Mitigating cutting-induced plasticity in the contour method. Part 2: Numerical analysis

Abaqus User's Manual, Version 6.9. SIMULIA, 2008. p.Abaqus User's Manual, Version 6.9.

Bueckner, 1973, Field Singularities and Related Integral Representations, 239

Dennis, 2008, Assessment of the influence of plasticity and constraint on measured residual stresses using the contour method, PVP2012, vol. PVP2008-61490

Frankel, 2012, Residual stress fields after FOD impact on flat and aerofoil-shaped leading edges, Mech. Mater., 55, 130, 10.1016/j.mechmat.2012.08.007

Hacini, 2009, Evaluation of residual stresses induced by robotized hammer peening by the contour method, Exp. Mech., 49, 775, 10.1007/s11340-008-9205-6

Hill, 2013, The slitting method, 89

Hosseinzadeh, 2012, Mapping multiple components of the residual stress tensor in a large p91 steel pipe girth weld using a single contour cut, Exp. Mech., 53, 171, 10.1007/s11340-012-9627-z

Hosseinzadeh, 2012, Slitting and contour method residual stress measurements in an edge welded beam, J. Press. Vessel Technol., 134, 011402, 10.1115/1.4004626

Hosseinzadeh, 2014, Towards good practice guidelines for the contour method of residual stress measurement, J. Eng., 1

Hosseinzadeh, F., Traore, Y., Bouchard, P.J., Muránsky, O. Mitigating cutting-induced plasticity in the contour method: Exp. (Part 1), Part 1 present study (2015).

Hutchings, 2005

Kelleher, 2003, The measurement of residual stress in railway rails by diffraction and other methods, J. Neutron Res., 11, 187, 10.1080/10238160410001726602

Liu, 2014, Internal residual stress measurement on inertia friction welding of nickel-based superalloy, Sci. Technol. Weld. Join., 19, 408, 10.1179/1362171814Y.0000000206

Muránsky, 2011, Validated numerical analysis of residual stresses in Safety Relief Valve (SRV) nozzle mock-ups, Comput. Mater. Sci., 50, 2203, 10.1016/j.commatsci.2011.02.031

Muránsky, 2012, Comprehensive numerical analysis of a three-pass bead-in-slot weld and its critical validation using neutron and synchrotron diffraction residual stress measurements, Int. J. Solids Struct., 49, 1045, 10.1016/j.ijsolstr.2011.07.006

Muránsky, 2012, The effect of plasticity theory on predicted residual stress fields in numerical weld analyses, Comput. Mater. Sci., 54, 125, 10.1016/j.commatsci.2011.10.026

Pagliaro, 2011, Measuring inaccessible residual stresses using multiple methods and superposition, Exp. Mech., 51, 1123, 10.1007/s11340-010-9424-5

Prime, 2013, The Contour Method, 109

Prime, 2010, The contour method cutting assumption: error minimization and correction

Prime, 2004, Laser surface-contouring and spline data-smoothing for residual stress measurement, Exp. Mech., 44, 176, 10.1007/BF02428177

Prime, 2001, Cross-sectional mapping of residual stresses by measuring the surface contour after a cut, J. Eng. Mater. Technol., 162, 10.1115/1.1345526

Schajer, 2013

Shin, 2005, FEM analysis of plasticity-induced error on measurement of welding residual stress by the contour method, J. Mech. Sci. Technol. (KSME Int. J.), 19, 1885, 10.1007/BF02984267

Simoneau, 2009, A comparison of residual stress in hammer-peened, multi-pass steel welds – A514 (S690Q) and S4150, Weld. World, 53, R124, 10.1007/BF03266717

Traore, 2013, Measurement of the residual stress tensor in a compact tension weld specimen, Exp. Mech., 53, 605, 10.1007/s11340-012-9672-7

Woo, 2014, Through-thickness distributions of residual stresses in an 80mm thick weld using neutron diffraction and contour method, J. Mater. Sci., 50, 784, 10.1007/s10853-014-8638-9