Minimization of total drying costs for a continuous packed-bed biomass dryer operating at an integrated chemical pulp and paper mill

Holmberg, 2007 Bhattacharya, 2013, Effects of supplementary biomass firing on the performance of combined cycle power generation: a comparison between NGCC and IGCC plants, Biomass Bioenergy, 54, 239, 10.1016/j.biombioe.2013.04.008 Ståhl, 1998, IGCC power plant for biomass utilization Värnamo, Sweden, Biomass Bioenergy, 15, 205, 10.1016/S0961-9534(98)00025-7 Isaksson, 2013, Influence on dryer type on the performance of a biomass gasification combined cycle co-located with an integrated pulp and paper mill, Biomass Bioenergy, 59, 336, 10.1016/j.biombioe.2013.10.002 Tock, 2010, Thermochemical production of liquid fuels from biomass: thermo-economic modeling, process design and process integration analysis, Biomass Bioenergy, 34, 1838, 10.1016/j.biombioe.2010.07.018 Gassner, 2009, Thermo-economic process model for thermochemical production of synthetic natural gas (SNG) from lignocellulosic biomass, Biomass Bioenergy, 33, 1587, 10.1016/j.biombioe.2009.08.004 Arvidsson, 2012, Integration opportunities for substitute natural gas (SNG) production in an industrial process site, vol. 29, 331 Raiko, 2003, Development and optimization of power plant concepts for local wet fuels, Biomass Bioenergy, 24, 27, 10.1016/S0961-9534(02)00090-9 Björk, 2002, A method for life cycle assessment environmental optimisation of a dynamic process exemplified by an analysis of an energy system with a superheated steam dryer integrated in a local district heat and power plant, Chem Eng J, 87, 381, 10.1016/S1385-8947(02)00017-7 Holmberg, 2005, Optimization of the bark drying process in combined heat and power plant process of a pulp and paper mill Brammer, 2002, The influence of feedstock drying on the performance and economics of a biomass gasifier–engine CHP system, Biomass Bioenergy, 22, 271, 10.1016/S0961-9534(02)00003-X Pang, 2010, Drying of woody biomass for bioenergy: drying technologies and optimization for an integrated bioenergy plant, Dry Technol, 28, 690, 10.1080/07373931003799236 Atuonwu, 2011, Improving adsorption dryer energy efficiency by simultaneous optimization and heat integration, Dry Technol, 29, 1459, 10.1080/07373937.2011.591516 Kiranoudis, 1995, Design and production planning for multiproduction dehydration plants, Comput Chem Eng, 19, 581, 10.1016/0098-1354(94)00069-7 Kiranoudis, 2000, Pareto design of conveyor-belt dryers, J Food Eng, 46, 145, 10.1016/S0260-8774(00)00060-1 Teeboonma, 2003, Optimization of heat pump fruit dryers, J Food Eng, 59, 369, 10.1016/S0260-8774(02)00496-X Pang, 2010, Drying of woody biomass for bioenergy using packed moving bed dryer: mathematical modeling and optimization, Dry Technol, 28, 702, 10.1080/07373931003799251 Keey, 1972, vol. 13 Holmberg, 2011, Experimental study on drying of bark in a fixed beds, Dry Technol, 29, 953, 10.1080/07373937.2010.551305 Johansson, 2004 Shenoy, 1995 Roetzel, 2010, Typical values of overall heat transfer coefficients, 75