Microstructure and anti-corrosion properties of acrylic bone cement-based with MOF nanostructured hybrid coatings on AZ31 Mg alloy

Zhang, 2016, Influence of surface pre-treatment on the deposition and corrosion properties of hydrophobic coatings on a magnesium alloy, Corrosion Sci., 112, 483, 10.1016/j.corsci.2016.08.013 Shi, 2017, A robust superhydrophobic PPS-PTFE/SiO2 composite coating on AZ31 Mg alloy with excellent wear and corrosion resistance properties, J. Alloys Compd., 721, 157, 10.1016/j.jallcom.2017.05.333 Amaravathy, 2014, Novel sol gel coating of Nb2O5 on magnesium alloy for biomedical applications, Surf. Coating. Technol., 244, 131, 10.1016/j.surfcoat.2014.01.050 Ren, 2018, Nanostructured amorphous magnesium phosphate/poly (lactic acid) composite coating for enhanced corrosion resistance and bioactivity of biodegradable AZ31 magnesium alloy, Prog. Org. Coating, 118, 1, 10.1016/j.porgcoat.2018.01.014 Luo, 2011, Electrochemical deposition of conducting polymer coatings on magnesium surfaces in ionic liquid, Acta Biomater., 7, 441, 10.1016/j.actbio.2010.09.006 Hatami, 2015, Improvement in the protective performance and adhesion of polypyrrole coating on AZ31 Mg alloys, Prog. Nat. Sci. Mater. Int., 25, 478, 10.1016/j.pnsc.2015.10.001 Ostrowski, 2013, Corrosion protection and improved cytocompatibility of biodegradable polymeric layer-by-layer coatings on AZ31 magnesium alloys, Acta Biomater., 9, 8704, 10.1016/j.actbio.2013.05.010 Chunyan, 2019, Ratio of total acidity to pH value of coating bath: a new strategy towards phosphate conversion coatings with optimized corrosion resistance for magnesium alloys, Corrosion Sci., 150, 279, 10.1016/j.corsci.2019.01.046 Chen, 2021, One-step in situ synthesis of graphene oxide/MgAl-layered double hydroxide coating on a micro-arc oxidation coating for enhanced corrosion protection of magnesium alloys, Surf. Coating. Technol., 413, 10.1016/j.surfcoat.2021.127083 Saberi, 2021, A comprehensive review on surface modifications of biodegradable magnesium-based implant alloy: polymer coatings opportunities and challenges, Coatings, 11, 747, 10.3390/coatings11070747 Moradi, 2022, Construction of highly anti-corrosion and super-hydrophobic polypropylene/graphene oxide nanocomposite coatings on carbon steel: experimental, electrochemical and molecular dynamics studies, Construct. Build. Mater., 317, 10.1016/j.conbuildmat.2021.126136 Wang, 2020, Biodegradable magnesium-based implants in orthopedics—a general review and perspectives, Adv. Sci., 7 Olad, 2013, Preparation and corrosion resistance of nanostructured PVC/ZnO-polyaniline hybrid coating, Prog. Org. Coating, 76, 113, 10.1016/j.porgcoat.2012.08.017 Madhan Kumar, 2015, In situ electrochemical synthesis of polyaniline/f-MWCNT nanocomposite coatings on mild steel for corrosion protection in 3.5% NaCl solution, Prog. Org. Coating, 78, 387, 10.1016/j.porgcoat.2014.07.009 Aravindan, 2016, Influence of solvent composition on the anti-corrosion performance of copper-polypyrrole (Cu-PPy) coated 304 stainless steel, Prog. Org. Coating, 95, 38, 10.1016/j.porgcoat.2016.02.008 Madhan Kumar, 2018, Influence of surface treatment on PEDOT coatings: surface and electrochemical corrosion aspects of newly developed Ti alloy, RSC Adv., 8, 19181, 10.1039/C8RA01718B Xavier, 2021, Corrosion protection performance and interfacial interactions of polythiophene/silanes/MnO2 nanocomposite coatings on magnesium alloy in marine environment, Int. J. Polym. Anal. Char., 26, 309, 10.1080/1023666X.2021.1887627 Wang, 2019, Development of a novel biodegradable and anti-bacterial polyurethane coating for biomedical magnesium rods, Mater. Sci. Eng., C, 99, 344, 10.1016/j.msec.2019.01.119 Rajitha, 2020, Application of modified graphene oxide – polycaprolactone nanocomposite coating for corrosion control of mild steel in saline medium, Mater. Chem. Phys., 241, 10.1016/j.matchemphys.2019.122050 Kruk, 2019, The influence of heat treatment on the microstructure, surface topography and selected properties of PEEK coatings electrophoretically deposited on the Ti-6Al-4V alloy, Prog. Org. Coating, 133, 180, 10.1016/j.porgcoat.2019.04.049 Conde-Nicho, 2022, Corrosion protection by poly(3-hexylthiophene)/poly(methyl-methacrylate) coating of cracked 410 stainless steel, Anti-corrosion Methods & Mater., 69, 279, 10.1108/ACMM-07-2021-2507 Hsissou, 2018, Elaboration and electrochemical studies of the coating behavior of a new pentafunctional epoxy polymer (pentaglycidyl ether pentabisphenol phosphorus) on E24 carbon steel in 3.5 % NaCl, J. Chem. Technol. Metall., 53, 898 Da Silva, 2020, Evaluation of temperature influence on tensile strength and izod impact resistance on poly methyl methacrylate (Pmma), 100 Bauer, 2002, Bioactive materials in orthopaedic surgery: overview and regulatory considerations, Clin. Orthop. Relat. Res., 395, 11, 10.1097/00003086-200202000-00003 Ysiwata-Rivera, 2020, Effect of modified hexagonal boron nitride nanoparticles on the emulsion stability, viscosity and electrochemical behavior of nanostructured acrylic coatings for the corrosion protection of AISI 304 stainless steel, Coatings, 10, 488, 10.3390/coatings10050488 Mirzaee, 2021, Corrosion properties of organic polymer coating reinforced two-dimensional nitride nanostructures: a comprehensive review, J. Polym. Res., 28, 1, 10.1007/s10965-021-02434-z Al-Sherify, 2022, Corrosion behavior of AZ31 magnesium alloys coated with PMMA/HA as biodegradable implants, Mater, Today Proc, 61, 1100 Jamali, 2023, Preparation of hierarchical MOF-5 films using morphology controlled ZnO coatings for temperature dependent optical sensors application, Mater. Chem. Phys., 304, 10.1016/j.matchemphys.2023.127775 Zhang, 2018, Insights into the use of metal-organic framework as high-performance anticorrosion coatings, ACS Appl. Mater. Interfaces, 10, 2259, 10.1021/acsami.7b18713 Guo, 2019, pH-responsive self-healing anticorrosion coatings based on benzotriazole-containing zeolitic imidazole framework, Colloids Surfaces A Physicochem. Eng. Asp., 561, 1, 10.1016/j.colsurfa.2018.10.044 Sabzehmeidani, 2023, Insight into the microstructural characteristics and corrosion properties of AZ31 Mg alloy coated with polyurethane containing nanostructures of copper metal organic frameworks, Mater. Lett., 341, 10.1016/j.matlet.2023.134294 Lashgari, 2021, Application of nanoporous cobalt-based ZIF-67 metal-organic framework (MOF) for construction of an epoxy-composite coating with superior anti-corrosion properties, Corrosion Sci., 178, 10.1016/j.corsci.2020.109099 Afravi, 2022, Design of a sensitive fluorescent Zn-based metal-organic framework sensor for cimetidine monitoring in biological and pharmaceutical samples, ACS Omega, 7, 22221, 10.1021/acsomega.2c00874 Gupta, 2021, Fabrication of Zn-MOF/ZnO nanocomposites for room temperature H2S removal: adsorption, regeneration, and mechanism, Chemosphere, 274, 10.1016/j.chemosphere.2021.129789 Zong, 2017, Novel hydrothermal synthesis of hexagonal prism-like CeO2 nanotubes and their optical properties, J. Mater. Sci. Mater. Electron., 28, 2545, 10.1007/s10854-016-5829-y Ghomshehzadeh, 2020, A new pillared Cd-organic framework as adsorbent of organic dyes and as precursor of CdO nanoparticles, Polyhedron, 176, 10.1016/j.poly.2019.114265 Riau, 2015, Surface modification of PMMA to improve adhesion to corneal substitutes in a synthetic core-skirt keratoprosthesis, ACS Appl. Mater. Interfaces, 7, 21690, 10.1021/acsami.5b07621 Ayre, 2014, Ageing and moisture uptake in polymethyl methacrylate (PMMA) bone cements, J. Mech. Behav. Biomed. Mater., 32, 76, 10.1016/j.jmbbm.2013.12.010 Bhargava, 2018, Investigation of structural, optical and electrical properties of Co3O4 nanoparticles, 10.1063/1.5032369 Ma, 2007, Fabrication of super-hydrophobic film from PMMA with intrinsic water contact angle below 90, Polymer (Guildf), 48, 7455, 10.1016/j.polymer.2007.10.038 Zeng, 2015, Corrosion resistance of Zn–Al layered double hydroxide/poly(lactic acid) composite coating on magnesium alloy AZ31, Front. Mater. Sci., 9, 355, 10.1007/s11706-015-0307-7 Ribeiro, 2016, Application of electrochemical impedance spectroscopy (EIS) to monitor the corrosion of reinforced concrete: a new approach, Construct. Build. Mater., 111, 98, 10.1016/j.conbuildmat.2016.02.047 Ma, 2019, Electrochemical investigations on AZ series magnesium alloys as anode materials in a sodium chloride solution, J. Mater. Eng. Perform., 28, 2873, 10.1007/s11665-019-04035-w Xie, 2020, Effects of microstructure evolution on discharge properties of AZ31 alloy as anode for seawater battery, Mater. Corros., 71, 1462, 10.1002/maco.202011598 Zhang, 2021, The effects of Sn content on the corrosion behavior and mechanical properties of Mg-5Gd-3Y- x Sn-0.5Zr alloys, RSC Adv., 11, 1332, 10.1039/D0RA08986A Zahedi Asl, 2020, The effect of cerium cation on the microstructure and anti-corrosion performance of LDH conversion coatings on AZ31 magnesium alloy, J. Alloys Compd., 821, 10.1016/j.jallcom.2019.153248