Microscale combustion: Technology development and fundamental research
Tóm tắt
Từ khóa
Tài liệu tham khảo
Dunn-Rankin, 2005, Personal power systems, Progress in Energy and Combustion Science, 31, 422, 10.1016/j.pecs.2005.04.001
Fernandez-Pello, 2002, Micropower generation using combustion: issues and approaches, Proceedings of the Combustion Institute, 29, 883, 10.1016/S1540-7489(02)80113-4
Kang, 2006, Electrodes with high power and high capacity for rechargeable lithium batteries, Science, 311, 977, 10.1126/science.1122152
Yetter, 2007, Combustion issues and approaches for chemical microthrusters
Sutton, 2001
Chigier N and Gemci T. A review of micro propulsion technology, 41st aerospace sciences meeting and exhibit, AIAA-2003-670; 2003.
Annen KD, Stickler DB and Woodroffe J. Glow plug-assisted HCCI combustion in a miniature internal combustion engine (MICE) generator, 44th AIAA aerospace sciences meeting and exhibit, AIAA-2006-1349; 2006.
Srinivasan, 1997, Micromachined reactors for catalytic partial oxidation reactions, AIChE Journal, 43, 3059, 10.1002/aic.690431117
Shao, 2005, A thermally self-sustained micro solid-oxide fuel-cell stack with high power density, Nature, 435, 795, 10.1038/nature03673
Wu MH, Yetter RA and Yang V. Development and characterization of ceramic micro chemical propulsion and combustion systems, 46th AIAA aerospace sciences meeting and exhibit, AIAA-2008-966; 2008.
Zhang, 2004, MEMS-Based solid propellant microthruster design, simulation, fabrication, and testing, Journal of Microelectromechanical Systems, 13, 165, 10.1109/JMEMS.2004.825309
London, 2001, Microfabrication of a high pressure bipropellant rocket engine, Sensors and Actuators A-Physical, 92, 351, 10.1016/S0924-4247(01)00571-4
Lewis, 2000, Digital micropropulsion, Sensor and Actuators A-physical, 80, 143, 10.1016/S0924-4247(99)00260-5
Mehra, 2000, A six-wafer combustion system for a silicon micro gas turbine engine, Journal of Microelectromechanical Systems, 9, 517, 10.1109/84.896774
Epstein AH, Senturia SD, Al-Midani O, Anathasuresh G, Ayon, A, Breuer K, et al. Micro-heat engines, gas turbines, and rocket engines – the MIT microengine project, 28th Fluid Dynamics Conference, AIAA-1997-1773; 1997.
Yang W. MEMS free-piston knock engine. Poster presentation, 28th international symposium on combustion; 2000.
Aichlmayr, 2002, Miniature free-piston homogeneous charge compression ignition engine-compressor concept Part I: performance estimation and design considerations unique to small dimensions, Chemical Engineering Science, 57, 4161, 10.1016/S0009-2509(02)00256-7
Dahm WA, Ni J, Mayor R, Qiao G, Dyer S, Benjamin A, et al. Micro internal combustion swing engine (MICSE) for portable power generation systems, 40th AIAA aerospace sciences meeting and exhibit, AIAA-2002-722; 2002.
Annen KD, Stickler DB and Kebabian PL. Miniature generator, US Patent 664250; 2002.
Davy, 1817, Some researches on flame, Philosophical Transactions of the Royal Society of London, 45, 10.1098/rstl.1817.0008
Zhang, 2005, Development of a low-temperature co-fired ceramic solid propellant microthruster, Journal of Micromechanics and Microengineering, 15, 944, 10.1088/0960-1317/15/5/007
Galie P, Xu B and Ju Y. Kinetic enhancement of mesoscale combustion by using a novel nested doll combustor, 45th AIAA aerospace sciences meeting and exhibit, AIAA-2007-576; 2007.
Weinberg FJ. The first half-million years of combustion research and today’s burning problems. Symposium (International) on combustion 1975;15(1):1–17.
Jones, 1978, Combustion in heat exchangers, Proceedings of the Royal Society of London A, 360, 97, 10.1098/rspa.1978.0059
Takeno, 1979, An excess enthalpy flame theory, Combustion Science and Technology, 20, 73, 10.1080/00102207908946898
Ronney, 2003, Analysis of non-adiabatic heat-recirculating combustors, Combustion and Flame, 135, 421, 10.1016/j.combustflame.2003.07.003
Ju, 2003, An analysis of sub-limit flame dynamics using opposite propagating flames in mesoscale channels, Combustion and Flame, 133, 483, 10.1016/S0010-2180(03)00058-0
Vican, 2002, Development of a microreactor as a thermal source for microelectromechanical systems power generation, Proceedings of the Combustion Institute, 29, 909, 10.1016/S1540-7489(02)80115-8
Sitzki L, Borer K, Wussow S, Schuster E, Maruta K, Ronney PD, et al. Combustion in microscale heat-recirculating burners, 39th aerospace sciences meeting and exhibit, AIAA-2001-1087; 2001.
Maruta K, Takeda K, Sitzki L, Borer K, Ronney PD, Wussow S, et al. Catalytic combustion in microchannel for MEMS power generation. The third Asia-Pacific conference on combustion; 2001. pp. 219–22.
Kyritsis, 2002, Mesoscale power generation by a catalytic combustor using electrosprayed liquid hydrocarbons, Proceedings of the Combustion Institute, 29, 965, 10.1016/S1540-7489(02)80122-5
Miller F, Struk P, Dietrich D, T’ien J, Mellish B and Johnston M. Upstream catalytic flame propagation in a platinum channel: a comparison of model and experiment. In: Proceedings of 5th US combustion meeting; 2007. pp. 3265–77.
Daou, 2002, Influence of conductive heat-losses on the propagation of premixed flames in channels, Combustion and Flame, 128, 321, 10.1016/S0010-2180(01)00362-5
Daou, 2001, Flame propagation in Poiseuille flow under adiabatic conditions, Combustion and Flame, 124, 337, 10.1016/S0010-2180(00)00209-1
Daou, 2002, The thick flame asymptotic limit and Damköhler’s hypothesis, Combustion Theory and Modelling, 6, 141, 10.1088/1364-7830/6/1/308
Ju, 2006, Effects of channel width and Lewis number on the multiple flame regimes and propagation limits in mesoscale, Combustion Science and Technology, 178, 1723, 10.1080/00102200600788643
Ju, 2002, Dynamics and flammability limit of stretched premixed flames stabilized by a hot wall, Proceedings of the Combustion Institute, 29, 949, 10.1016/S1540-7489(02)80120-1
Ju, 2005, Theoretical and experimental studies on mesoscale flame propagation and extinction, Proceedings of the Combustion Institute, 30, 2445, 10.1016/j.proci.2004.08.234
Maruta, 2005, Characteristics of combustion in a narrow channel with a temperature gradient, Proceedings of the Combustion Institute, 30, 2429, 10.1016/j.proci.2004.08.245
Nakamura, 2009, Bifurcations of stretched premixed flame stabilized by a hot wall, Proceedings of the Combustion Institute, 32, 1367, 10.1016/j.proci.2008.05.045
Leach, 2005, The role of structural heat exchange and heat loss in the design of efficient silicon micro-combustors, Proceedings of the Combustion Institute, 30, 2437, 10.1016/j.proci.2004.08.229
Maruta, 2004, Characteristics of microscale combustion in a narrow heated channel. Combustion, Explosion and Shock Waves, 40, 516, 10.1023/B:CESW.0000041403.16095.a8
Richecoeur, 2005, Experimental study of flame stabilization in low Reynolds and Dean number flows in curved mesoscale ducts, Proceedings of the Combustion Institute, 30, 2419, 10.1016/j.proci.2004.08.015
Evans, 2009, Operational regimes of rich methane and propane/oxygen flames in mesoscale non-adiabatic ducts, Proceedings of the Combustion Institute, 32, 3107, 10.1016/j.proci.2008.06.089
Xu, 2007, Experimental study of spinning combustion in a mesoscale divergent channel, Proceedings of the Combustion Institute, 31, 3285, 10.1016/j.proci.2006.07.241
Miesse, 2005, Diffusion flame instabilities in a 0.75 mm non-premixed microburner, Proceedings of the Combustion Institute, 30, 2499, 10.1016/j.proci.2004.08.140
Xu, 2009, Studies on non-premixed flame streets in a mesoscale channel, Proceedings of the Combustion Institute, 32, 1375, 10.1016/j.proci.2008.07.027
Jackson, 2007, Flames in narrow circular tubes, Proceedings of the Combustion Institute, 31, 955, 10.1016/j.proci.2006.07.032
Chen, 2011, Three-dimensional effects in counterflow heat-recirculating combustors, Proceedings of the Combustion Institute, 33, 3285, 10.1016/j.proci.2010.06.081
Xu, 2005, Concentration slip and its impact on heterogeneous combustion in a micro scale chemical reactor, Chemical Engineering Science, 60, 3561, 10.1016/j.ces.2005.01.022
Xu, 2006, Theoretical and numerical studies of non-equilibrium slip effects on a catalytic surface, Combustion Theory and Modelling, 10, 961, 10.1080/13647830600792313
Aghalayam, 1998, The role of radical wall quenching in flame stability and wall heat flux: hydrogen-air mixtures, Combustion Theory and Modelling, 2, 515, 10.1088/1364-7830/2/4/010
Whitehead JC, Dittman MD and Ledebuhr AG. Progress toward hydrogen peroxide micropropulsion. 13th annual American Institute of Aeronautics and Astronautics, UCRL-JC-135319; 1999.
Janson SW, Helvajian H, Breuer K. MEMS, microengineering and aerospace systems. 30th AIAA fluid dynamics conference, AIAA-1999-3802; 1999.
Epstein, 2004, Millimeter-scale, micro-electro-mechanical systems gas turbine engines, Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, 126, 205, 10.1115/1.1739245
Chia, 2007, The development of a micropower (micro-thermophotovoltaic) device, Journal of Power Sources, 165, 455, 10.1016/j.jpowsour.2006.12.006
Ohadi, 2001, High temperature heat exchangers and microscale combustion systems: applications to thermal system miniaturization, Experimental Thermal and Fluid Science, 25, 207, 10.1016/S0894-1777(01)00069-3
Wu, 2007, Combustion in meso-scale vortex chambers, Proceedings of the Combustion Institute, 31, 3235, 10.1016/j.proci.2006.08.114
McCrink M, Plumlee DG, Moll AJ and Steciak J. Fabrication of a monopropellant micro-nozzle using Low temperature co-fired ceramics. IMAPS/ACerS international conference and exhibition on ceramic interconnect and ceramic microsystems technologies (CICMT); 2006.
Volchko, 2006, Catalytic combustion of rich methane/oxygen mixtures for micropropulsion applications, Journal of Propulsion and Power, 22, 684, 10.2514/1.19809
Younger DW, Lu ST, Choueiri E, Neidert JB, Black III RE, Graham KJ, et al. MEMS mega-pixel micro-thruster arrays for small satellite stationkeeping. in Proceedings of the 14th annual/USU conference on small satellites, SSC00-X-2; 2000.
Yetter RA, Yang V, Wang Z, Wang Y, Milius D, Peluse M, et al. Development of meso and micro scale liquid propellant thrusters, 41st aerospace sciences meeting and exhibit, AIAA-2003-676; 2003.
Moll AJ. Microsystems and microfluidics: why not LTCC?, IMAPS/ACerS 3rd international conference and exhibition on ceramic interconnect and ceramic microsystems technologies (CICMT); 2007.
Epstein AH, Senturia SD, Anathasuresh G, Ayon A, Breuer K, Chen KS, et al. Power MEMS and microengines, TRANSDUCERS ’97, 1997 international conference on solid state sensors and actuators; 1997. pp. 753–6.
Mehra, 1998
Spadaccini, 2003, Preliminary development of a hydrocarbon-fueled catalytic micro-combustor, Sensors and Actuators, A: Physical, 103, 219, 10.1016/S0924-4247(02)00335-7
Isomura, 2005, Development of high-speed micro-gas bearings for three-dimensional micro-turbo machines, Journal of Micromechanics and Microengineering, 15, S222, 10.1088/0960-1317/15/9/S08
Tanaka S, Hikichi K, Togo S, Murayama M, Hirose Y, Sakurai T, et al., World’s smallest gas turbine establishing Brayton cycle, the 7th international workshop on micro and nanotechnology for power generation and energy conversion applications (Power MEMS 2007); 2007. pp. 359–62.
Fu, 2001
Fu K, Knobloch, Cooley BA, Walther DC, Fernandez-Pello C, Liepmann D, et al. Microscale combustion research for applications to MEMS rotary IC engine. In: Proceedings of the national heat transfer conference; 2001.
Fu, 1999
Fu K, Knobloch AJ, Martinez FC, Walther DC, Fernandez-Pello C, Pisano AP, et al. Design and fabrication of a silicon-based MEMS rotary engine. In: Proceedings of 2001 ASME international mechanical engineering congress and exposition, MEMS-23925; 2001.
Hege, 2006
Aichlmayr, 2003, Micro-HCCI combustion: experimental characterization and development of a detailed chemical kinetic model with coupled piston motion, Combustion and Flame, 135, 227, 10.1016/S0010-2180(03)00161-5
Gu Y, Mayor JR and Dahm WJA. Turbulence-augmented minimization of combustion time in mesoscale internal combustion engines, 44th AIAA aerospace sciences meeting and exhibit, AIAA-2006-1350; 2006.
Cohen AL, Ronney PD, Frodis U, Sitzki L, Meiburg EH and Wussow S. Microcombustor and combustion-based thermoelectric microgenerator; 2003, US patent. 6613972.
Weinberg, 2002, On thermoelectric power conversion from heat recirculating combustion systems, Proceedings of the Combustion Institute, 29, 941, 10.1016/S1540-7489(02)80119-5
Kyritsis, 2004, Optimization of a catalytic combustor using electrosprayed liquid hydrocarbons for mesoscale power generation, Combustion and Flame, 139, 77, 10.1016/j.combustflame.2004.06.010
Deng, 2007, Liquid fuel microcombustor using microfabricated multiplexed electrospray sources, Proceedings of the Combustion Institute, 31, 2239, 10.1016/j.proci.2006.08.080
Kim, 2005, Flame stabilization and emission of small Swiss-roll combustors as heaters, Combustion and Flame, 141, 229, 10.1016/j.combustflame.2005.01.006
Kim, 2007, Development and scale effects of small Swiss-roll combustors, Proceedings of the Combustion Institute, 31, 3243, 10.1016/j.proci.2006.08.077
Yuasa, 2005, Concept and combustion characteristics of ultra-micro combustors with premixed flame, Proceedings of the Combustion Institute, 30, 2455, 10.1016/j.proci.2004.08.207
Yoshida, 2006, High-energy density miniature thermoelectric generator using catalytic combustion, Journal of Microelectromechanical Systems, 15, 195, 10.1109/JMEMS.2005.859202
Okamasa, 2006, Development of a micro catalytic combustor using high-precision ceramic tape casting, Journal of Micromechanics and Microengineering, 16, S198, 10.1088/0960-1317/16/9/S05
Suzuki Y, Horii Y, Kasagi N and Matsuda S. Micro catalytic combustor with tailored porous alumina. In: Proceedings of the IEEE international conference on micro electro mechanical systems (MEMS); 2004. pp. 312–5.
Kamijo, 2009, High-temperature micro catalytic combustor with Pd/nano-porous alumina, Proceedings of the Combustion Institute, 32, 3019, 10.1016/j.proci.2008.06.118
Karim, 2008, Portable power production from methanol in an integrated thermoeletric/microreactor system, Journal of Power Sources, 179, 113, 10.1016/j.jpowsour.2007.12.119
Federici, 2006, Catalytic microcombustors with integrated thermoelectric elements for portable power production, Journal of Power Sources, 161, 1469, 10.1016/j.jpowsour.2006.06.042
Sirignano, 2002, Miniature-scale liquid-fuel-film combustor, Proceedings of the Combustion Institute, 29, 925, 10.1016/S1540-7489(02)80117-1
Pham, 2007, Flame structure in small-scale liquid film combustors, Proceedings of the Combustion Institute, 31, 3269, 10.1016/j.proci.2006.08.030
Li, 2008, Progress in miniature liquid film combustors: double chamber and central porous fuel inlet designs, Experimental Thermal and Fluid Science, 32, 1118, 10.1016/j.expthermflusci.2008.01.005
Yang, 2004, A prototype microthermophotovoltaic power generator, Applied Physics Letters, 84, 3864, 10.1063/1.1751614
Deshmukh, 2005, Effect of flow configuration on the operation of coupled combustor/reformer microdevices for hydrogen production, Chemical Engineering Science, 60, 5718, 10.1016/j.ces.2005.04.082
Yoshida, 2006, A micro fuel reformer integrated with a combustor and a microchannel evaporator, Journal of Micromechanics and Microengineering, 16, S191, 10.1088/0960-1317/16/9/S04
Federici, 2009, Single channel and heat recirculation catalytic microburners: an experimental and computational fluid dynamics study, Proceedings of the Combustion Institute, 32, 3011, 10.1016/j.proci.2008.07.005
Kim, 2007, Micro catalytic combustor as a heat source for micro endothermic reactors, Diffusion and Defect Data Pt. B Solid State Phenomena, 119, 223, 10.4028/www.scientific.net/SSP.119.223
Li, 2009, Performance of a mesoscale liquid fuel-film combustion-driven TPV power system, Progress in Photovoltaics Research and Applications, 17, 327, 10.1002/pip.877
Boyarko, 2005, Catalyzed combustion of hydrogen-oxygen in platinum tubes for micro-propulsion applications, Proceedings of the Combustion Institute, 30, 2481, 10.1016/j.proci.2004.08.203
Chen, 2003, A homogeneously catalyzed micro-chemical thruster, Sensors and Actuators A-Physical, 108, 149
Lewis, 1987
Zeldovich, 1985
Spalding, 1957, A Theory of inflammability limits and flame-quenching, Proceedings of the Royal Society of London. Series A, 240, 83, 10.1098/rspa.1957.0068
Joulin, 1979, Linear stability analysis of nonadiabatic flames: diffusional-thermal model, Combustion and Flame, 35, 139, 10.1016/0010-2180(79)90018-X
Strehlow, 1988, The effect of gravity on premixed flame propagation and extinction in a vertical standard flammability tube, Symposium (International) on Combustion, 21, 1899, 10.1016/S0082-0784(88)80426-0
Ronney, 1988, On the mechanisms of flame propagation limits and extinguishment-processes at microgravity, Symposium (International) on Combustion, 22, 1615, 10.1016/S0082-0784(89)80173-0
Law, 1990, A kinetic criterion of flammability limits: the C–H–O-inert system, Symposium (International) on Combustion, 23, 413, 10.1016/S0082-0784(06)80286-9
Sibulkin, 1990, Prediction of flammability limit of an unconfined premixed gas in the absence of gravity, Combustion and Flame, 82, 334, 10.1016/0010-2180(90)90006-D
Lakshmisha, 1990, On the flammability limit and heat loss in flames with detailed chemistry, Symposium (International) on Combustion, 23, 433, 10.1016/S0082-0784(06)80288-2
Maruta, 1996, Experimental study on methane-air premixed flame extinction at small stretch rates in microgravity, Symposium (International) on Combustion, 26, 1283, 10.1016/S0082-0784(96)80346-8
Platt, 1990
Sung, 1996, Extinction mechanisms of near-limit premixed flames and extended limits of flammability, Symposium (International) on Combustion, 26, 865, 10.1016/S0082-0784(96)80296-7
Guo, 1997, Niioka T and Liu F, Radiation extinction limit of counterflow premixed lean methane-air flames, Combustion and Flame, 109, 639, 10.1016/S0010-2180(97)00050-3
Ju, 1997, On the extinction limit and flammability limit of non-adiabatic stretched methane-air premixed flames, Journal of Fluid Mechanics, 342, 315, 10.1017/S0022112097005636
Holman, 2001
Ferguson, 1977, On laminar flame quenching and its application to spark ignition engines, Combustion and Flame, 28, 197, 10.1016/0010-2180(77)90025-6
Kurdyumov, 2002, Lewis number effect on the propagation of premixed laminar flames in narrow open ducts, Combustion and Flame, 128, 382, 10.1016/S0010-2180(01)00358-3
Kuo, 2007, Numerical modeling of non-adiabatic heat-recirculating combustors, Proceedings of the Combustion Institute, 31, 3277, 10.1016/j.proci.2006.08.082
Babkin, 1983, Fiz. Goreniya Vzryva, 19, 17
Williams, 1985
Joulin, 1986, On radiation-affected flame propagation in gaseous-mixtures seeded with inert particles, Combustion Science and Technology, 47, 299, 10.1080/00102208608923879
Zamashchikov, 1997, Experimental investigation of gas combustion regimes in narrow tubes, Combustion and Flame, 108, 357, 10.1016/S0010-2180(96)00169-1
Pizza, 2008, Dynamics of premixed hydrogen/air flames in microchannels, Combustion and Flame, 152, 433, 10.1016/j.combustflame.2007.07.013
Pizza, 2008, Dynamics of premixed hydrogen/air flames in mesoscale channels, Combustion and Flame, 155, 2, 10.1016/j.combustflame.2008.08.006
Raimondeau, 2002, Modeling of high-temperature microburners, Proceedings of the Combustion Institute, 29, 901, 10.1016/S1540-7489(02)80114-6
Norton, 2003, Combustion characteristics and flame stability at the microscale: a CFD study of premixed methane/air mixtures, Chemical Engineering Science, 58, 4871, 10.1016/j.ces.2002.12.005
Norton, 2004, A CFD study of propane/air microflame stability, Combustion and Flame, 138, 97, 10.1016/j.combustflame.2004.04.004
Kaisare, 2007, Optimal reactor dimensions for homogeneous combustion in small channels, Catalysis Today, 120, 96, 10.1016/j.cattod.2006.07.036
Marbach T and Agrawal A. A meso-scale combustor using annular porous inert media for heat recirculation. 43rd AIAA aerospace sciences meeting and exhibit, AIAA-2005-942; 2005.
Ju Y and Xu B. Studies of the effects of radical quenching and flame stretch on mesoscale combustion. 44th AIAA aerospace sciences meeting and exhibit, AIAA-2006-1351; 2006.
Masel, 1996
Kim, 2006, Effects of thermal and chemical surface-flame interaction on flame quenching, Combustion and Flame, 146, 19, 10.1016/j.combustflame.2006.04.012
Tsuboi, 2009, Lower limit of weak flame in a heated channel, Proceedings of the Combustion Institute, 32, 3075, 10.1016/j.proci.2008.06.151
Tsuboi, 2008, Extinction characteristics of premixed flame in heated microchannel at reduced pressures, Combustion Science and Technology, 180, 2029, 10.1080/00102200802269723
Oshibe, 2010, Stabilized three-stage oxidation of DME/air mixture in a micro flow reactor with a controlled temperature profile, Combustion and Flame, 157, 1572, 10.1016/j.combustflame.2010.03.004
Yamamoto, 2011, Stationary three-stage oxidation of a gaseous n-heptane/air mixture in a micro flow reactor with a controlled temperature profile, Proceedings of the Combustion Institute, 33, 3259, 10.1016/j.proci.2010.05.004
Ahn, 2005, Gas-phase and catalytic combustion in heat-recirculating burners, Proceedings of the Combustion Institute, 30, 2463, 10.1016/j.proci.2004.08.265
Maruta, 2002, Extinction limits of catalytic combustion in microchannels, Proceedings of the Combustion Institute, 29, 957, 10.1016/S1540-7489(02)80121-3
Deutschmann, 1996, Numerical modeling of catalytic ignition, Symposium (International) on Combustion, 26, 1747, 10.1016/S0082-0784(96)80400-0
Lyubovsky, 2003, Catalytic combustion over platinum group catalysts: fuel-lean versus fuel-rich operation, Catalysis Today, 83, 71, 10.1016/S0920-5861(03)00217-7
Zerkle, 2000, Understanding homogeneous and heterogeneous contributions to the platinum-catalyzed partial oxidation of ethane in a short-contact-time reactor, Journal of Catalysis, 196, 18, 10.1006/jcat.2000.3009
Appel, 2002, An experimental and numerical investigation of homogeneous ignition in catalytically stabilized combustion of hydrogen/air mixtures over platinum, Combustion and Flame, 128, 340, 10.1016/S0010-2180(01)00363-7
Schwiedernoch, 2002, Experimental and numerical investigation of the ignition of methane combustion in a platinum-coated honeycomb monolith, Proceedings of the Combustion Institute, 29, 1005, 10.1016/S1540-7489(02)80127-4
Norton, 2004, Fabrication of single-channel catalytic microburners: effect of confinement on the oxidation of hydrogen/air mixtures, Industrial & Engineering Chemistry Research, 43, 4833, 10.1021/ie049798b
Karagiannidis, 2007, Hetero-/homogeneous combustion and stability maps in methane-fueled catalytic microreactors, Proceedings of the Combustion Institute, 31, 3309, 10.1016/j.proci.2006.07.121
Deutschmann, 2000, Hydrogen assisted catalytic combustion of methane on platinum, Catalysis Today, 59, 141, 10.1016/S0920-5861(00)00279-0
Warnatz, 1996
Chen, 2007, Effects of catalytic walls on hydrogen/air combustion inside a micro-tube, Applied Catalysis A: General, 332, 89, 10.1016/j.apcata.2007.08.011
Miller, 1989, Mechanism and modeling of nitrogen chemistry in combustion, Progress in Energy and Combustion Science, 15, 287, 10.1016/0360-1285(89)90017-8
Chao, 2004, Operational characteristics of catalytic combustion in a platinum microtube, Combustion Science and Technology, 176, 1755, 10.1080/00102200490487599
Fassihi, 1993, A theoretical and experimental-study of catalytic ignition in the hydrogen oxygen reaction on platinum, Journal of Catalysis, 141, 438, 10.1006/jcat.1993.1153
Norton, 2005, Hydrogen assisted self-ignition of propane/air mixtures in catalytic microburners, Proceedings of the Combustion Institute, 30, 2473, 10.1016/j.proci.2004.08.188
Kaisare, 2009, Comparison of ignition strategies for catalytic microburners, Proceedings of the Combustion Institute, 32, 3027, 10.1016/j.proci.2008.06.132
Chen, 2008, Enhancement of hydrogen reaction in a micro-channel by catalyst segmentation, International Journal of Hydrogen Energy, 33, 2586, 10.1016/j.ijhydene.2008.02.071
Karagiannidis, 2010, Numerical investigation on the start-up of methane-fueled catalytic microreactors, Combustion and Flame, 157, 1400, 10.1016/j.combustflame.2010.01.008
Cho, 2009, Demonstration of an external combustion micro-heat engine, Proceedings of the Combustion Institute, 32, 3099, 10.1016/j.proci.2008.07.017
Whalen, 2003, Design, fabrication and testing of the P3 micro heat engine, Sensors and Actuators A-Physical, 104, 290, 10.1016/S0924-4247(03)00032-3
Tameda K and Fujita O. A research on room temperature startability of small size DME catalytic combustor. The Seventh JSME-KSME thermal and fluids engineering conference; 2008. p. 98.
Bird, 1994
Kee, 2005, Solid-oxide fuel cells with hydrocarbon fuels, Proceedings of the Combustion Institute, 30, 2379, 10.1016/j.proci.2004.08.277
Pan, 1999, Determination of slip coefficient for rarefied gas flows using direct simulation Monte Carlo, Journal of Micromechanics and Microengineering, 9, 89, 10.1088/0960-1317/9/1/312
McNenly, 2002
Chou, 2000, Numerical studies of methane catalytic combustion inside a monolith honeycomb reactor using multi-step surface reactions, Combustion Science and Technology, 150, 27, 10.1080/00102200008952116
Lee, 1987, Dynamics of the activated dissociative chemisorption of CH4 and implication for the pressure gap in catalysis: a molecular beam-high resolution electron energy loss study, Journal of Chemical Physics, 87, 2724, 10.1063/1.453060
Glumac N. Personal communication; 2003.
Bertagnolli, 1996, Temperature profile measurements in stagnation-flow, diamond-forming flames using hydrogen cars spectroscopy, Symposium (International) on Combustion, 26, 1825, 10.1016/S0082-0784(96)80003-8
Shankar, 2003
Kramers, 1943, On the slip of a diffusing gas mixture along a wall, Physica, 10, 699, 10.1016/S0031-8914(43)80018-5
Papadopoulos, 1996, Direct simulation of concentration creep in a binary gas-filled enclosure, Physics of Fluids, 8, 3179, 10.1063/1.869094
Scott CD. Wall boundary equations with slip and catalysis for multicomponent, nonequilibrium gas flows. NASA TM X-58111; 1973.
Gupta, 1985, Slip-boundary equations for multicomponent nonequilibrium airflow, NASA Technical Paper, 2452
Rosner, 1996, Jump, slip, and creep boundary conditions at nonequilibrium gas/solid interfaces, Industrial & Engineering Chemistry Research, 35, 3210, 10.1021/ie9600351
Minaev, 2007, Nonlinear dynamics of flame in a narrow channel with a temperature gradient, Combustion Theory and Modelling, 11, 187, 10.1080/13647830600649364
Fan, 2009, Experimental study of micro-scale premixed flame in quartz channels, Proceedings of the Combustion Institute, 32, 3083, 10.1016/j.proci.2008.06.219
Kessler, 2008, Ignition and transient dynamics of sub-limit premixed flames in microchannels, Combustion Theory and Modelling, 12, 809, 10.1080/13647830801956295
Gamezo VN and Oran ES. Flame acceleration in narrow tubes: Applications for micropropulsion in low-gravity environments, 43rd AIAA aerospace sciences meeting and exhibit, AIAA-2005-0540; 2005.
Pizza, 2010, Three-dimensional simulations of premixed hydrogen/air flames in micro tubes, Journal of Fluid Mechanics, 658, 463, 10.1017/S0022112010001837
Nayagam, 2000, Rotating spiral edge flames in von Karman swirling flows, Physical Review Letters, 84, 479, 10.1103/PhysRevLett.84.479
Pearlman, 1994, Self-organized spiral and circular waves in premixed gas flames, Journal of Chemical Physics, 101, 2632, 10.1063/1.467636
Robbins, 2004, Spiral dynamics of pulsating methane–oxygen flames on a circular burner, Chaos, 14, 467, 10.1063/1.1688532
Fan, 2008, Regime diagrams and characteristics of flame patterns in radial microchannels with temperature gradients, Combustion and Flame, 153, 479, 10.1016/j.combustflame.2007.10.015
Fan, 2007, Experimental study on flame pattern formation and combustion completeness in a radial microchannel, Journal of Micromechanics and Microengineering, 17, 2398, 10.1088/0960-1317/17/12/002
Kumar, 2008, Appearance of target pattern and spiral flames in radial microchannels with CH4-air mixtures, Physics of Fluids, 20, 024101, 10.1063/1.2836670
Kumar, 2007, On the formation of multiple rotating pelton-like flame structures in radial microchannels with lean methane - air mixtures, Proceedings of the Combustion Institute, 31, 3261, 10.1016/j.proci.2006.07.174
Kumar, 2007, Pattern formation of flames in radial microchannels with lean methane-air mixtures, Physical Review E, 75, 016208, 10.1103/PhysRevE.75.016208
Fan, 2009, Experimental and numerical investigations of flame pattern formations in a radial microchannel, Proceedings of the Combustion Institute, 32, 3059, 10.1016/j.proci.2008.06.092
Minaev, 2009, Splitting flames in a narrow channel with a temperature gradient in the walls, Combustion, Explosion, and Shock Waves, 45, 119, 10.1007/s10573-009-0016-6
Fan, 2009, Dynamic behavior of splitting flames in a heated channel, Combustion, Explosion, and Shock Waves, 45, 245, 10.1007/s10573-009-0032-6
Dellimore K and Cadou C. Fuel-air mixing challenges in micro-power systems. 42nd AIAA aerospace sciences meeting and exhibit 2004: AIAA-2004-301.
Cheng, 2005, Experimental and numerical investigation of microscale hydrogen diffusion flames, Proceedings of the Combustion Institute, 30, 2489, 10.1016/j.proci.2004.07.025
Matta, 2002, Characteristics of microscale diffusion flames, Proceedings of the Combustion Institute, 29, 933, 10.1016/S1540-7489(02)80118-3
Kuwana, 2009, Extinction of laminar jet diffusion microflames, Proceedings of the Combustion Institute, 32, 3115, 10.1016/j.proci.2008.06.013
Diesel Net, 2009
Dec, 2009, Advanced compression-ignition engines–understanding the in-cylinder processes, Proceedings of the Combustion Institute, 32, 2727, 10.1016/j.proci.2008.08.008
Zhao, 2003, Homogeneous charge compression ignition (HCCI) engines, SAE International
Christensen, 1998, Influence of mixture quality on homogeneous charge compression ignition, SAE Transactions, 107, 982454, 10.4271/982454
Iwabuchi, 1999, Trial of new concept diesel combustion system – premixed compression-ignition combustion, SAE Transactions, 108, 10.4271/1999-01-0185
Christensen, 1999, Demonstrating the multi-fuel capability of a homogeneous charge compression ignition engine with variable compression ratio, SAE Transactions, 108, 10.4271/1999-01-3679
Kaneko, 2002, Expansion of the operating range with in-cylinder water injection in a premixed charge compression ignition engine, SAE Transactions, 111, 10.4271/2002-01-1743
Dec, 1998, PLIF imaging of NO formation in a DI diesel engine, SAE Transactions, 107, 980147, 10.4271/980147
Weißbäck, 2003, Alternative combustion - an approach for future HSDI diesel engines, MTZ Worldwide, 64, 10.1007/BF03227611
Kook, 2005, The influence of charge dilution and injection timing on low-temperature diesel combustion and emissions, SAE Transactions, 114, 10.4271/2005-01-3837
Ju, 2011, Multi-timescale modeling of ignition and flame regimes of n-heptane-air mixtures near spark assisted homogeneous charge compression ignition conditions, Proceedings of the Combustion Institute, 33, 1245, 10.1016/j.proci.2010.06.110
Holladay, 2004, Review of developments in portable hydrogen production using microreactor technology, Chemical Reviews, 104, 4767, 10.1021/cr020721b
Pattekar, 2004, A microreactor for hydrogen production in micro fuel cell applications, Journal of Microelectromechanical Systems, 13, 7, 10.1109/JMEMS.2004.823224
Takahashi S and Wakai K. Microcombustor with a sintered porous catalytic layer. 45th AIAA/ASME/SAE/ASEE joint propulsion conference and exhibit, AIAA-2009-5246; 2009.
Kawamura, 2006, A miniaturized methanol reformer with Si-based microreactor for a small PEMFC, Chemical Engineering Science, 61, 1092, 10.1016/j.ces.2005.08.014
Ryi, 2005, Novel micro fuel processor for PEMFCs with heat generation by catalytic combustion, Chemical Engineering Journal, 113, 47, 10.1016/j.cej.2005.08.008
Lerou, 2010, Microchannel reactor architecture enables greener processes, Chemical Engineering Science, 65, 380, 10.1016/j.ces.2009.07.020
Esakov I, Grachev L, Khodataev K, Lavrov P and Ravaev A. Boundary- layer control based on localized plasma generation: development of the microwave system. 48th AIAA aerospace sciences meeting 2010: AIAA-2010-1003.
Göksel, 2007, vol. 95
Manesh, 2010, Experimental flame speed in multi-layered nano-energetic materials, Combustion and Flame, 157, 476, 10.1016/j.combustflame.2009.07.011
Son, 2007, Introduction: nanoscale composite energetic materials, Journal of Propulsion and Power, 23, 643, 10.2514/1.31508