Model study of the effect of bird’s nest on transport phenomena in the raceway of an ironmaking blast furnace

ANSYS-CFX-Documentation. Burgess, 1985, Fuel combustion in the blast-furnace raceway zone, Prog. Energy Combust. Sci., 11, 61, 10.1016/0360-1285(85)90013-9 Chung, 1997, Tuyere level coke characteristics in blast furnace with pulverized coal injection, ISIJ Int., 37, 119, 10.2355/isijinternational.37.119 Dong, 2004, Gas-powder flow and powder accumulation in a packed bed II: Numerical study, Powder Technol., 149, 10, 10.1016/j.powtec.2004.09.039 Dong, 2007, Investigating the fate of injectant coal in blast furnaces by size-exclusion chromatography, Energy Fuels, 21, 1062, 10.1021/ef060472k Feng, 2003, Numerical study of gas–solid flow in the raceway of a blast furnace, Steel Res. Int., 74, 523, 10.1002/srin.200300229 Field, 1967 Goto, 2002, Massive combustion technology of solid fuel injected into blast furnace Hao, 2005, A blast furnace prediction model combining neural network with partial least square regression, Steel Res. Int., 76, 694, 10.1002/srin.200506080 Helle, 2009, Assessment of the state of the blast furnace high temperature region by Tuyere core drilling, ISIJ Int., 49, 203, 10.2355/isijinternational.49.203 Ho, 2009, Experimental and numerical investigations of gouge formation related to blast furnace burden distribution, Miner. Eng., 22, 986, 10.1016/j.mineng.2009.03.004 Ishii, 2000 Jamaluddin, 1986, Combustion of pulverised coal as a tuyere-injectant to the blast furnace, 575 Jamaluddin, 1986, Mathematical-modeling of combustion in blast-furnace raceways, including injection of pulverized coal, Ironmaking Steelmaking, 13, 91 Kanbara, 1977, Dissection of blast-furnaces and their internal state, Trans. Iron Steel Inst. Japan, 17, 371, 10.2355/isijinternational1966.17.371 Kunitomo, 2004, Effects of volatile matter of pulverized coal on reducing agents rate of blast furnace and combustion behavior of coal mixture, Tetsu to Hagane, 90, 8, 10.2355/tetsutohagane1955.90.4_190 Magnussen, 1977, On mathematical modelling of turbulent combustion with special emphasis on soot formation and combustion, 719 Mathieson, 2005, Toward an understanding of coal combustion in blast furnace tuyere injection, Fuel, 84, 1229, 10.1016/j.fuel.2004.06.036 Nakajima, 1990, Behavior of coke degradation in a blast furnace, NKK Techn. Rev., 60, 1 Nightingale, 2000, Developments in blast furnace process control at Port Kembla based on process fundamentals, Metall. Mater. Trans. B-Process Metall. Mater. Process. Sci., 31, 993, 10.1007/s11663-000-0075-2 Nogami, 2004, Raceway design for the innovative blast furnace, ISIJ Int., 44, 2150, 10.2355/isijinternational.44.2150 Rangarajan, 2013, Influence of operating parameters on raceway properties in a model blast furnace using two-fluid model, Ind. Eng. Chem. Res. Rogers, H., 2004. PCI combustion tests. In: Internal BlueScope Steel Report. Shen, 2006, Proper MgO addition in blast furnace operation, ISIJ Int., 46, 65, 10.2355/isijinternational.46.65 Shen, 2008, Industrial practice of BiPCI process of pulverized coal injection for blast furnace ironmaking at SSAB, Steel Res. Int., 79, 11, 10.1002/srin.200806310 Shen, 2008, Three-dimensional modelling of coal combustion in blast furnace, ISIJ Int., 48, 777, 10.2355/isijinternational.48.777 Shen, 2009, Modelling in-furnace phenomena of coal/coke combustion in a blast furnace: effects of coal properties, J. Iron. Steel Res. Int., 16, 1137 Shen, 2009, Model study of the effects of coal properties and blast conditions on pulverized coal combustion, ISIJ Int., 49, 819, 10.2355/isijinternational.49.819 Shen, 2009, A three-dimensional numerical study of the combustion of coal blends in blast furnace, Fuel, 88, 255, 10.1016/j.fuel.2008.08.013 Shen, 2009, Computational fluid dynamics study of pulverized coal combustion in blast furnace raceway, Ind. Eng. Chem. Res., 48, 10314, 10.1021/ie900853d Shen, 2010, An integrated model of coal/coke combustion in a blast furnace, 822 Shen, 2011, Three-dimensional modelling of in-furnace coal/coke combustion in a blast furnace, Fuel, 90, 728, 10.1016/j.fuel.2010.08.030 Shen, 2012, CFD study of in-furnace phenomena of pulverised coal injection in blast furnace: effects of operating conditions, Powder Technol., 223, 27, 10.1016/j.powtec.2011.07.020 Shen, 2012, Modelling in-furnace phenomena of pulverized coal injection in ironmaking blast furnace: effect of coke bed porosities, Miner. Eng., 33, 54, 10.1016/j.mineng.2011.10.014 Truelove, J.S., Holcombe, D., 1991. Measurement and modelling of coal flame stability in a pilot-scale combustor. In: Symposium (International) on Combustion, vol. 23(1), pp. 963–971. Ubhayakar, 1976, Rapid devolatilization of pulverized coal in hot combustion gases, 427 Willmers, 1992, Coke properties in the bosh and raceway regions of the blast furnace, Rev. Metal.-Cahiers Inform. Techn., 89, 241