Model validation hierarchies for connecting system design to modeling and simulation capabilities

1998 Oberkampf, 2002, Verification and validation in computational fluid dynamics, Prog. Aero. Sci., 38, 209, 10.1016/S0376-0421(02)00005-2 2006 2019 Oberkampf, 2010 Bagdatli, 2022, System-level identification of critical uncertainties to enable validation experiments Mauery T, Alonso J, Cary A, Lee V, Malecki R, Mavriplis D, et al. A Guide for Aircraft Certification by Analysis. NASA-CR-20210015404. NASA; 20211.. Shaw, 2021 1994 Roache, 1998 Bradley, 1988, CFD validation philosophy Marvin, 1988, Accuracy requirements and benchmark experiements for CFD validation Oberkampf, 2001, What are validation experiments, Exp. Tech., 25, 35, 10.1111/j.1747-1567.2001.tb00023.x 2016 Rumsey, 2016, The NASA juncture flow experiment: goals, progress and preliminary testing Kegerise, 2019, An experimental investigation of a wing-fuselage junction model in the NASA Langley 14- by 22-foot subsonic wind tunnel Office of the Deputy Assistant Secretary Boyack, 1990, Quantifying reactor safety margins Part 1: an overview of the code scaling, applicability, and uncertainty evaluation methodology, Nucl. Eng. Des., 119, 1, 10.1016/0029-5493(90)90071-5 2005, Transient and accident analysis methods, Regulatory Guide 1, 203 Lin, 1992, Development of evaluation criteria and a procedure for assessing predictive capability and code performance, vol. 3174, 154 1992, Advanced earth-to-orbit propulsion technology Sindir, 1996 Sindir, 1997 Marvin, 1995, Perspective on computational fluid dynamics validation, AIAA J., 33, 1778, 10.2514/3.12727 Price, 2006, An integrated systems engineering approach to aircraft design, Prog. Aero. Sci., 42, 331, 10.1016/j.paerosci.2006.11.002 Groesser, 2012, Contributions to model validation: hierarchy, process, and cessation, Syst. Dynam. Rev., 28, 157, 10.1002/sdr.1466 Richardson, 1981 Hills, 2013 Jatale, 2017, Multiscale validation and uncertainty quantification for problems with sparse data, Journal of Verification, Validation, and Uncertainty Quantification, 2, 10.1115/1.4035864 Sohier, 2021, Improving simulation specification with MBSE for better simulation validation and reuse, Syst. Eng., 24, 383, 10.1002/sys.21594 Zimmerman, 2019, Digital engineering transformation across the department of defense, Journal of Defense Modeling and Simulation, 16, 325, 10.1177/1548512917747050 Bone, 2019, Transforming systems engineering through digital engineering, Journal of Defense Modeling and Simulation, 16, 339, 10.1177/1548512917751873 Hale, 2017 Curran, 2018, Sensitivity analysis methods for mitigating uncertainty in engineering system design, Syst. Eng., 21, 191, 10.1002/sys.21422 Hybertson, 2018, Evidence-based systems engineering, Syst. Eng., 21, 243, 10.1002/sys.21427 Luckring, 2023 Pearcey, 1961, Shock-induced separation and its prevention by design and boundary layer control, vol. 2, 1166 Delery, 1985, Shock wave/turbulent boundary layer interaction and its control, Prog. Aero. Sci., 22, 209, 10.1016/0376-0421(85)90001-6 Panaras, 1996, Review of the physics of swept-shock/boundary layer interactions, Prog. Aero. Sci., 32, 173, 10.1016/0376-0421(95)00005-4 2011 Stanbrook, 1964, Possible types of flow at swept leading edges, Aeronaut. Q., 15, 72, 10.1017/S0001925900003024 Squire, 1976, Flow regimes over delta wings of supersonic and hypersonic speeds, Aeronaut. Q., 27, 1, 10.1017/S0001925900007502 Miller, 1984, Leeside flows over delta wings at supersonic speeds, AIAA Journal of Aircraft, 21, 680, 10.2514/3.45014 Brodetsky, 2001, Evolution of vortex structures on the leeward side of a delta wing, J. Appl. Mech. Tech. Phys., 42, 243, 10.1023/A:1018819717933