Microstructural evolution and high temperature oxidation characteristics of cold sprayed Ni-20Cr nanostructured alloy coating

Bala, 2017, Performance of cold sprayed Ni based coatings in actual boiler environment, Surf. Coat. Technol., 318, 50, 10.1016/j.surfcoat.2016.11.075 Kawahara, 2007, Application of high temperature corrosion-resistant materials and coatings under severe corrosive environment in waste-to-energy boilers, J. Therm. Spray Technol., 16, 202, 10.1007/s11666-006-9012-5 Fantozzi, 2017, Chlorine-induced high temperature corrosion of Inconel 625 sprayed coatings deposited with different thermal spray techniques, Surf. Coat. Technol., 318, 233, 10.1016/j.surfcoat.2016.12.086 Lopez, 2014, High-temperature corrosion behavior of Ni–50Cr coating deposited by high velocity oxygen–fuel technique on low alloy ferritic steel, Mater. Des., 59, 94, 10.1016/j.matdes.2014.02.027 Song, 2017, Gas and liquid-fuelled HVOF spraying of Ni50Cr coating: microstructure and high temperature oxidation, Surf. Coat. Technol., 318, 224, 10.1016/j.surfcoat.2016.07.046 Sadeghimeresht, 2018, Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings, Corros. Sci., 132, 170, 10.1016/j.corsci.2017.12.033 Senthilkumar, 2015, Effect of thermal cycle on Ni-Cr based nanostructured thermal spray coating in boiler tubes, Trans. Nonferrous Metals Soc. China, 25, 1533, 10.1016/S1003-6326(15)63755-4 He, 2002, Review-nanostructured coatings, Mater. Sci. Eng. A, 336, 274, 10.1016/S0921-5093(01)01986-4 Kumar, 2015, Development of nano-crystalline cold sprayed Ni-20Cr coatings for high temperature oxidation resistance, Surf. Coat. Technol., 266, 122, 10.1016/j.surfcoat.2015.02.032 Ivannikov, 2016, The effect of electromechanical treatment on structure and properties of plasma sprayed Ni-20Cr coating, J. Alloys Compd., 655, 11, 10.1016/j.jallcom.2015.09.125 Lavernia, 1998, Thermal spray processing of nanostructured materials, 283 Kumar, 2015, Fire side erosion-corrosion protection of boiler tubes by nanostructured coatings, Mater. Corros., 66, 695, 10.1002/maco.201407954 Champagne, 2007 Fauchais, 2014 Pabi, 1996, Synthesis of nanocrystalline alloys and intermetallics by mechanical alloying, Bull. Mater. Sci., 19, 939, 10.1007/BF02744629 Gleiter, 1989, Nanocrystalline materials, Prog. Mater. Sci., 33, 223, 10.1016/0079-6425(89)90001-7 Koch, 2006 Suryanarayana, 1995, Nanocrystalline materials, Int. Mater. Rev., 40, 41, 10.1179/imr.1995.40.2.41 Papyrin, 2006 Irissou, 2008, Review on cold spray process and technology: part I–intellectual property, J. Therm. Spray Technol., 17, 495, 10.1007/s11666-008-9203-3 Assadi, 2016, Cold spraying – a materials perspective, Acta Mater., 116, 382, 10.1016/j.actamat.2016.06.034 Raoelison, 2018, Cold gas dynamic spray technology: a comprehensive review of processing conditions for various technological developments till to date, Addit. Manuf., 19, 134, 10.1016/j.addma.2017.07.001 Suryanarayana, 2001, Mechanical alloying and milling, Prog. Mater. Sci., 46, 1, 10.1016/S0079-6425(99)00010-9 Singh, 2009, High temperature corrosion behavior of some Fe-, Co- and Ni-base superalloys in the presence of Y2O3 as inhibitor, Appl. Surf. Sci., 255, 7062, 10.1016/j.apsusc.2009.03.040 Bala, 2012, Investigations on the behavior of HVOF and cold sprayed Ni-20Cr coating on T22 boiler steel in actual boiler environment, J. Therm. Spray Technol., 21, 144, 10.1007/s11666-011-9698-x Chatha, 2013, High-temperature behavior of a NiCr-coated T91 boiler steel in the platen superheater of coal-fired boiler, J. Therm. Spray Technol., 22, 838, 10.1007/s11666-013-9899-6 Szymanski, 2015, Thermally sprayed coatings resistant to erosion and corrosion for power plant boilers – a review, Surf. Coat. Technol., 268, 153, 10.1016/j.surfcoat.2014.10.046 Xiong, 2004, Study of aluminum bronze coating by cold spray process, 320 Williams, 2009 Swaminathan, 2018, Effects of alloyed La, Cu and B on the oxidation of Fe-22Cr ferritic stainless steels under simulated cathode side atmosphere of solid oxide fuel cell interconnects, Corros. Sci., 133, 150, 10.1016/j.corsci.2018.01.025 Young, 2008 Swaminathan, 2016, Long term high temperature oxidation characteristics of La and Cu alloyed ferritic stainless steels for solid oxide fuel cell interconnects, J. Power Sources, 327, 104, 10.1016/j.jpowsour.2016.07.044 Khanna, 2016 Yao, 2017, A magnetron sputtered microcrystalline β-NiAl coating for SC superalloys. Part II. Effects of a NiCrO diffusion barrier on oxidation behavior at 1100 °C, Appl. Surf. Sci., 407, 485, 10.1016/j.apsusc.2017.02.245 Kamal, 2008, Hot corrosion behavior of detonation gun sprayed Cr3C2-NiCr coatings on Ni and Fe-based superalloys in Na2SO4-69%V2O5 environment at 900 °C, J. Alloys Compd., 463, 358, 10.1016/j.jallcom.2007.09.019 Hassani-Gangaraj, 2015, Critical review of corrosion protection by cold spray coatings, Surf. Eng., 31, 803, 10.1179/1743294415Y.0000000018 Ahuja, 2018, A comparative study to evaluate the corrosion performance of Zr incorporated Cr3C2-(NiCr) coating at 900 °C, Ceram. Int., 44, 6479, 10.1016/j.ceramint.2018.01.047 Swaminathan, 2015, Characteristics of oxide scale formed on Cu-bearing austenitic stainless steel during early stages of high temperature oxidation, Appl. Surf. Sci., 353, 29, 10.1016/j.apsusc.2015.06.055 Falk-Windisch, 2018, Determination of the oxide scale growth mechanism using 18O-tracer experiments in combination with transmission electron microscopy and nanoscale secondary ion mass spectrometry, Mater. Charact., 136, 128, 10.1016/j.matchar.2017.12.001 Trindade, 2008, Experimental analysis and computer-based simulation of nitridation of Ni-base alloys – the effect of a pre-oxidation treatment, Mater. Corros., 59, 602, 10.1002/maco.200804144 Venkatraman, 1990, Cr-N (chromium-nitrogen) binary phase diagram, 1293 Taneichi, 2006, Oxidation or nitridation behavior of pure chromium alloys containing 10 mass% Ni or Fe in atmospheric heating, Mater. Trans., 47, 2540, 10.2320/matertrans.47.2540