Model Predictive Based Direct Power Control Method Using Switching State Preference for Independent Phase Loss Decrease of Three-Phase Pulsewidth Modulation (PWM) Rectifiers
Tóm tắt
Nowadays, active rectifiers are increasingly used, particularly in grid-connected applications. The high efficiency and reliability of active rectifiers become crucial for increasing the system performance. Due to the lack of model predictive control methods considering the different aging levels among phase legs of rectifiers, this paper thus introduces a direct power control-based model predictive control for independent loss reduction in each phase of the active rectifier. Different from conventional techniques, the target of proposed model predictive direct power control scheme is lowering switching loss in the leg having highest aging level of active rectifier, resulting in increasing its corresponding lifetime and lifetime of entire rectifier. As opposed to the model predictive control method based on incorporating additional terms regarding switching loss in the cost function, a switching state preselection strategy is proposed in this study to determine clamping region and corresponding preselected switching state for the leg having highest aging level of active rectifier. The use of the proposed method lowers thermal stress in the leg having highest aging level and increases lifetime of active rectifier. Simulation and experimental results for the proposed technique are presented and compared with conventional model predictive direct power control method to validate the accuracy and feasibility of the proposed method.
Từ khóa
#Active rectifier #predictive control #direct power control #per-phase #lifetimeTài liệu tham khảo
10.1109/TIE.2004.841149
10.1109/TPEL.2013.2258472
10.1109/TIE.2011.2114313
10.1109/TPEL.2010.2040852
10.1109/63.654960
10.1109/TPEL.2013.2294933
10.1109/TIA.2022.3160126
10.1109/41.767058
10.1109/TIE.2007.896554
10.1002/9781119941446.ch6
10.1109/ACCESS.2018.2846770
10.1109/ACCESS.2019.2956096
10.1109/TPEL.2008.2002065
10.1109/TIE.2014.2352214
10.1109/TIE.2008.2007519
10.1109/PRECEDE.2017.8071278
10.1109/TIE.2016.2547874
10.1109/TPEL.2016.2612832
10.1109/TII.2014.2363761
10.1007/s42835-023-01604-x
10.1109/ACCESS.2023.3294995
10.1109/ACCESS.2023.3302924
10.1002/9781119941446.ch10
10.1109/TIE.2021.3139177
10.1109/JESTPE.2022.3168655
10.1016/j.ijepes.2022.108244
10.1109/TTE.2022.3199431
10.1109/TIE.2012.2196894
10.1109/TPEL.2021.3070698
10.1109/EPE.2015.7309265
10.1109/MPEL.2018.2849653
10.1109/APEC.2014.6803662
10.1109/TIE.2015.2497665
10.1109/TPEL.2023.3278675
2023, TI Designs: TIDM-1000
2014, Appl. Note AND9140/D
2021, SEMIKRON SKM75GB07E3 Datasheet