Micromechanical modelling of mortar joints and brick-mortar interfaces in masonry Structures: A review of recent developments

Lotfi, 1994, Interface model applied to fracture of masonry structures, J Struct Eng, 10.1061/(ASCE)0733-9445(1994)120:1(63) Lourenço PB. Computational strategies for masonry structures. Delf: Delft University of Technology; 1996. ISBN 90-407-1221-2. Gambarotta, 1997, Damage models for the seismic response of brick masonry shear walls. Part I: the mortar joint model and its applications, Earthquake Eng Struct Dyn Mehrabi, 1997, Finite element modeling of masonry-infilled RC frames, J Struct Eng, 10.1061/(ASCE)0733-9445(1997)123:5(604) Sacco, 2010, Interface elements for the analysis of masonry structures, Int J Comput Meth Eng Sci Mech, 10.1080/15502287.2010.516793 Stavridis, 2010, Finite-element modeling of nonlinear behavior of masonry-infilled RC frames, J Struct Eng, 10.1061/(ASCE)ST.1943-541X.116 Zhai, 2017, Numerical simulation of masonry-infilled RC frames using XFEM, J Struct Eng, 143, 1, 10.1061/(ASCE)ST.1943-541X.0001886 Maekawa, 2009 Lourenço PB. Recent advances in masonry modelling: micromodelling and homogenisation. In: Galvanetto U, Aliabadi MHF, editors. Multiscale modeling in soild mechanics: computational approaches, London; 2009. Mann W, Müller H. Failure of shear-stressed masonry- an enlarged theory, tests and application to shear walls. In: Proceedings of the British Ceramic Society; 1982, p. 223–35. van der Pluijm, R. Out-of-plane bending of masonry: behaviour and strength. Technical University of Eindhoven; 1998. doi: 10.6100/IR528212. van Mier, 1997 Vermeltfoort, 2007, Brick-mortar interface effects in masonry under compression, Can J Civ Eng, 34, 1475, 10.1139/L07-067 Burland, 1990, On the compressibility and shear strength of natural clays, Géotechnique, 10.1680/geot.1990.40.3.329 Yu, 2007, A critical state framework for modelling bonded geomaterials, Geomech Geoeng, 2, 61, 10.1080/17486020601164275 Pestana, 2006, Small-strain behavior of granular soils. I: model for cemented and uncemented sands and gravels, J Geotech Geoenviron Eng, 132, 1071, 10.1061/(ASCE)1090-0241(2006)132:8(1071) Saxena, 1988, Dynamic moduli and damping ratios for cemented sands at low strains, Can Geotech J, 10.1139/t88-036 Chang, 1992, Effect of Particle contact bond on shear modulus, J Geotech Eng, 10.1061/(ASCE)0733-9410(1992)118:8(1216) Leroueil, 1990, The general and congruent effects of structure in natural soils and weak rocks, Geotechnique, 40, 467, 10.1680/geot.1990.40.3.467 Huang, 1993, Effects of cement and density on on an artificially cemented sand, 554 Roscoe, 1963, Yielding of clays in states wetter than critical, Géotechnique, 10.1680/geot.1963.13.3.211 Rowe PW. Theoretical meaning and observed values of deforrnalion parameters for soil. In: Proceedings of roscoe memorial symposium; 1971, p. 143–94. Green SJ, Swanson RS. Static constitutive relations for concrte. New Mexico; 1973. van der Pluijm R, Rutten H, Ceelen M. Shear behaviour of bed joints. In: 12th international brick/block masonry conference; 2000. doi: 10.1111/j.1743-6109.2012.02948.x. Huang, 1998, Properties of artificially cemented carbonate sand, J Geotech Geoenviron Eng, 10.1061/(ASCE)1090-0241(1998)124:6(492) Schnaid, 2001, Characterization of cemented sand in triaxial compression, J Geotech Geoenviron Eng, 127, 857, 10.1061/(ASCE)1090-0241(2001)127:10(857) Haeri, 2006, Effect of cement type on the mechanical behavior of a gravely sand, Geotech Geol Eng, 10.1007/s10706-004-7793-1 Wang, 2008, Characterization of cemented sand by experimental and numerical investigations, J Geotech Geoenviron Eng, 10.1061/(ASCE)1090-0241(2008)134:7(992) Porcino, 2017, Bonding degradation and stress–dilatancy response of weakly cemented sands, Geomech Geoeng, 10.1080/17486025.2017.1347287 Consoli, 2012, Parameters controlling stiffness and strength of artificially cemented soils, Géotechnique, 10.1680/geot.8.P.084 Cuccovillo, 1999, On the mechanics of structured sands, Geotechnique, 10.1680/geot.1999.49.6.741 Doanh, 2000, Minimum undrained strength of Hostun RF sand, Geotechnique, 50, 377, 10.1680/geot.2000.50.4.377 Vu, 2009, Experimental analysis of concrete behavior under high confinement: effect of the saturation ratio, Int J Solids Struct, 10.1016/j.ijsolstr.2008.10.015 Hofmann, 1986, Tests on the shear-bond behaviour in the bed-joints of masonry, Mas Int, 9, 1 Atkinson, 1989, Response of masonry bed joints in direct shear, J Struct Eng, 10.1061/(ASCE)0733-9445(1989)115:9(2276) van Zijl, 2004, Modeling masonry shear-compression: role of dilatancy highlighted, J Eng Mech, 10.1061/(ASCE)0733-9399(2004)130:11(1289) Fouchal, 2009, Contribution to the modelling of interfaces in masonry construction, Constr Build Mater, 10.1016/j.conbuildmat.2008.10.011 Lourenço, 2004, Shear testing of stack bonded masonry, Constr Build Mater, 10.1016/j.conbuildmat.2003.08.018 Alecci, 2013, Shear strength of brick masonry walls assembled with different types of mortar, Constr Build Mater, 10.1016/j.conbuildmat.2012.11.107 CEN. Methods of tests for masonry, Part3. Determination of initial shear strength; 1999. Plesha, 1987, Constitutive models for rock discontinuities with dilatancy and surface degradation, Int J Numer Anal Meth Geomech, 10.1002/nag.1610110404 Fafitis, 1992, A constitutive model for aggregate interlock shear based on micromechanics, J Energy Res Technol - ASME, 114, 235, 10.1115/1.2905947 Kwasniewski, 1997, Surface roughness evolution and mechanical behavior of rock joints under shear, Int J Rock Mech Mining Sci Geomech Abstr Lee, 2001, Influence of asperity degradation on the mechanical behavior of rough rock joints under cyclic shear loading, Int J Rock Mech Min Sci, 10.1016/S1365-1609(01)00060-0 Niktabar, 2017, Effect of rock joint roughness on its cyclic shear behavior, J Rock Mech Geotech Eng, 10.1016/j.jrmge.2017.09.001 Miranda Dias, 2007, Cracking due to shear in masonry mortar joints and around the interface between masonry walls and reinforced concrete beams, Constr Build Mater, 21, 446, 10.1016/j.conbuildmat.2005.07.016 Lourenço, 1997, Multisurface interface model for analysis of masonry structures, J Eng Mech, 10.1061/(ASCE)0733-9399(1997)123:7(660) Muir, 2004 Raous, 1999, A consistent model coupling adhesion, friction, and unilateral contact, Comput Methods Appl Mech Eng, 10.1016/S0045-7825(98)00389-2 Guiamatsia, 2014, A thermodynamics-based cohesive model for interface debonding and friction, Int J Solids Struct, 10.1016/j.ijsolstr.2013.10.032 Serpieri, 2015, A mixed-mode cohesive-zone model accounting for finite dilation and asperity degradation, Int J Solids Struct, 10.1016/j.ijsolstr.2015.04.005 Parrinello, 2016, A thermodynamically consistent cohesive-frictional interface model for mixed mode delamination, Eng Fract Mech, 10.1016/j.engfracmech.2015.12.001 Feenstra, 1991, numerical study on crack dilatancy i: models and stability analysis, Eng Mech, 10.1061/(ASCE)0733-9399(1991)117:4(733) Bazant, 1976, Instability, ductility, and size effect in strain-softening concrete, J Eng Mech Div Cervenka V, Gerstle KH. Inelastic analysis of reinforced concrete panels: part ii: experimental verification, vol. 3; 1972. Rots, 1989, Crack models for concrete: discrete or smeared? Fixed multi-directional or rotatin?, Heron Hillerborg, 1976, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cem Concr Res, 6, 773, 10.1016/0008-8846(76)90007-7 de Borst, 1989, Occurrence of spurious mechanisms in computations of strain-softening solids, Eng Comput, 6, 272, 10.1108/eb023782 Rots JG. Computational modeling of concrete fracture; 1988. Vonk R. Softening of concrete loaded in compression. Technishe Universitat Eindhoven; 1992. Stankowski, 1993, Fracture and slip of interfaces in cementitious composites. I: characteristics, J Eng Mech, 119, 292, 10.1061/(ASCE)0733-9399(1993)119:2(292) Koutromanos, 2011, Numerical modeling of masonry-infilled RC frames subjected to seismic loads, Comput Struct, 10.1016/j.compstruc.2011.01.006 Carol, 1997, Normal/shear cracking model: application to discrete crack analysis, J Eng Mech, 10.1061/(ASCE)0733-9399(1997)123:8(765) Feenstra, 1996, A composite plasticity model for concrete, Int J Solids Struct, 10.1016/0020-7683(95)00060-N Oliveira, 2004, Implementation and validation of a constitutive model for the cyclic behaviour of interface elements, Comput Struct, 10.1016/j.compstruc.2004.03.041 Chaimoon, 2007, Modeling of unreinforced masonry walls under shear and compression, Eng Struct, 29, 2056, 10.1016/j.engstruct.2006.10.019 Sutcliffe, 2001, Lower bound limit analysis of unreinforced masonry shear walls, Comput Struct, 10.1016/S0045-7949(01)00024-4 Giambanco, 1997, A cohesive interface model for the structural mechanics of block masonry, Mech Res Commun, 24, 503, 10.1016/S0093-6413(97)00055-4 Mroz, 1996, A interface model for analysis of deformation behaviour of discontinuities, Int J Numer Anal Meth Geomech, 20, 1, 10.1002/(SICI)1096-9853(199601)20:1<1::AID-NAG799>3.0.CO;2-L Shieh-Beygi, 2008, Numerical analysis of structural masonry: mesoscale approach, Comput Struct, 86, 1958, 10.1016/j.compstruc.2008.05.007 Cervenka, 1995, Discrete crack modeling in concrete structures, Fract Mech Concr Struct Cervenka, 1998, Mixed mode fracture of cementitious bimaterial interfaces; part II: numerical simulation, Eng Fract Mech Puntel, 2006, Fracture mechanics based model for joints under cyclic loading, J Eng Mech, 10.1061/(ASCE)0733-9399(2006)132:11(1151) Stupkiewicz, 2001, Modeling of friction and dilatancy effects at brittle interfaces for monotonic and cyclic loading, Theoret Appl Mech, 39, 707 López, 2008, Meso-structural study of concrete fracture using interface elements. I: Numerical model and tensile behavior, Mater Struct/Materiaux et Constructions Hassanzadeh, 1990, Determination of fracture zone properties in mixed mode I and II, Eng Fract Mech, 35, 845, 10.1016/0013-7944(90)90169-H Caballero, 2008, Consistent tangent formulation for 3D interface modeling of cracking/fracture in quasi-brittle materials, Comput Meth Appl Mech Eng, 197, 2804, 10.1016/j.cma.2008.01.011 Macorini, 2011, A non-linear interface element for 3D mesoscale analysis of brick-masonry structures, Int J Numer Meth Eng, 85, 1584, 10.1002/nme.3046 Alfano, 2006, Combining interface damage and friction in a cohesive-zone model, Int J Numer Meth Eng, 10.1002/nme.1728