Mode shape degeneration in linear rotor dynamics for turbocharger systems
Tóm tắt
The modelling and simulation process of high-speed rotor dynamics is a rather essential task that should accompany the virtual prototype development of exhaust gas turbochargers. The system’s nonlinear nature originates primarily in the oil-film concentrated in the journal bearings, which relates to the associated gyroscopic forward and backward modes. This study focuses on linear rotor dynamics and the impact of the bearing stiffness variation on the shape alternation of gyroscopic modes, which cannot be observed in the typical critical speed maps or Campbell diagrams. The mode degeneration is investigated with the help of the modal assurance criterion according to two principles: first, quantify the shape alternation of the associated modes on the basis of the average bearing stiffness from literature, and second, compare the consecutive modes against each other, either forward or backward. The latter reveals that the aforementioned degeneration leads to a jump with respect to the mode shape into the next occurring mode although it is still being registered as a system whirl that belongs to the previous natural frequency. The investigation is extended over a wide range of turbocharger frame sizes demonstrating that both the mode degeneration and jump occur independently of the assembly dimensions, thus offering an alternative insight on the possible form of the occurring rotor-bearing oscillations arising from motor excitation, aero-loads or self-excited vibrations due to oil-whirl.
Tài liệu tham khảo
Allemang, R.J.: Investigation of some multiple input/output frequency response function experimental modal analysis techniques. Ph.D. thesis, University of Cincinnati (1980)
Allemang, R.J., Brown, D.L.: A correlation coefficient for modal vector analysis. In: International Modal Analysis Conference, pp. 110–116 (1982)
Batchelor, G.K.: An Introduction to Fluid Dynamics. Cambridge University Press, Cambridge (1967)
Butenschön, H.J.: Das hydrodynamische, zylindrische Gleitlager endlicher Breite unter instationärer Belastungen. Ph.D. thesis, TH Karlsruhe (1976)
Chatzisavvas, I., Boyaci, A., Koutsovasilis, P., Schweizer, B.: Influence of the oil temperature of thrust bearings on the vibratory behavior of small turbochargers. In: International Conference on Engineering Vibration (2015)
Chatzisavvas, I., Boyaci, A., Koutsovasilis, P., Schweizer, B.: Influence of hydrodynamic thrust bearings on the nonlinear oscillations of high-speed rotors. J. Sound Vib. 380, 224 (2016)
Chatzisavvas, I., Boyaci, A., Lehn, A., Mahner, M., Koutsovasilis, P., Schweizer, B.: On the influence of thrust bearings on the nonlinear rotor vibrations of turbochargers. In: ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition (2016)
Chen, W.J., Gunter, E.J.: Introduction to Dynamics of Rotor-Bearing Systems. Trafford Publishing, Victoria (2005)
Childs, D.: Turbomachinery Rotordynamics: Phenomena, Modeling, and Analysis. Wiley, New York (1993)
Driot, N., Lamarque, C.-H., Berlioz, A.: Theoretical and experimental analysis of a base-excited rotor. J. Comput. Nonlinear Dyn. 1(3), 257 (2006)
Duchemin, M., Berlioz, A., Ferraris, G.: Dynamic behavior and stability of a rotor under base excitation. J. Vib. Acoust. 128(5), 576–585 (2006)
Friswell, M.I., Garvey, S.D., Penny, J.E.T.: Computing critical speeds for rotating machines with speed-dependent bearing properties. J. Sound Vib. 169, 139–158 (1998b)
Friswell, M.I., Penny, J.E.T., Garvey, S.D., Lees, A.W.: Dynamics of rotating machines. http://www.rotordynamics.info/ (2010)
Friswell, M.I., Penny, J.E.T., Garvey, S.D., Lees, A.W.: Dynamics of Rotating Machines. Cambridge University Press, Cambridge (2012)
Gasch, R., Nordmann, R., Pfützner, H.: Rotordynamik, 2nd edn. Springer, Berlin (2001)
Gugau, M., Winkler, F., Weiske, S., Heuer, T., Sauerstein, R.: The next generation of pulse optimized multi-scroll turbines for automotive applications: dualVolute and TwinScroll. In: 12th International Conference on Turbochargers and Turbocharging (2016)
Hahn, K.: Dynamik-simulation von Wälzlagerkäfigen. Ph.D. thesis, Technische Universität Kaiserslautern (2004)
Kim, H.S.: Stability analysis of a turbine rotor system with alford forces. J. Sound Vib. 258(4), 777–790 (2002)
Koutsovasilis, P., Driot, N., Daixing, L., Schweizer, B.: Quantification of sub-synchronous vibrations for turbocharger rotors with full-floating ring bearings. Arch. Appl. Mech. 85(4), 481–502 (2015)
Nguyen-Schäfer, H.: Rotordynamics of Automotive Turbochargers: Linear and Nonlinear Rotordynamics–Bearing Design–Rotor Balancing. Springer, Berlin (2012)
Pinkus, O., Sternlicht, B.: Theory of Hydrodynamic Lubrication. McGraw-Hill, New York (1961)
Schweizer, B.: Total instability of turbocharger rotors-physical explanation of the dynamic failure of rotors with full-floating ring bearings. J. Sound Vib. 328, 156–190 (2009)
Schweizer, B.: Vibrations and bifurcations of turbocharger rotors. In: SIRM 2009: 8th International Conference on Vibrations in Rotating Machines (2009)
Schweizer, B.: Dynamics and stability of automotive turbochargers. Arch. Appl. Mech. 80(9), 1017–1043 (2010)
Schweizer, B., Sievert, M.: Nonlinear oscillations of automotive turbocharger turbines. J. Sound Vib. 321, 955975 (2009)
Singh, R., Lim, T.C.: Vibration transmission through rolling element bearings in geared rotor systems. NASA Contractor Report 90-C-019, Ohio State University, Columbus, Ohio (1990)
Spearot, J.A.: High-Temperature, High-Shear (HTHS) Oil Viscosity: Measurement and Relationship to Engine Operation: ASTM Special Technical Publication, vol. 1068. ASTM International, West Conshohocken (1989)
Szeri, A.Z.: Fluid Film Lubrication: Theory and Design. Cambridge University Press, Cambridge (2005)
Teutsch, R.: Kontaktmodelle und Strategien zur Simulation von Wälzlagern und Wälzführungen. Ph.D. thesis, Technische Universität Kaiserslautern (2004)
Vance, J.M.: Rotordynamics of Turbomachinery. Wiley, New York (1988)
Wensing, J.A.: On the Dynamics of Ball Bearings. Ph.D. thesis, University of Twente, Enschede, The Netherlands (1998)
Yoon, S.Y., Lin, Z., Allaire, P.E.: Control of Surge in Centrifugal Compressors by Active Magnetic Bearings. Springer, London (2013)
Zienkiewicz, O.C., Taylor, R.L., Zhu, J.Z.: The Finite Element Method, 6th edn. Elsevier Butterworth-Heinemann, Oxford (2005)