Microstructural Characterization and Mechanical Properties of Friction-Welded IN718 and SS410 Dissimilar Joint
Tóm tắt
Continuous drive friction welding studies on IN718 and SS410 dissimilar combination have been investigated. The influence of friction-welded parameters on microstructure and mechanical properties was dealt in detail. Six different joints were fabricated by varying rotational speed and friction pressure, by keeping forging pressure and friction time as constant. The microstructural study revealed the formation of different zones in the weld region of the dissimilar joint. Tensile and microhardness tests were conducted in order to examine the impact of process parameters of the joint and to define the ideal welding condition. The fractography images exposed the ductile fracture mode for all the samples. The friction-welded joint fabricated with the rotational speed of 1500 rpm and frictional pressure of 189 MPa yielded higher tensile strength and hardness.
Tài liệu tham khảo
H. Hänninen, P. Aaltonen, A. Brederholm, U. Ehrnsteń, H. Gripenberg, A. Toivonen, J. Pitkänen, I. Virkkunen, Dissimilar metal weld joints and their performance in nuclear power plant and oil refinery conditions. VTT Tied. 2347, 3–208 (2006)
M. Sahin, Evaluation of the joint-interface properties of austenitic-stainless steels (AISI 304) joined by friction welding. Mater. Des. 28(7), 2244–2250 (2007)
Y.S. Sato, P. Arkom, H. Kokawa, T.W. Nelson, R.J. Steel, Effect of microstructure on properties of friction stir welded Inconel Alloy 600. Mater. Sci. Eng., A 477(1–2), 250–258 (2008)
V. Saravanan, N. Banerjee, R. Amuthakkannan, S. Rajakumar, Microstructural evolution and mechanical properties of friction stir welded dissimilar AA2014-T6 and AA7075-T6 aluminum alloy joints. Metallogr. Microstruct. Anal. 4(3), 178–187 (2015)
V. Saravanan, S. Rajakumar, A. Muruganandam, Effect of friction stir welding process parameters on microstructure and mechanical properties of dissimilar AA6061-T6 and AA7075-T6 aluminum alloy joints. Metallogr. Microstruct. Anal. 5(6), 476–485 (2016)
S.D. Meshram, T. Mohandas, G.M. Reddy, Friction welding of dissimilar pure metals. J. Mater. Process. Technol. 184(1–3), 330–337 (2007)
R. Winiczenko, Effect of friction welding parameters on the tensile strength and microstructural properties of dissimilar AISI 1020-ASTM A536 joints. Int. J. Adv. Manuf. Technol. 84(5–8), 941–955 (2016)
D. Ananthapadmanaban, V.S. Rao, N. Abraham, K.P. Rao, A study of mechanical properties of friction welded mild steel to stainless steel joints. Mater. Des. 30(7), 2642–2646 (2009)
M. Azizieh, M. Khamisi, D.J. Lee, E.Y. Yoon, H.S. Kim, Characterizations of dissimilar friction welding of ST37 and CK60 steels. Int. J. Adv. Manuf. Technol. 85(9–12), 2773–2781 (2016)
H.K. Rafi, G.D.J. Ram, G. Phanikumar, K.P. Rao, Microstructure and tensile properties of friction welded aluminum alloy AA7075-T6. Mater. Des. 31(5), 2375–2380 (2010)
R. Paventhan, P.R. Lakshminarayanan, V. Balasubramanian, Optimization of friction welding process parameters for joining carbon steel and stainless steel. J. Iron. Steel Res. Int. 19(1), 66–71 (2012)
N. Özdemir, Investigation of the mechanical properties of friction-welded joints between AISI 304L and AISI 4340 steel as a function rotational speed. Mater. Lett. 59(19–20), 2504–2509 (2005)
S.V. Lalam, G.M. Reddy, T. Mohandas, M. Kamaraj, B.S. Murty, Continuous drive friction welding of Inconel 718 and EN24 dissimilar metal combination. Mater. Sci. Technol. 25(7), 851–861 (2009)
R. Damodaram, S.G.S. Raman, D.V.V. Satyanarayana, G.M. Reddy, K.P. Rao, Hot tensile and stress rupture behavior of friction welded alloy 718 in different pre-and post-weld heat treatment conditions. Mater. Sci. Eng., A 612, 414–422 (2014)
H. Wang, K. Ikeuchi, M. Aritoshi, M. Takahashi, A. Ikeda, Joint strength of Inconel 718 alloy and its improvement by post-weld heat treatment – joint performance and its controlling factors in friction welding of Inconel 718 alloy. Weld. Int. 23(9), 679–686 (2009)
W. Guo, G. You, G. Yuan, X. Zhang, Microstructure and mechanical properties of dissimilar inertia friction welding of 7A04 aluminum alloy to AZ31 magnesium alloy. J. Alloys Compd. 695, 3267–3277 (2017)
Ý. Kirik, N.N. Özdemýr, Effect of process parameters on the microstructure and mechanical properties of friction-welded joints of AISI 1040/AISI 304 l steels. Mater. Tehnol. 49(5), 825–832 (2015)
V. Saravanan, S. Rajakumar, N. Banerjee, R. Amuthakkannan, Effect of shoulder diameter to pin diameter ratio on microstructure and mechanical properties of dissimilar friction stir welded AA2024-T6 and AA7075-T6 aluminum alloy joints. Int. J. Adv. Manuf. Technol. 87(9–12), 3637–3645 (2016)
H. Ma, G. Qin, P. Geng, F. Li, B. Fu, X. Meng, Microstructure characterization and properties of carbon steel to stainless steel dissimilar metal joint made by friction welding. Mater. Des. 86, 587–597 (2015)
R. Palanivel, R.F. Laubscher, I. Dinaharan, D.G. Hattingh, Microstructure and mechanical characterization of continuous drive friction welded grade 2 seamless titanium tubes at different rotational speeds. Int. J. Press. Vessels Pip. 154, 17–28 (2017)
R. Palanivel, I. Dinaharan, R.F. Laubscher, Assessment of microstructure and tensile behavior of continuous drive friction welded titanium tubes. Mater. Sci. Eng., A 687, 249–258 (2017)