Microstructure evolution and mechanical performance of nickel based superalloy C1023 at elevated temperatures

Shi, 2015, Effects of Cr content on microstructure and mechanical properties of single crystal superalloy, Trans. Nonferrous Metals Soc. China, 25, 776, 10.1016/S1003-6326(15)63663-9 Wang, 2015, Effect of minor carbon additions on the high-temperature creep behavior of a single-crystal nickel-based superalloy, Mater. Charact., 104, 81, 10.1016/j.matchar.2015.04.007 Li, 2006, The effect of γ′ content on the densities of Ni-based superalloys, Metall. Mater. Trans. B Process Metall. Mater. Process. Sci., 37, 781, 10.1007/s11663-006-0060-5 Tiley, 2009, Coarsening kinetics of γ′ precipitates in the commercial nickel base Superalloy René 88 DT, Acta Mater., 57, 2538, 10.1016/j.actamat.2009.02.010 Yu, 2014, Effect of carbon addition on carbide morphology of single crystal Ni-based superalloy, Trans. Nonferrous Metals Soc. China, 24, 339, 10.1016/S1003-6326(14)63066-1 Aghajani, 2016, Identification of Mo-rich M23C6 carbides in alloy 718, Metall. Mater. Trans. A, 47, 4382, 10.1007/s11661-016-3593-5 Sundararaman, 1997, Carbide precipitation in nickel base superalloys 718 and 625 and their effect on mechanical properties, Superalloys, 367 Wang, 2017, Effect of melt heat treatment on MC carbide formation in nickel-based superalloy K465, Results Phys., 7, 2111, 10.1016/j.rinp.2017.06.020 Yin, 2007, Effect of melt treatment on carbides formation in a cast nickel-base superalloy M963, J. Mater. Process. Technol., 183, 440, 10.1016/j.jmatprotec.2006.11.002 Donachie, 2002 Gong, 2016, Investigation of solidification and segregation characteristics of cast Ni-base superalloy K417G, J. Mater. Sci. Technol. Yang, 2013, Effects of heat treatments on the microstructure and mechanical properties of Rene 80, Mater. Des., 43, 66, 10.1016/j.matdes.2012.06.039 Xiang, 2017, Site preference of metallic elements in M23C6 carbide in a Ni-based single crystal superalloy, Mater. Des., 129, 9, 10.1016/j.matdes.2017.05.023 Sun, 2015, Thermal stability of primary MC carbide and its influence on the performance of cast Ni-base superalloys, Mater. Des., 69, 81, 10.1016/j.matdes.2014.12.038 Singh, 2011, Influence of cooling rate on the development of multiple generations of γ′ precipitates in a commercial nickel base superalloy, Mater. Charact., 62, 878, 10.1016/j.matchar.2011.06.002 Singh, 2013, Mechanisms related to different generations of γ′ precipitation during continuous cooling of a nickel base superalloy, Acta Mater., 61, 280, 10.1016/j.actamat.2012.09.058 D'Souza, 2017, Key aspects of carbide precipitation during solidification in the Ni-base superalloy, MAR M002, J. Alloys Compd., 702, 6, 10.1016/j.jallcom.2017.01.104 Dubiel, 2017, Influence of high-temperature annealing on morphological and compositional changes of phases in Ni-base single crystal superalloy, Mater. Charact., 131, 266, 10.1016/j.matchar.2017.07.021 Collins, 2015, Time-resolved synchrotron diffractometry of phase transformations in high strength nickel-based superalloys, Acta Mater., 94, 244, 10.1016/j.actamat.2015.04.046 Peterlechner, 2015, EELS analysis of the nitrogen content of carbide particles in a commercial γ′-strengthened nickel-base superalloy, Scr. Mater., 107, 42, 10.1016/j.scriptamat.2015.05.016 Li, 2014, Effect of solidification condition and carbon content on the morphology of MC carbide in directionally solidified nickel-base superalloys, J. Mater. Sci. Technol., 30, 1296, 10.1016/j.jmst.2014.06.010 Liu, 2017, Effects of microporosity and precipitates on the cracking behavior in polycrystalline superalloy Inconel 718, Mater. Charact., 132, 175, 10.1016/j.matchar.2017.08.012 Prasad, 2016, Role of shrinkage pores, carbides on cyclic deformation behaviour of conventionally cast nickel base superalloy CM247LC® at 870 °C, Mater. Sci. Eng. A, 654, 381, 10.1016/j.msea.2015.12.054 Liu, 2003, Formation of carbides and their effects on stress rupture of a Ni-base single crystal superalloy, Mater. Sci. Eng. A, 361, 191, 10.1016/S0921-5093(03)00517-3 García de la Yedra, 2012, Thermo-mechanical fatigue behaviour and life prediction of C-1023 nickel based superalloy, Int. J. Eng. Sci. Technol., 3, 10.4314/ijest.v3i6.8 Kolagar, 2017, Failure analysis of gas turbine first stage blade made of nickel-based superalloy, Case Stud. Eng. Fail. Anal., 8, 61, 10.1016/j.csefa.2017.04.002 García de la Yedra, 2014, Thermomechanical fatigue tests development and life prediction of a nickel base superalloy, Exp. Tech., 40, 777, 10.1007/s40799-016-0078-9 Tin, 2006, Investigation of oxidation characteristics and atomic partitioning in platinum and ruthenium bearing single-crystal Ni-based superalloys, Metall. Mater. Trans. A, 37, 1389, 10.1007/s11661-006-0083-1 Kraemer, 2017, Application-oriented description of time−/temperature dependent crack growth in a conventionally cast nickel-based superalloy, Int. J. Fatigue, 96, 78, 10.1016/j.ijfatigue.2016.11.025