Microelectrochemical corrosion study of super martensitic welds in chloride-containing media

Gooch, 1999 D. Carrouge, Transformations in supermartensitic stainless steels, Ph.D. thesis, University of Cambridge, Department of Materials Science and Metallurgy, England, 2002. Lippold, 2005 van-der-Winden, 2002 J.R. Davis (Ed.), Corrosion of Weldments, Davis & Associates, ASM International, 2006. Bilmes, 2006, Microstructure and pitting corrosion of 13CrNiMo weld metals, Corros. Sci., 48, 3261, 10.1016/j.corsci.2005.10.009 Aquino, 2008, Localized corrosion susceptibility of supermartensitic stainless steel in welded joints, Corrosion, 64, 35, 10.5006/1.3278459 H. Böhni, Localized corrosion of passive metals, in: R. Winston Revie (Ed.), Uhlig’s Corrosion Handbook, second ed., John Wiley & Sons, Zurich, 2000. M. Kimura, Y. Miyata, T. Toyooka, Effect of retained austenite on corrosion performance for modified 13% Cr steel pipe, Corrosion, NACE, Houston, Paper No. 00137, 2000. Hara, 2000, Effect of delta-ferrite on sulphide stress corrosion cracking in a low carbon 13mass% chromium steel, ISIJ Int., 40, 1134, 10.2355/isijinternational.40.1134 B. Baroux, in: P. Marcus (Ed.), Corrosion Mechanisms in Theory and Practice, second ed., Marcel Dekker, Inc., New York, 2002. J.R. Davis, Corrosion of Weldments, ASM International, Materials Park, OH, pp. 117–123. Lippold, 2004, Phase transformations during welding and postweld heat treatment of a 12Cr–6.5Ni–2.5Mo supermartensitic stainless steel, Stainless Steel World, 20, 1 Carrouge, 2004, Effect of delta-ferrite on impact properties of supermartensitic stainless steel heat affected zones, Sci. Technol. Weld. Joining, 9, 377, 10.1179/136217104225021823 Leem, 2001, Amount of retained austenite at room temperature after reverse transformation of martensite to austenite in an Fe–13%Cr–7%Ni–3%Si martensitic stainless steel, Scripta Mater., 45, 767, 10.1016/S1359-6462(01)01093-4 Gervasi, 2011, Analysis of the impact of alloy microstructural properties on passive films formed on low-C 13CrNiMo martensitic stainless steels, Mater. Chem. Phys., 126, 178, 10.1016/j.matchemphys.2010.11.043 ASM Metals Handbook, Corrosion, vol. 13, Corrosion of Weldments, ASM International, 1992, pp. 771–838. ASM Specialty Handbook, Stainless Steels, Corrosion of Weldments, ASM International, 1994, pp. 238–257. Böhni, 2000, Microelectrochemical techniques for studies of localised processes on metal surfaces in the nanometre range, Surf. Coat. Technol., 130, 80, 10.1016/S0257-8972(00)00681-2 Garcia, 2008, Pitting corrosion of welded joints of austenitic stainless steels studied by using an electrochemical minicell, Corros. Sci., 50, 1184, 10.1016/j.corsci.2007.11.028 T. Suter, H. Böhni, in: P. Marcus, F. Mansfeld (Eds.), Analytical Methods in Corrosion Science and Engineering, CRC Press Taylor & Francis Group, Ch. 17, The Microcell Technique, Boca Ratón, 2006, pp. 649–698. T. Suter, R.C. Alkire, Microelectrochemical studies of pit initiation at single inclusions in Al 2024-T3, J. Electrochem. Soc. 148(1) (2001) B36–B42. Krawiec, 2005, Influence of the chemical dissolution of MnS inclusions on the electrochemical behavior of stainless steels, J. Electrochem. Soc., 152, B213, 10.1149/1.1924172 Webb, 2002, Pit Initiation at single sulfide inclusions in stainless steel. I. Electrochemical microcell measurements, J. Electrochem. Soc., 149, B280, 10.1149/1.1474431 S.P. Mattin, G.T. Burstein, in: J.M. Costa, A.D. Mercer (Eds.), Progress in the Understanding and Prevention of Corrosion Proceedings of the 10th European Corrosion Congress, vol. 2, Institute of Materials, London, 1993, p. 1109. Karlsson, 1999, Development of matching composition supermartensitic stainless steel welding consumables, Svetsaren, 3, 3 Müller, 2007, Magnesium and its alloys as degradable biomaterials corrosion studies using potentiodynamic and EIS electrochemical techniques, Mater. Res., 10, 1, 10.1590/S1516-14392007000100003 Birbilis, 2005, Limitations in microelectrochemical capillary cell testing and transformation of electrochemical transients for acquisition of microcell impedance data, Electrochim. Acta, 50, 3536, 10.1016/j.electacta.2005.01.010 Lohrengel, 2004, A new microcell or microreactor for material surface investigations at large current densities, Elecrochim. Acta, 49, 2863, 10.1016/j.electacta.2004.01.068 Leckie, 1966, Environmental factors affecting the critical potential for pitting in 18–8 stainless steel, J. Electrochem. Soc., 113, 1262, 10.1149/1.2423801 Zuo, 2002, The effects of some anions on metastable pitting of 316L stainless steel, Corros. Sci., 44, 13, 10.1016/S0010-938X(01)00031-2 Morris, 1972, Predicting corrosion rates with the potentiostat, Corrosion, 28, 444, 10.5006/0010-9312-28.12.444 Suter, 1997, A new microelectrochemical method to study pit initiation on stainless steels, Electrochim. Acta, 42, 3275, 10.1016/S0013-4686(70)01783-8 Andreatta, 2003, Electrochemical characterisation of aluminium AA7075–T6 and solution heat treated AA7075 using a micro-capillary cell, Electrochim. Acta, 48, 3239, 10.1016/S0013-4686(03)00379-7 Lizlovs, 1975, Evaluation of some electrochemical techniques for the determination of pitting potentials of stainless steel, Corrosion, 31, 219, 10.5006/0010-9312-31.6.219 Man, 1981, The determination of pitting potentials, Corros. Sci., 21, 323, 10.1016/0010-938X(81)90007-X S.N. Rosenbloom, R.A. Corbett, An assessment of ASTM F 2129 electrochemical testing of small medical implants – lessons learned, NACE Corrosion, Paper No. 07674, 2000. Frankel, 1998, Pitting corrosion of metals: a review of the critical factors, J. Electrochem. Soc., 145, 2186, 10.1149/1.1838615 Williams, 1994, Nucleation Growth and stability of micropits in stainless steel, Corros. Sci., 36, 1213, 10.1016/0010-938X(94)90145-7 Pistorius, 1992, Metastable pitting corrosion of stainless steel and the transition to stability, Phil. Trans. Roy. Soc. A, 341, 531, 10.1098/rsta.1992.0114 Frankel, 1987, Metastable pitting of stainless steel, Corrosion (NACE), 43, 429, 10.5006/1.3583880 R.G. Nelly, J.R. Scully, D.W. Shoesmith, R.G. Buchheit, in: P.A Schweitzer (Ed.), Electrochemical Techniques in Corrosion Science and Engineering, Marcel Dekker, Inc., New York, 2003. Thamaraiselvi, 2003, Predicting the susceptibility of HNO3 treated 316 LVM alloy to localized attack – an electrochemical approach, Trends Biomater. Artif. Organs, 17, 19 Standard NACE/ASTM G193 – 09a. Martín, 2008, Application of minielectrochemical cell to corrosion studies of welded joints of austenitic stainless steel, Corros. Eng., Sci. Technol., 43, 343, 10.1179/174327808X286301 Enerhaug, 2001, Factors affecting initiation of pitting corrosion in super martensitic stainless steel weldments, Sci. Technol. Weld. Joining, 6, 330, 10.1179/136217101101538866