Microstructure evolution of different forging processes for 12%Cr steel during hot deformation
Tóm tắt
Từ khóa
Tài liệu tham khảo
Ennis P J, Quandakkers W J. 9-12% chromium steels: Application limits and potential for further development [C]//Parson 2000 for Advanced Materials for 21st Century Turbines and Power Plant: Proceedings of the Fifth International Charles Parsons Turbine Conference. London, UK: IOM Communications, 2000: 265–275.
Maruyam K, Sawada K, Koike J. Strengthening mechanisms of creep resistant tempered martensitic steel [J]. ISIJ International, 2001, 41(6): 641–653.
Dubey J S, Chilukuru H, Chakrakravartty J K, et al. Effects of cyclic deformation on subgrain evolution and creep in 9-12% Cr-steels [J]. Materials Science and Engineering A, 2005, 406: 152–159.
Sonderegger B, Mitsche S, Cerjak H. Microstructural analysis on a creep resistant martensitic 9-12%Cr steel using the EBSD method [J]. Materials Science and Engineering A, 2008, 481-482: 466–470.
Rojas D, Garcia J, Prat O, et al. Effect of processing parameters on the evolution of dislocation density and sub-grain size of a 12%Cr heat resistant steel during creep at 650 °C [J]. Materials Science and Engineering A, 2011, 528: 1372–1381.
Wang B Z, Fu W T, Lv Z Q, et al. Study on hot deformation behavior of 12%Cr ultra-super-critical rotor steel [J]. Materials Science and Engineering A, 2008, 487: 108–113.
Wang Z H, Fu W T, Wang B Z, et al. Study on hot deformation characteristics of 12%Cr ultra-supercritical rotor steel using processing maps and Zener-Hollomon parameter [J]. Materials Characterization, 2010, 61: 25–30.
Laasraoui A, Jonas J J. Recrystallization of austenite after deformation at high temperatures and strain rates: Analysis and modeling [J]. Metallurgical Transactions A, 1991, 22A(1): 151–160.
Laasraoui A, Jonas J J. Prediction of steel flow stresses at high temperatures and strain rates [J]. Metallurgical Transactions A, 1991, 22A(7): 1545–1558.
Sui D S, Wang W, Fu B, et al. Research on flow stress model and dynamic recrystallization model of X12CrMoWVNbN10-1-1 steel [C]//The 11th international Conference on Numerical Methods in Industrial Forming Processes. Shenyang, China: AIP Publishing LLC, 2013: 826–837.
Chen F, Cui Z S, Chen S J. Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part I. Dynamic recrystallization [J]. Materials Science and Engineering A, 2011, 528: 5073–5080.