to living cells, Phys Rev Lett, 94, 10.1103/PhysRevLett.94.028102
Li, 2012
Borodich, 2015
Kendall, 2010
Korayem, 2012, Application of Johnson-Kendall-Roberts model in nanomanipulation of biological cell: air and liquid environment, Micro Nano Lett, 7, 576, 10.1049/mnl.2012.0292
Lenarda, 2017
McCain, 2012, Cooperative coupling of cell-matrix and cell-cell adhesions in cardiac muscle, Proc Natl Acad Sci, 109, 9881, 10.1073/pnas.1203007109
Bueno-Orovio, 2008, Minimal model for human ventricular action potentials in tissue, J Theor Biol, 253, 544, 10.1016/j.jtbi.2008.03.029
Hurtado, 2016, Computational modeling of non-linear diffusion in cardiac electrophysiology: a novel porous-medium approach, Comput Methods Appl Mech Eng, 300, 70, 10.1016/j.cma.2015.11.014
Ambrosi, 2011, Electromechanical coupling in cardiac dynamics: the active strain approach, SIAM J Appl Math, 71, 605, 10.1137/100788379
Wong, 2013, Computational modeling of chemo- electro- mechanical coupling: a novel implicit monolithic finite element approach, Int J Numer Meth Biomed Eng, 29, 1104, 10.1002/cnm.2565
Ruiz-Baier, 2014, Mathematical modelling of active contraction in isolated cardiomyocytes, Math Med Biol, 31, 259, 10.1093/imammb/dqt009
Paggi, 2016
Paggi, 2011, Contact conductance of rough surfaces composed of modified RMD patches, Int J Heat Mass Tranfer, 54, 4664, 10.1016/j.ijheatmasstransfer.2011.06.011
Hol, 2011, Advanced friction modeling in sheet metal forming, Key Eng Mat, 473, 715, 10.4028/www.scientific.net/KEM.473.715
Ewen, 2017, Nonequilibrium molecular dynamics simulations of stearic acid adsorbed on iron surfaces with nanoscale roughness, Tribol Int, 107, 264, 10.1016/j.triboint.2016.11.039
Tadmor, 1996, Quasicontinuum analysis of defects in solids, Philos Mag A, 73, 1529, 10.1080/01418619608243000
Smith, 2016