Micro-Analysis of the Contact Zone of Tribologically Loaded Second-Phase Reinforced Sol-Gel-Abrasives

Lindsay, P.R., Ault, W.N., 1988, The performance of Seeded Gel Abrasive in Lab and Field Sites, SME Technical Paper MR-880606. Krell, 1996, Advances in the Grinding Efficiency of Sintered Alumina Abrasives, Journal of the American Ceramic Society, 79, 763, 10.1111/j.1151-2916.1996.tb07940.x Klocke, F., Müller, N., Engelhorn, R., 2001, Advanced Grinding with Microcrystalline Aluminum Oxide, SME-Technical Paper MR01-218. Evans, A.G., Heuer, A.H., Porter, D.L., 1977, The fracture toughness of Ceramics, Fracture, Volume I, ICF4, Waterloo, Canada, June 19-24, p. 529-566. Erickson, 1994, In-Situ magnetoplumbite growth in sol-gel derived alumina matrices, Ceramic Transactions, 46, 463 Inasaki, 1987, Grinding of Hard and Brittle Materials, Annals of the CIR, 36, 463, 10.1016/S0007-8506(07)60748-3 Brown, W.R., Eiss, N.S., McAdams, H.T., 1964, Chemical Mechanisms Contributing to Wear of Single Crystal Sapphire on Steel, Journal of the American Ceramic Society, (4), p. 157-162. Komanduri, 1976, The Mechanism of Metal Built-Up on Aluminium Oxide Abrasives, Annals of the CIRP, 25, 191 König, 1979, Phenomenon of wheel loading mechanisms, Annals of the CIRP, 29, 201 Giannuzzi, 1999, A review of focused ion beam milling techniques for TEM specimen preparation, Micron, 30, 197, 10.1016/S0968-4328(99)00005-0 Kumagai, 1985, Controlled Transformation and Sintering of a Boehmite Sol-Gel by α-Alumina Seeding, Journal of the American Ceramic Society, 68, 500, 10.1111/j.1151-2916.1985.tb15818.x Malkin, 1989 Werner, 1971 Buckley, 1972, Friction and Wear of Ceramics, American Ceramic Society Bulletin, 51, 884 Moore, 1980, Abrasive Wear of Brittle Solids, Wear, 60, 123, 10.1016/0043-1648(80)90253-7 König, W., 1965, Der Einfluß nichtmetallischer Einflüsse auf die Zerspanbarkeit von unlegierten Baustählen, Industrieanzeiger Teil 1: 87/26, S. 463-470, Teil 2: 87/43, S. 845-850, Teil 3: 87/51, S. 1033-1038. Kingery, 1976 Brunner, 1997