Minimization of energy consumption in multiple stage evaporator using Genetic Algorithm

Sustainable Computing: Informatics and Systems - Tập 20 - Trang 130-140 - 2018
Om Prakash Verma1, Gaurav Manik2, Suryakant2, Vinay Kumar Jain3, Deepak Kumar Jain4, Haoxiang Wang5,6
1School of Electronics, KIIT University Bhubaneswar, Odisha, India
2Department of Polymer and Process Engineering, Indian Institute of Technology Roorkee, Uttarakhand, India
3Department of Computer Science and Engineering, JUET, Raghogarh, M.P., India
4Institute of Automation, Chinese Academy of Sciences, Beijing, China
5Department of ECE, Cornell University, NY, USA
6R&D Center, GoPerception Laboratory, NY, USA

Tài liệu tham khảo

International Panel on Climate Change (IPCC), Climate Change 2014 Synthesis Report Summary Chapter for Policymakers, 5th Assess. Rep. (2014) 31. 10.1017/CBO9781107415324. World Resources Institute, 2008, The network for climate and energy information renewable energy in China: an overview, Renew. Energy, 1 U.S. Energy Information Administration, 2016 Huang, 2010, Process modeling and analysis of pulp mill-based integrated biorefinery with hemicellulose pre-extraction for ethanol production: a comparative study, Bioresour. Technol., 101, 624, 10.1016/j.biortech.2009.07.092 da Silva, 2009, An integrated process to produce vanillin and lignin-based polyurethanes from Kraft lignin, Chem. Eng. Res. Des., 87, 1276, 10.1016/j.cherd.2009.05.008 Demirbaş, 2002, Pyrolysis and steam gasification processes of black liquor, Energy Convers. Manage., 43, 877, 10.1016/S0196-8904(01)00087-5 Cardoso, 2009, Chemical composition and physical properties of black liquors and their effects on liquor recovery operation in Brazilian pulp mills, Fuel, 88, 756, 10.1016/j.fuel.2008.10.016 Cardoso, 2009, Chemical process simulation for minimizing energy consumption in pulp mills, Appl. Energy, 86, 45, 10.1016/j.apenergy.2008.03.021 Naqvi, 2012, Bio-refinery system in a pulp mill for methanol production with comparison of pressurized black liquor gasification and dry gasification using direct causticization, Appl. Energy, 90, 24, 10.1016/j.apenergy.2010.12.074 T. Ekbom, M. Lindblom, N. Berglin, P. Ahlvik, Technical and Commercial Feasibility Methanol/DME Production as Motor Fuels for Automotive Uses—BLGMF, Nykomb Synergetics AB, Chemrec, Volvo, Ecotraffic, OKQ8, STFi, Progr. Rep. (2003) 1–298. Contract No. 4.1013/Z/01-087/2001. T. Johnson, B. Johnson, K. Mukherjee, A. Hall, India—an emerging giant in the pulp and paper industry, 65th Appita Annu. Conf. Exhib. Rotorua New Zeal. 10-13 April 2011 Conf. Tech. Pap. (2011) 135. http://webcache.googleusercontent.com/search?q=cache:4wppefVmJTkJ:becaamec.co.nz/media/∼/media/beca_amec/media/technical_papers/india_emerging_giant_pulp_paper_industry.ashx+&cd=5&hl=en&ct=clnk&gl=in. Technology Compendium On Energy saving Opportunities Pulp & Paper Sector (2013). Verma, 2016, Solution of SNLAE model of backward feed multiple effect evaporator system using genetic algorithm approach, Int. J. Syst. Assur. Eng. Manage., 1 Laurijssen, 2012, Energy conversion strategies in the European paper industry—a case study in three countries, Appl. Energy, 98, 102, 10.1016/j.apenergy.2012.03.001 K. Schumacher, J. Sathaye, Ernest O Rlando Lawrence, India’s Pulp and Paper Industry: Productivity and Energy Efficiency, Contract (1999). Jyoti, 2014, Simulation of heat integrated multiple effect evaporator system, Int. J. Therm. Sci., 76, 110, 10.1016/j.ijthermalsci.2013.08.016 Gielen, 2009, Indicators for industrial energy efficiency in India, Energy, 34, 962, 10.1016/j.energy.2008.11.008 Verma, 2017, Minimization of energy consumption in multi-stage evaporator system of Kraft recovery process using Interior-Point Method, Energy, 129, 148, 10.1016/j.energy.2017.04.093 1996, Handbook of Pulping and Papermaking Kumar, 2013, Modeling and dynamic simulation of mixed feed multi-effect evaporators in paper industry, Appl. Math. Model., 37, 384, 10.1016/j.apm.2012.02.039 El-Dessouky, 1999, Multiple-effect evaporation desalination systems: thermal analysis, Desalination, 125, 259, 10.1016/S0011-9164(99)00147-2 Sharma, 2005, Performance model for a horizontal tube falling film evaporator, Int. J. Green Energy, 2, 109, 10.1081/GE-200051315 Bhargava, 2008, Selection of optimal feed flow sequence for a multiple effect evaporator system, Comput. Chem. Eng., 32, 2203, 10.1016/j.compchemeng.2007.10.012 Khanam, 2010, Placement of condensate flash tanks in multiple effect evaporator system, Desalination, 262, 64, 10.1016/j.desal.2010.05.043 Wu, 2012, An investigation on the exergo-economic performance of an evaporator in orc recovering low-grade waste heat, Int. J. Green Energy, 9, 780, 10.1080/15435075.2011.641191 Xevgenos, 2015, Design of an innovative vacuum evaporator system for brine concentration assisted by software tool simulation, Desalin. Water Treat., 53, 3407, 10.1080/19443994.2014.948660 Ding, 2009, Evaporator modeling—a hybrid approach, Appl. Energy, 86, 81, 10.1016/j.apenergy.2008.04.005 Oh, 2014, Modeling and analysis of a syngas cooler with concentric evaporator channels in a coal gasification process, Korean J. Chem. Eng., 31, 2136, 10.1007/s11814-014-0164-6 Verma, 2015, Analysis of hybrid temperature control for nonlinear continuous stirred tank reactor, vol. 2, 103 Kaya, 2007, Mathematical modeling of multiple-effect evaporators and energy economy, Energy, 32, 1536, 10.1016/j.energy.2006.09.002 Khanam, 2010, Energy reduction schemes for multiple effect evaporator systems, Appl. Energy, 87, 1102, 10.1016/j.apenergy.2009.05.003 Verma, 2016, Optimization of steam economy and consumption of heptad’s effect evaporator system in Kraft recovery process, Int. J. Syst. Assur. Eng. Manage., 1 Karlsson, 2011, The MIND method: a decision support for optimization of industrial energy systems—principles and case studies, Appl. Energy, 88, 577, 10.1016/j.apenergy.2010.08.021 Srivastava, 2013, Modeling and simulation of mee system used in the sugar industry, Chem. Eng. Commun., 200, 1089, 10.1080/00986445.2012.737876 Lambert, 1987, Design calculations for multiple-effect evaporators. 1. Linear method, Ind. Eng. Chem. Res., 26, 100, 10.1021/ie00061a019 Gautami, 2012, Selection of optimum configuration for multiple effect evaporator system, Desalination, 288, 16, 10.1016/j.desal.2011.12.005 Khademi, 2009, Simulation and optimization of a six-effect evaporator in a desalination process, Chem. Eng. Process. Process Intensif., 48, 339, 10.1016/j.cep.2008.04.013 Sharan, 2017, Energy integration of multiple-effect evaporator, thermo-vapor compressor, and background process, J. Clean. Prod., 164, 1192, 10.1016/j.jclepro.2017.07.041 Palacios-Bereche, 2014, Mechanical vapour recompression incorporated to the ethanol production from sugarcane and thermal integration to the overall process applying pinch analysis, Chem. Eng. Trans., 39, 397 Khanam, 2011, Development of a new model for multiple effect evaporator system, Comput. Chem. Eng., 35, 1983, 10.1016/j.compchemeng.2010.11.001 Sogut, 2010, Energetic and exergetic performance evaluation of the quadruple-effect evaporator unit in tomato paste production, Energy, 35, 3821, 10.1016/j.energy.2010.05.035 Sharan, 2016, Energy integration of multiple effect evaporators with background process and appropriate temperature selection, Ind. Eng. Chem. Res., 55, 1630, 10.1021/acs.iecr.5b03516 Pourrajabian, 2013, Applying genetic algorithms for solving nonlinear algebraic equations, Appl. Math. Comput., 219, 11483 Singh, 1995, Axisymmetric vibration of a circular plate with double linear variable thickness, J. Sound Vib., 179, 879, 10.1006/jsvi.1995.0059 Abraham, 2006 Grosan, 2008, A new approach for solving nonlinear equations systems, Syst. Man Cybern. Part A Syst. Hum. IEEE Trans., 38, 698, 10.1109/TSMCA.2008.918599 Verma, 2017, Simulation and control of a complex nonlinear dynamic behavior of multi-stage evaporator using PID and Fuzzy-PID controllers, J. Comput. Sci. Verma, 2017, Modeling, simulation and control of the dynamics of a Heptads’ effect evaporator system used in the Kraft recovery processes, Trans. Inst. Meas. Control. Verma, 2016, Mathematical modeling of multistage evaporator system in Kraft recovery process, vol. 2, 1011 Verma, 2016, Modeling the dynamics of heptads’ effect evaporator system in the Kraft recovery processes, Int. J. Control Theory Appl., 9, 5287 Karr, 1998, Solutions to systems of nonlinear equations via a genetic algorithm, Eng. Appl. Artif. Intell., 11, 369, 10.1016/S0952-1976(97)00067-5 Sarkar, 2005, Pareto-optimal solutions for multi-objective optimization of fed-batch bioreactors using nondominated sorting genetic algorithm, Chem. Eng. Sci., 60, 481, 10.1016/j.ces.2004.07.130 Ramteke, 2008, Multiobjective optimization of an industrial nylon-6 semi batch reactor using the a-jumping gene adaptations of genetic algorithm and simulated annealing, Polym. Eng. Sci., 48, 2198, 10.1002/pen.21165 Sharma, 2012, Multi-objective optimization using MS Excel with an application to design of a falling-film evaporator system, Food Bioprod. Process., 90, 123, 10.1016/j.fbp.2011.02.005 Joshi, 2014, Solving system of non-linear equations using Genetic Algorithm, 2014 Int. Conf. Adv. Comput. Commun. Informatics, IEEE, 1302, 10.1109/ICACCI.2014.6968423 Ramteke, 2011, Kinetic modeling and reactor simulation and optimization of industrially important polymerization processes: a perspective, Int. J. Chem. React. Eng., 9 Ramteke, 2015, Simulated binary jumping gene: a step towards enhancing the performance of real-coded genetic algorithm, Inf. Sci. (NY), 325, 429, 10.1016/j.ins.2015.07.033 Prakash, 2016, An elitist non-dominated sorting bat algorithm NSBAT-II for multi-objective optimization of phthalic anhydride reactor, Int. J. Syst. Assur. Eng. Manage., 7, 299, 10.1007/s13198-016-0467-6 Sarkar, 2003, Optimisation of fed-batch bioreactors using genetic algorithms: Two control variables, Comput. Aided Chem. Eng., 14, 1127, 10.1016/S1570-7946(03)80269-9 Verma, 2017, Energy management in multi stage evaporator through a steady and dynamic state analysis, Korean J. Chem. Eng., 34, 2570, 10.1007/s11814-017-0180-4 Yang, 2010 Ahmadi, 2012, Multi-objective exergy-based optimization of a polygeneration energy system using an evolutionary algorithm, Energy, 46, 21, 10.1016/j.energy.2012.02.005 Fleming, 2002, Evolutionary algorithms in control systems engineering: a survey, Control Eng. Pract., 10, 1223, 10.1016/S0967-0661(02)00081-3 Ahn, 2002, A genetic algorithm for shortest path routing problem and the sizing of populations, IEEE Trans. Evol. Comput., 6, 566, 10.1109/TEVC.2002.804323 Malik, 2014, Numerical solution to nonlinear biochemical reaction model using hybrid polynomial basis differential evolution technique, Adv. Stud. Biol., 6, 99, 10.12988/asb.2014.4520 Kuri-morales, 2003, Solution of simultaneous non-linear equations using genetic algorithms, WSEAS Trans. Syst., 1 Bhargava, 2008, Simulation of flat falling film evaporator system for concentration of black liquor, Comput. Chem. Eng., 32, 3213, 10.1016/j.compchemeng.2008.05.012