Microstructural Evolution and Age Hardening in Aluminium Alloys
Tóm tắt
Từ khóa
Tài liệu tham khảo
I. J. Polmear: Control of precipitation processes and properties in aged aluminium alloys by trace element additions. Proc. 6th Intl Conf on Aluminium Alloys, ICAA6, Toyohashi, Japan, July 5–10, 1998, eds. T. Sato, S. Kumai, T. Kobayshi and Y. Murakami, The Japan Inst. of Light Metals, 1998, Tokyo, Japan, pp. 75–86.
A. K. Mukhopadhyay, G. J. Shiflet, and E. A. Starke: The role of trace alloy additions on precipitation in age hardenable aluminium alloys. In Morris E. Fine Symposium, P. K. Liaw, J. R. Weertman, H. L. Marcus, and J. S. Santner, eds., TMS, Warrendale, PA, pp. 283–293 (1991).
Miller, 1989, 46
P. B. Hirsch, A. Howie, R. B. Nicholson, D. W. Pashley, and M. J. Whelan: Electron Microscopy of Thin Crystals, Krieger, NY (1977).
Hono, 1995, The performance of the IMR three-dimensional atom probe, Appl. Surface Sci., 87, 453, 10.1016/0169-4332(94)00512-5
Boyes, 1976, 267
Abe, 1982, Imaging of pure Al and aged Al-4wt. % Cu alloys by field ion microscopy, Acta Metall., 30, 357, 10.1016/0001-6160(82)90215-2
Wada, 1985, FIM observation of GP zones in an Al–4Cu alloy, Acta Metall., 33, 1631, 10.1016/0001-6160(85)90158-0
Hono, 1986, Evidence of multi-layer GP zones in Al-1.7 at. % Cu alloy, Philos. Mag., 53A, 495, 10.1080/01418618608242848
Rioja, 1977, The early stages of GP zone formation in naturally aged Al-4wt. % Cu alloys, Metall. Trans., 8A, 1257, 10.1007/BF02643840
G. W. Lorimer: Precipitation in aluminium alloys. Proc. Precipitation Processes in Solids, K. C. Russell and H. I. Aaronson, eds., TMS-AIME, Warrendale, PA, pp 87–120 (1978).
R. B. Nicholson, G. Thomas, and J. Nutting: Electron microscopic studies of precipitation in aluminium alloys. J. Inst. Met. 87:429–438 (1958–59).
H. K. Hardy: Ageing curves at 110°C on binary and ternary Al–Cu alloys. J. Inst. Met. 82:236–238 (1953–54).
H. K. Hardy: The ageing characteristics of ternary aluminium–copper alloys with cadmium, indium or tin. J. Inst. Met. 80:483–492 (1951–52).
J. M. Silcock, T. J. Heal, and H. K. Hardy: Structural ageing characteristics of binary aluminium–copper alloys. J. Inst. Met. 82:239–248 (1953–54).
Phillips, 1973, Lattice resolution measurement of strain fields at Guinier-Preston zones in Al-3%Cu, Acta Metall., 21, 219, 10.1016/0001-6160(73)90007-2
Phillips, 1973, High resolution electron microscope observations on precipitation in Al-3%Cu alloy, Acta Metall., 23, 751, 10.1016/0001-6160(75)90058-9
R. H. Beton and E. C. Rollason: Hardness reversion of dilute aluminium copper and aluminium copper magnesium alloys. J. Inst. Met. 86:77–85 (1957–58).
Osamura, 1983, Structure of GP zones in an Al-1.7 at. % Cu alloy aged for 14 years at room temperature, Acta Metall., 31, 1669, 10.1016/0001-6160(83)90165-7
Federighi, 1958, Quenched-in vacancies and rate of formation in aluminium alloys, Acta Metall., 6, 379, 10.1016/0001-6160(58)90078-6
DeSorbo, 1958, Rate of clustering in Al–Cu alloys at low temperatures, Acta Metall., 6, 401, 10.1016/0001-6160(58)90019-1
Matsubara, 1983, Local atomic arrangements in the solid solution of Al-1.7 at. % Cu at 793K, Acta Metall., 31, 2129, 10.1016/0001-6160(83)90032-9
Yoshida, 1983, High resolution lattice images of GP zones in an Al-3.97 wt. % Cu alloy, Trans. Jpn. Inst. Met., 24, 378, 10.2320/matertrans1960.24.378
Karlik, 1997, High resolution electron microscopy of Guinier-Preston (GP1) zones in Al–Cu based alloys, Acta Mater., 45, 3251, 10.1016/S1359-6454(97)00003-7
Rudman, 1954, X-ray measurements of local atomic arrangements in aluminium–zinc and in aluminium–silver solid solutions, Acta Metall., 2, 576, 10.1016/0001-6160(54)90191-1
A. Bigot: PhD thesis, The University of Rouen, France (1998).
J. W. Cahn and G. Kalonji: Symmetry in solid state transformations morphologies. In Proc. Intl. Conf. on Solid-Solid Phase Transformations, Carnegie-Mellon University, Pittsburgh, PA, Aug. 10–14, 1981, H. I. Aaronsson, D. E. Laughlin, R. F. Sekerka, and C. M. Wayman, eds., The Metall. Soc. of the AIME, Pittsburgh, PA, pp. 3–14 (1981).
Phillips, 1960
Bradley, 1933, An X-ray investigation of the Cu–Al alloys, J. Inst. Met., 51, 131
Vaughan, 1967, The orientataion and shape of θ precipitates formed in an Al–Cu alloy, Phys. Stat. Sol., 20, 725, 10.1002/pssb.19670200235
A. H. Sully, H. K. Hardy, and T. J. Heal: The aluminium-tin phase diagram and the characteristics of aluminium alloys containing tin as an alloying element. J. Inst. Met. 76:269–294 (1949–50).
Silcock, 1955, The structural ageing characteristics of ternary aluminium–copper alloys with cadmium, indium or tin, J. Inst. Met., 84, 23
I. J. Polmear and H. K. Hardy: Some metallographic observations on aged aluminium–copper alloys. J. Inst. Met. 81:427–432 (1952–53).
Boyd, 1971, A calorimetric determination of precipitate interfacial energies in two Al–Cu alloys, Acta Metall., 19, 1101, 10.1016/0001-6160(71)90042-3
Sankaren, 1974, Effects of trace additions Cd, In and Sn on the interfacial structure and kinetics of growth of θ′ plates in Al–Cu alloy, Acta Metall., 22, 957
Suzuki, 1975, Precipitation of the intermediate phase in Al–Cu–Sn alloys, J. Jpn. Inst. Light Met., 25, 413, 10.2464/jilm.25.413
Kanno, 1980, The precipitation of θ′ phase in an Al–4Cu–0.06In alloy, J. Jpn. Inst. Met., 44, 1139, 10.2320/jinstmet1952.44.10_1139
Van Nuyten, 1967, Quenched structures and precipitation in Al–Cu alloys with and without trace additions of Cd, Acta Metall., 15, 1765, 10.1016/0001-6160(67)90071-5
Ringer, 1995, The effect of trace additions of Sn on precipitation in Al–Cu alloys, Metall. Mater. Trans., 26A, 2207, 10.1007/BF02671236
Geisler, 1951, 387
P. C. Varley, K. B. Day, and A. Sendorek: The structure and mechanical properties of high purity Al–Zn–Mg alloys. J. Inst. Met. 86:337–350 (1957–58).
J. L. Taylor: The effect of heat treatment on the grain boundary zones in a high purity Al–Zn–Mg alloy. J. Inst. Met. 92:301–302 (1963–64).
G. B. Brook: Precipitation in Metals, Spec. Rep. No. 3, Fulmer Res. Inst., UK (1963).
Polmear, 1989, Abnormal age hardening in an Al–Cu–Mg alloy containing silver and lithium, Scripta Metall., 23, 1213, 10.1016/0036-9748(89)90329-3
Polmear, 1988, Design and development of an experimental wrought aluminium alloy for use at elevated temperatures, Metall. Trans., 19A, 1027, 10.1007/BF02628387
J. R. Pickens, F. H. Heubaum, T. J. Langan, and L. S. Kramer: Al–Cu–Li–Mg–Ag–Zr Alloy WeldaliteTM 049. In Proc. 5th Conf. Al–Li Alloys, Williamsburg, VA, March 1989, Materials and Component Engineering Publications Ltd., Birmingham, UK, p. 1397 (1989).
Ringer, 1996, Nucleation of precipitates in aged Al–Cu–Mg–(Ag) alloys with high Cu:Mg ratios, Acta Mater., 44, 1883, 10.1016/1359-6454(95)00314-2
J. M. Silcock: The structural ageing characteristics of Al–Cu–Mg alloys with copper:magnesium weight ratios of 7:1 and 2.2:1. J. Inst. Met. 89:203–210 (1960–61).
Yu. A. Bagaryatsky: Doklady Akad. Nauk SSSR 87:559–562 (1952).
H. Perlitz and A. Westgren: The crystal structure of Al2CuMg. Arkiv. Kemi. Mineral. Geol. 16B (1943).
Taylor, 1978, Precipitation in Al–Cu–Mg–Ag casting alloy, Met. Sci., 12, 478, 10.1179/030634578790433341
Chester, 1983, Precipitation in Al–Cu–Mg–Ag alloys, 75
Knowles, 1988, The structure of {111} age-hardening precipitates in Al–Cu–Mg–Ag alloys, Acta Crystallogr., B44, 207, 10.1107/S0108768187012308
Muddle, 1989, The precipitate Ω phase in Al–Cu–Mg–Ag alloys, Acta Metall., 37, 777, 10.1016/0001-6160(89)90005-9
Garg, 1991, Convergent beam electron diffraction analysis of the Ω phase in an Al–Cu–Mg–Ag alloy, Acta Metall. Mater., 39, 1939, 10.1016/0956-7151(91)90162-T
Y. C. Chang: Ph.D. thesis, Crystal structure and nucleation behaviour of {111} precipitates in an Al–3.9Cu–0.5Mg–0.5Ag (wt. %) alloy. Carnegie Mellon University (1992).
Chang, 1993, Composition and stability of Ω phase in an Al–Cu–Mg–Ag alloy, Metall Trans., 24A, 1461, 10.1007/BF02646587
Hono, 1993, Atom probe study of the precipitation process in Al–Cu–Mg–Ag alloys, Acta Metall. Mater., 41, 829, 10.1016/0956-7151(93)90016-L
Garg, 1990, Precipitation of the Ω phase in an Al–4Cu–0.5Mg alloy, Scripta Metall., 24, 677, 10.1016/0956-716X(90)90222-3
Fonda, 1992, Accommodation of the misfit strain surrounding {111} precipitates (Ω) in Al–Cu–Mg–(Ag), Acta Metall. Mater., 40, 2539, 10.1016/0956-7151(92)90323-7
Howe, 1994, Analytical transmission electron microscopy analysis of Ag and Mg segregation to {111} θ precipitate plates in an Al–Cu–Mg–Ag alloy, Philos. Mag. Lett., 70, 111, 10.1080/09500839408240963
Ringer, 1994, Precipitate stability in Al–Cu–Mg–Ag alloys aged at high temperatures, Acta Metall. Mater., 42, 1715, 10.1016/0956-7151(94)90381-6
Hono, 1994, Pre-precipitate clustering in an Al–Cu–Mg–Ag alloy, Scripta Metall. Mater., 30, 695, 10.1016/0956-716X(94)90184-8
Murayama, 1998, Three dimensional atom probe analysis of pre-precipitate clustering in an Al–Cu–Mg–Ag alloy, Scripta Mater., 38, 1315, 10.1016/S1359-6462(98)00027-X
Reich, 1998, Evolution of Ω phase in an Al–Cu–Mg–Ag alloy—A three dimensional atom probe study, Acta Mater., 46, 6053, 10.1016/S1359-6454(98)00280-8
Suh, 1995, Influence of the elastic strain energy on the nucleation of Ω phase in Al–Cu–Mg–(Ag) alloys, Scripta Mater., 33, 205, 10.1016/0956-716X(95)00133-G
Cui, 1995, Effect of silver addition on the precipitation of the Ω phase in an Al–Cu–Mg–Ag alloy, J. Jpn. Inst. Met., 59, 492, 10.2320/jinstmet1952.59.5_492
Itoh, 1996, Effects of a small addition of magnesium and silver on the precipitation of T1 phase in an Al–4Cu–1.1Li–0.2Zr (wt. %) alloy, Mater. Sci. Eng., A211, 128, 10.1016/0921-5093(95)10157-8
Cassada, 1991, The effect of plastic deformation on Al2CuLi (T1) precipitation, Metall. Trans. A, 22A, 299, 10.1007/BF02656799
Howe, 1988, Structure and deformation behaviour of T1 precipitate plates in an Al–2Li–1Cu alloy, Metall. Trans., 19A, 2911, 10.1007/BF02647717
Herring, 1993, High resolution electron microscopy study of a high copper variant of weldalite 049 and a high strength Al–Cu–Ag–Mg–Zr alloy, J. Mater. Sci., 28, 69, 10.1007/BF00349035
Lee, 1994, Precipitate stability in alloys based on the Al–Cu system, 582
Y.-S. Lee, B. C. Muddle, and I. J. Polmear: High strength Al–Cu–Mg–Ag alloys with controlled Li additions. In Proc. 2nd Pacific Rim Intl. Conf. on Advanced Materials and Processing, K. S. Kim, J. K. Moon, and S. J. Kim, eds., Korean Inst. of Metals and Materials, Kyongju (1995).
Huang, 1998, Effects of Li content on precipitation in Al–Cu–(Li)–Mg–Ag–Zr alloys, Scripta Mater., 38, 357, 10.1016/S1359-6462(97)00503-4
S. P. Ringer, K. Hono, I. J. Polmear, and T. Sakurai: Atom probe study of the effects of Ag and Mg additions on precipitation processes in Al–Cu and Al–Cu–Li alloys. In Intl. Conf. on Solid-Solid Phase Transformations in Inorganic Materials, Pittsburgh, PA, July 17–22, W. C. Johnson, J. M. Howe, D. E. Laughlin, and W. A. Soffa, eds., TMS, Warrendale, PA, pp. 165–170 (1994).
L. Reich, M. Murayama, and K. Hono: 3DAP study of the effect of Mg and Ag additions on precipitation in Al–Cu–(Li) alloys. In Proc. 6th International Conference on Aluminium Alloys (ICAA6), July 5–10, 1998, T. Sato, S. Kumai, T. Kobayashi, and Y. Murakami, eds., Toyohashi, Japan, Japan Institute for Light Metals, Tokyo, vol. 2, pp. 739–744 (1998).
I. J. Polmear: Light alloys: Metallurgy of the light metals. Arnold, London 3rd ed. (1995).
Vietz, 1966, The influence of small additions of silver on the ageing of aluminium alloys, J. Inst. Met., 94, 410
Ringer, 1997, Cluster hardening in Al–Cu–Mg alloys, Scripta Mater., 36, 517, 10.1016/S1359-6462(96)00415-0
Ringer, 1997, On the origins of hardening in Al–Cu–Mg–(Ag) alloys, Acta Mater., 45, 3731, 10.1016/S1359-6454(97)00039-6
L. Reich, S. P. Ringer, and K. Hono: Philos. Mag. Lett. (in press).
R. B. Nicholson: The interaction between point defects and solute atoms in aluminium alloys. In Intl. Conf. on Electron Diffraction and the Nature of Defects in Crystals, August 16–21, 1965, Australian Academy of Science, Intl. Union of Crystallog. and Intl. Union of Pure and Appl. Phys., Australian Acad. Sci., Melbourne, II N-2 (1965).
Ratchev, 1998, Precipitation hardening of an Al-4.2 wt. % Mg 0.6 wt. % Cu alloy, Acta Mater., 46, 3523, 10.1016/S1359-6454(98)00033-0
J. T. Staley: Metallurgical aspects affecting strength of heat treatable alloy products used in the aerospace industry. In Proc. 3rd Intl. Conf: Aluminium Alloys—Their Physical and Mechanical Properties (ICAA3), June 22–26, 1992, L. Arnberg, O. Lohne, E. Nes, and N Ryum, eds., Norwegian Institute Of Technology, Trondheim, Norway, vol. 3, pp. 107–129 (1992).
Ringer, 1998, Response to comments on cluster hardening by Zahra et al, Scripta Mater., 39, 1559, 10.1016/S1359-6462(98)00364-9
Zahra, 1998, Comments on cluster hardening in an aged Al–Cu–Mg alloy, Scripta Mater., 39, 1553, 10.1016/S1359-6462(98)00365-0
Ringer, 1996, Precipitation processes during the early stages of aging in Al–Cu–Mg alloys, Appl. Surface Sci., 94, 253, 10.1016/0169-4332(95)00383-5
Wilson, 1965, The nucleation and growth of S′ precipitates in an aluminium–2.5%copper–1.2%magnesium alloy, Acta Metall., 13, 1321, 10.1016/0001-6160(65)90043-X
Gupta, 1987, The crystallography and morphology of the S′-phase in an Al(CuMg) alloy, Philos. Mag., A55, 375, 10.1080/01418618708209875
Park, 1983, Microstructures of the commercial 7075 Al alloy in the T651 and T& tempers, Metall Trans., 14A, 1957, 10.1007/BF02662363
Chopra, 1995, The structure of metastable {111}α precipitates in an Al-2.5wt. % Cu-1.5 wt. % Mg −0.5 wt. % Ag alloy, Philos. Mag. Lett., 71, 319, 10.1080/09500839508241014
Auld, 1966, T phase precipitation induced by addition of silver to an Al–Cu–Mg alloy, Nature, 209, 703, 10.1038/209703a0
Bergman, 1952, The crystal structure of the metallic phase Mg32(AlZn)49, Acta Crystallog., 10, 254, 10.1107/S0365110X57000808
Ringer, 1998, Microstructural evolution in high strength microalloyed aluminium alloys, J. Mater. Sci. Eng., 250A, 120, 10.1016/S0921-5093(98)00547-4
Chopra, 1996, The structure or primary strengthening precipitates in an Al-1.5 wt. % Cu-4.0 wt. % Mg-0.5 wt. % Ag alloy, Philos. Mag. Lett., 73, 351, 10.1080/095008396180623
Thomas, 1961, The aging characteristics of aluminium alloys, J. Inst. Met., 90, 57
Dutta, 1991, Calorimetric study of precipitation in commercial Al alloys, J. Mater. Sci. Lett., 10, 323, 10.1007/BF00719697
Edwards, 1998, The precipitation sequence in Al–Mg–Si alloys, Acta Mater., 46, 3893, 10.1016/S1359-6454(98)00059-7
Murayama, 1998, Pre-precipitate clusters and precipitation processes in Al–Mg–Si alloys, Acta Mater., 47, 1537, 10.1016/S1359-6454(99)00033-6
M. Saga and M. Kikuchi: Unpublished research, Nippon Steel Corporation (1998).
M. Murayama and K. Hono: Distribution of Cu atoms during aging of Al–Mg–Si–Cu alloy. Proc. 6th Intl. Conf. on Al Alloys (ICAA6), Toyohashi, Japan, July 5–10, 1998, eds. T. Sato, S. Kumai, T. Kobayashi and Y. Munakami, The Japan Inst. of Light Metals, 1998, Tokyo, Japan, pp. 837–842.
S. K. Caraher, I. J. Polmear, and S. P. Ringer: Effects of Cu and Ag on precipitation in Al–4Zn–3Mg (wt. %). In Proc. 6th Intl. Conf. Aluminium Alloys (ICAA6), July 5–10, 1998, T. Sato, S. Kumai, T. Kobayashi, and Y. Murakami, eds. Toyohashi, Japan, Japan Institute for Light Metals, Tokyo, Vol. 2, pp. 739–744, (1998).
I. J. Polmear: The ageing characteristics of ternary aluminium–zinc–magnesium alloys. J. Inst. Met. 86:113–121 (1957–58).
I. J. Polmear: The upper temperature limit of stability of GP zones in ternary aluminium–zinc–magnesium alloys. J. Inst. Met. 87:24–25 (1958–59).
J. T. Vietz, K. R. Sargant, and I. J. Polmear: The influence of small additions of silver on the ageing of aluminium alloys: Further observations on Al–Zn–Mg alloys. J. Inst. Met. 92:327–333 (1963–64).
Gjønnes, 1970, An electron microscope investigation of the microstructure in an aluminium–zinc–magnesium alloy, Acta Metall., 18, 881, 10.1016/0001-6160(70)90016-7
Hunsicker, 1976, Development of Al–Zn–Mg–Cu alloys for aircraft, 359
Yamamoto, 1998, Calorimetric and resistivity study on the formation and redissolution of precipitates in 7050 aluminium alloy, Mater. Trans. JIM, 39, 69, 10.2320/matertrans1989.39.69
Thackery, 1968, The nature and morphology of precipitates in Al–Zn–Mg alloys, J. Inst. Met., 96, 228
Mondolfo, 1956, Structural changes during the ageing of an Al–Mg–Zn alloy, Trans. AIME, 206, 1378
G. Thomas and J. Nutting: The ageing characteristics of aluminium alloys, electron microscope studies of alloys based on the aluminium zinc magnesium system. J. Inst. Met. 88:81–90 (1959–60).
Schmalzried, 1957, Rontgenographische untersuchungen uberdie ausartung einer aluminium-magnesium-zink-legierung, Z. Metallkund., 49, 291
Gould, 1964, The influence of Mg atoms on diffusion processes in Al–Zn alloys, Acta Metall., 12, 954, 10.1016/0001-6160(64)90160-9
Ortner, 1988, On the structure and composition of GP zones in high purity Al–Zn–Mg alloys, Scripta Metall., 22, 843, 10.1016/S0036-9748(88)80061-9
Mukhopadhyay, 1994, Guinier-Preston zones in a high purity Al–Zn–Mg alloy, Philos. Mag. Lett., 70, 135, 10.1080/09500839408240966
S. K. Caraher, K. Hono, I. J. Polmear, and S. P. Ringer: unpublished research.
Graf, 1956, The ageing of ternary aluminium–zinc–magnesium alloys, J. Inst. Met., 86, 535
Auld, 1974, The structure of the metastable η′ phase in aluminium–zinc–magnesium alloys, J. Aust. Inst. Met., 19, 194
Yan, 1991, On the crystal structure of S′ phase in Al-Cu-Mg alloy, Mater. Sci. Eng., A141, 123, 10.1016/0921-5093(91)90715-Y
Ortner, 1988, Atom probe analysis of precipitates in AlZnMg alloy 7018, Scripta Mater., 22, 839, 10.1016/S0036-9748(88)80060-7
Brenner, 1991, FIM/atom probe analysis of a heat treated 7150 aluminium alloy, Surface Sci., 246, 210, 10.1016/0039-6028(91)90417-Q
Hono, 1992, Quantitative atom probe analysis of some aluminium alloys, Surface Sci., 266, 350, 10.1016/0039-6028(92)91045-D
Bigot, 1996, Tomographic atom probe study of age hardening precipitation in industrial AlZnMgCu (7050) alloy, Mater. Sci. For., 217–222, 695
Stiller, 1998, Hardening precipitates and their precursors in 7XXX alloys, 615
Polmear, 1960, The ageing characteristics of complex Al–Zn–Mg alloys, J. Inst. Met., 89, 51