Methanol as a fuel for internal combustion engines

ICIS, 2017, Chemical profile special, ICIS Chemical Business Landälv, 2017, Methanol as a renewable fuel - a knowledge synthesis Goeppert, 2014, Recycling of carbon dioxide to methanol and derived products - closing the loop, Chemical Society Reviews, 43, 7995, 10.1039/C4CS00122B Martens, 2017, The chemical route to a carbon dioxide neutral world, ChemSusChem, 10, 1039, 10.1002/cssc.201601051 Schweitzer, 2014, Synthesizing strengths of 1st and 3rd generation biorefineries. Biomethanol as a biorefinery product, International Sugar Journal, October 2014, pp.64 Boyd, 1950, Pathfinding in fuels and engines, SAE Q Trans, Vol. 4, pp.182 Dickinson, 1929, The cooperative fuel research and its results, SAE Transactions, Vol. 24, pp.262 Baxter I, Yeo B. An international historic mechanical engineering landmark - the Waukesha CFR fuel research engine. 1928. Url: https://www.asme.org/getmedia/ffedc33f-7e2b-4775-95ec-2f633ddc16f6/50-Cooperative-Fuel-Research-Engine-1928.aspx. Ludvigsen, 2001 Morganti K, Abdullah M, Alzubail A. et al. Improving the efficiency of conventional spark-ignition engines using octane-on-demand combustion. part I: Engine studies. SAE paper nr. 2016-01-0679; 2016a. Morganti K, Alzubail A, Abdullah M. et al. Improving the efficiency of conventional spark-ignition engines using octane-on-demand combustion - part II: Vehicle studies and life cycle assessment. SAE Technical Paper 2016-01-0683; 2016b. Bourhis, 2016, Using ethanol’s double octane boosting effect with low RON naphtha-based fuel for an octane on demand SI engine, SAE Int J Engines, 9, 1460, 10.4271/2016-01-0666 Bourhis G, Solari J, Dauphin R. et al. Fuel properties and engine injection configuration effects on the octane on demand concept for a dual-fuel turbocharged spark ignition engine. SAE Technical Paper 2016-01-2307; 2016b. Jo, 2016, Optimal use of ethanol in dual fuel applications. effects of engine downsizing, spark retard, and compression ratio on fuel economy, SAE Int J Engines, 9, 1087, 10.4271/2016-01-0786 Daniel R, Wang C, Xu H. et al. Dual-injection as a knock mitigation strategy using pure ethanol and methanol. SAE paper no. 2012-01-1152; 2012. Stein R.A, House C.J, Leone T.G. Optimal use of E85 in a turbocharged direct injection engine. SAE paper no. 2009-01-1490; 2009. Porter J. Alcohol as a high octane fuel. SAE paper number 510086; 1951. Bergström, 2007, ABC - alcohol based combustion engines - challenges and opportunities, 1031 Ward, 1996, Fifteen years of fuel methanol distribution, 1 Nichols, 2003, The methanol story: a sustainable fuel for the future, Journal of Scientific & Industrial Research, 62, 97 Wuebben P, Nankee R, Pefley R. Gasoline tolerant methanol fueled ride share van. SAE paper no. 911630; 1991. Black, 1998, Alternative fuel motor vehicle tailpipe and evaporative emissions composition and ozone potential, Journal of the Air & Waste Management Association, 48, 578, 10.1080/10473289.1998.10463715 Pearson R.J, Turner J.W.G. GEM ternary blends: Testing iso-stoichiometric mixtures of gasoline, ethanol and methanol in a production flex-fuel vehicle fitted with a physical alcohol sensor. SAE paper no. 2012-01-1279; 2012. Yang, 2012, China’s growing methanol economy and its implications for energy and the environment, Energy Policy, 41, 878, 10.1016/j.enpol.2011.11.037 Wang X, Ge Y, Liu L. et al. Regulated, carbonyl emissions and particulate matter from a dual-fuel passenger car burning neat methanol and gasoline. SAE paper number 2015-01-1082; 2015a. Dankner G. Methanol as a fuel alternative. 2017 Washington Methanol Policy Forum, available at http://www.methanol.org/wp-content/uploads/2017/06/Dor-Methanol-Economy-June-2017.pdf; 2017. Australian GEM fuel program. available at http://methanolfuels.org/wp-content/uploads/2013/05/Grant-Lukey-Coogee-Energy-Australia.pdf; 2013. Methanol fuels. 2017. Url: http://methanolfuels.org/. The Methanol Institute. 2017. Url: http://www.methanol.org. Olah, 2006 Bozzano, 2016, Efficient methanol synthesis: Perspectives, technologies and optimization strategies, Progress in Energy and Combustion Science, 56, 71, 10.1016/j.pecs.2016.06.001 Sileghem, 2015 Keuken, 2008, Hydrous ethanol for gasoline blending, 1 Johansen, 2009, Low-temperature miscibility of ethanol-gasoline-water blends in flex fuel applications, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 31, 1634, 10.1080/15567030903021897 Hammerschlag, 2006, Ethanol’s energy return on investment:a survey of the literature 1990-present, Environmental Science & Technology, 40, 1744, 10.1021/es052024h International Energy Agency, 2011, IEA biofuel roadmap Energy independence and security act. available at https://www.congress.gov/bill/110th-congress/house-bill/6; 2007. Bergins, 2016, Commercialization of low carbon methanol, ATZextra worldwide, 21(Suppl 11), 22 Pearson, 2012, Energy storage via carbon-neutral fuels made from CO2, water, and renewable energy, Proceedings of the IEEE, 100, 440, 10.1109/JPROC.2011.2168369 Gardiner M. Energy requirements for hydrogen gas compression and liquefaction as related to vehicle storage needs. url: https://www.hydrogen.energy.gov/pdfs/9013_energy_requirements_for_hydrogen_gas_compression.pdf; 2009. Specht, 2009, Storing bioenergy and renewable electricity in the natural gas grid, 69 Amaseder F, Krainz G. Liquid hydrogen storage systems developed and manufactured for the first time for customer cars. SAE paper no. 2006-01-0432; 2006. Bossel, 2003, The future of the hydrogen economy: Bright or bleak?, Cogeneration and Competitive Power Journal, 18 Bossel, 2006, Does a hydrogen economy make sense?, Proceedings of the IEEE, 94, 1826, 10.1109/JPROC.2006.883715 Leonard, 2011 Steinberg, 1978, Synthetic carbonaceous fuels and feedstocks from oxides of carbon and nuclear power, Fuel, 57, 460, 10.1016/0016-2361(78)90154-0 Steinberg, 1997, Methanol as an agent for CO2 mitigation, Energy Convers Mgmt, Vol. 38, pp.S423, 10.1016/S0196-8904(96)00305-6 Weimer, 1996, Methanol from atmospheric carbon dioxide: A liquid zero emission fuel for the future, Energy Conver Manage, 37, 1351, 10.1016/0196-8904(95)00345-2 Turner, 2012, Renewable fuels - an automotive perspective, 1 S, 2018, Electrofuels for the transport sector: A review of production costs, Renew Sust Energy Rev, 81, 1887, 10.1016/j.rser.2017.05.288 France, 2015 Bromberg, 2010, Methanol as an alternative transportation fuel in the US: Options for sustainable and/or energy-secure transportation Machiele P. Flammability and toxicity tradeoffs with methanol fuels. SAE technical paper 872064; 1987. Machiele P. Summary of the fire safety impacts of methanol as a transportation fuel. SAE technical paper 901113; 1990. Gable, 2004, Comparison of acute lethal toxicity of commonly abused psychoactive substances, Addiction, Vol. 99, pp.686, 10.1111/j.1360-0443.2004.00744.x Bitrex.com. About Bitrex. 2017. Url: http://www.bitrex.com/en-us/about-bitrex. Turner, 2018, Alcohol fuels for spark-ignition engines: performance, efficiency and emissions effects at mid to high blend rates for binary mixtures and pure components, IMechE Part D, 232, 36, 10.1177/0954407017752832 The Standards Institution of Israel. Israel M15 press release. url:http://methanolfuels.wpengine.com/wp-content/uploads/2013/05/Israel-M15-Press-Release-8_2016.pdf. Anderson, 2010, Octane numbers of ethanol and methanol gasoline blends estimated from molar concentrations, Energy & Fuels, 24, 6576, 10.1021/ef101125c Kasseris E, Heywood J. Charge cooling effects on knock limits in SI DI engines using gasoline/ethanol blends: Part 1-quantifying charge cooling. SAE paper no. 2012-01-1275; 2012a. Kasseris E, Heywood J. Charge cooling effects on knock limits in SI DI engines using gasoline/ethanol blends: Part 2-effective octane numbers. SAE paper no. 2012-01-1284; 2012b. Turner, 2011, Combustion performance of bio-ethanol at various blend ratios in a gasoline direct injection engine, Fuel, 90, 1999, 10.1016/j.fuel.2010.12.025 Turner J.W.G, Pearson R.J, Bell A. et al. Iso-stoichiometric ternary blends of gasoline, ethanol and methanol: Investigations into exhaust emissions, blend properties and octane numbers. SAE paper no. 2012-01-1586; 2012a. Turner, 2013, Extending the role of alcohols as transport fuels using iso-stoichiometric ternary blends of gasoline, ethanol and methanol, Appl Energy, 102, 72, 10.1016/j.apenergy.2012.07.044 Anderson, 2012, High octane number ethanol-gasoline blends: Quantifying the potential benefits in the United States, Fuel, 97, 585, 10.1016/j.fuel.2012.03.017 Turner J, Pearson R, Purvis R. et al. GEM ternary blends: Removing the biomass limit by using iso-stoichiometric mixtures of gasoline, ethanol and methanol. SAe paper no. 2011-24-0113; 2011b. Furey R, King J. Volatility characteristics of gasoline-alcohol and gasoline-ether fuel blends. SAE Technical Paper 852116; 1985. Yates, 2010, Insights relating to the autoignition characteristics of alcohol fuels, Fuel, 89, 83, 10.1016/j.fuel.2009.06.037 Milpied J, Jeuland N, Plassat G. et al. Impact of fuel properties on the performances and knock behaviour of a downsized turbocharged DI SI engine - focus on octane numbers and latent heat of vaporization. SAE paper no. 2009-01-0324; 2009. Bromberg, 2008, Effective octane and efficiency advantages of direct injection alcohol engines Kalghatgi G. Fuel anti-knock quality - part I. engine studies. SAE technical paper 2001-01-3584; 2001a. Kalghatgi G. Fuel anti-knock quality - part II. vehicle studies - how relevant is motor octane number (MON) in modern engines?SAE paper number 2001-01-3585; 2001b. Yates A.D.B, Swarts A, Viljoen C.L. Correlating auto-ignition delays and knock-limited spark-advance data for different types of fuel. SAE paper no. 2005-01-2083; 2005. Beck C, Stevenson P, Ziman P. The impact of gasoline octane on fuel economy in modern vehicles. SAE paper number 2006-02-3407; 2006. Amer A, Babiker H, Chang J. et al. Fuel effects on knock in a highly boosted direct injection spark ignition engine. SAE paper no. 2012-01-1634; 2012. Luef, 2014, Development of a new test procedure to determine fuel and oil impact on irregular combustion phenomena with focus on highly boosted downsized S.I. engines, 1169 Szybist, 2012, Analysis of the impact of selected fuel thermochemical properties on internal combustion engine efficiency, Energy Fuels, 26, 2798, 10.1021/ef2019879 Sarathy, 2014, Alcohol combustion chemistry, Prog Energy Combust Sci, 44, 40, 10.1016/j.pecs.2014.04.003 Fernández-Tarrazo, 2016, Minimum ignition energy of methanol-air mixtures, Combustion and Flame, 171, 234, 10.1016/j.combustflame.2016.06.006 Pearson R, Turner J, Holland B. et al. Alcohol-based fuels in high performance engines. SAE paper no. 2007-01-0056; 2007. Burke, 2016, A detailed chemical kinetic modeling, ignition delay time and jet-stirred reactor study of methanol oxidation, Combust Flame, 165, 125, 10.1016/j.combustflame.2015.11.004 Svensson E, Li C, Shamun S. et al. Potential levels of soot, NOx, HC and CO for methanol combustion. SAE Technical Paper 2016-01-0887; 2016. Heywood, 1988 Kumar A, Khatri D.S, Babu M.K.G. An investigation of potential and challenges with higher ethanol-gasoline blend on a single cylinder spark ignition research engine. SAE paper no. 2009-01-0137; 2009. Liu, 2007, Study of spark ignition engine fueled with methanol/gasoline fuel blends, Appl Thermal Eng, 27, 1904, 10.1016/j.applthermaleng.2006.12.024 Nakata K, Utsumi S, Ota A. et al. The effect of ethanol fuel on a spark ignition engine. SAE paper no. 2006-01-3380; 2006. Wei, 2009, Formaldehyde and methanol emissions from a methanol/gasoline-fueled spark-ignition (SI) engine, Energy & Fuels, 23, 3313, 10.1021/ef900175h Sandstroem-Dahl C, Erlandsson L, Gasste J. et al. Measurement methodologies for hydrocarbons, ethanol and aldehyde emissions from ethanol fuelled vehicles. SAE paper no. 2010-01-1557; 2010. Wallner, 2011, Correlation between speciated hydrocarbon emissions and flame ionization detector response for gasoline/alcohol blends, J Eng Gas Turbines Power, 133, 1, 10.1115/1.4002893 Aleiferis, 2013, Characterisation of flame development with ethanol, butanol, iso-octane, gasoline and methane fuels in a direct-injection spark-ignition engine, Fuel, 109, 256, 10.1016/j.fuel.2012.12.088 Geng, 2015, Comparative study on measurements of formaldehyde emission of methanol/gasoline fueled SI engine, Fuel, 148, 9, 10.1016/j.fuel.2015.01.075 Verhelst, 2009, Multi-zone thermodynamic modelling of spark-ignition engine combustion - an overview, Energy Conversion Manage, 50, 1326, 10.1016/j.enconman.2009.01.002 Szybist, 2016, Effects of fuel composition on EGR dilution tolerance in spark ignited engines, SAE Int J Engines, 9, 819, 10.4271/2016-01-0715 Lipatnikov, 2002, Turbulent flame speed and thickness: phenomenology, evaluation, and application in multi-dimensional simulations, Prog Energy Combust Sci, 28, 1, 10.1016/S0360-1285(01)00007-7 Vancoillie J, Verhelst S, Demuynck J. Laminar burning velocity correlations for methanol-air and ethanol-air mixtures valid at SI engine conditions. SAE paper no. 2011-01-0846; 2011a. Li, 2007, A comprehensive kinetic mechanism for CO, CH2O, and CH3OH combustion, International Journal of Chemical Kinetics, 39, 109, 10.1002/kin.20218 Sileghem, 2014, Performance and emissions of iso-stoichiometric ternary GEM blends on a production SI engine, Fuel, 117, 286, 10.1016/j.fuel.2013.09.043 Verhelst, 2010, A correlation for the laminar burning velocity for use in hydrogen spark ignition engine simulation, Int J Hydrogen Energy, 36, 957, 10.1016/j.ijhydene.2010.10.020 Gu, 2000, Laminar burning velocity and Markstein lengths of methane-air mixtures, Combust Flame, 121, 41, 10.1016/S0010-2180(99)00142-X Sileghem, 2013, Laminar burning velocity of gasoline and the gasoline surrogate components iso-octane, n-heptane and toluene, Fuel, 112, 355, 10.1016/j.fuel.2013.05.049 Katoch, 2016, Measurement of laminar burning velocities of methanol-air mixtures at elevated temperatures, Fuel, 182, 57, 10.1016/j.fuel.2016.05.076 Beeckmann, 2014, Experimental investigation of the laminar burning velocities of methanol, ethanol, n-propanol, and n-butanol at high pressure, Fuel, 117, 340, 10.1016/j.fuel.2013.09.025 Zhang, 2008, Measurements of laminar burning velocity and markstein lengths for methanol-air-nitrogen mixtures at elevated pressures and temperatures, Combust Flame, 155, 358, 10.1016/j.combustflame.2008.07.005 Vancoillie, 2014, The turbulent burning velocity of methanol-air mixtures, Fuel, 130, 76, 10.1016/j.fuel.2014.04.003 Verhelst, 2005 Ohara, 2009 Lawes, 2005, Variation of turbulent burning rate of methane, methanol, and iso-octane air mixtures with equivalence ratio at elevated pressure, Combust Sci Technol, 177, 1273, 10.1080/00102200590950467 Lipatnikov, 2010, Effects of premixed flames on turbulence and turbulent scalar transport, Progress Energy Combust Sci, 36, 1, 10.1016/j.pecs.2009.07.001 Haas, 2009, Low and intermediate temperature oxidation of ethanol and ethanol-PRF blends: An experimental and modeling study, Combustion and Flame, 156, 2346, 10.1016/j.combustflame.2009.08.012 Burluka A.A, Liu K, Sheppard C.G.W. et al. The influence of simulated residual and NO concentrations on knock onset for PRFs and gasolines. SAE paper no. 2004-01-2998; 2004. Livengood, 1955, Correlation of autoignition phenomena in internal combustion engines and rapid compression machines, Symposium (International) on Combustion, 5, 347, 10.1016/S0082-0784(55)80047-1 Douaud A.M, Eyzat P. Four-octane-number method for predicting the anti-knock behavior of fuels and engines. SAE paper no. 780080; 1978. Bougrine S, Richard S. Modelling and simulation of the combustion of ethanol blended fuels in a SI engine using a 0D coherent flame model. SAE paper no. 2009-24-0016; 2009. Boretti, 2012, Towards 40% efficiency with BMEP exceeding 30 bar in directly injected, turbocharged, spark ignition ethanol engines, Energy Conver Manage, 57, 154, 10.1016/j.enconman.2011.12.011 Frankzke, 1981 Bowman, 1975, Shock-tube investigation of high-temperature oxidation of methanol, Combust Flame, 25, 343, 10.1016/0010-2180(75)90106-6 Natarajan, 1981, An experimental and analytical study of methanol ignition behind shock waves, Combust Flame, 43, 35, 10.1016/0010-2180(81)90005-5 Kumar, 2011, Autoignition of methanol: Experiments and computations, Int J Chem Kinetics, 43, 175, 10.1002/kin.20546 Zeng, 2012, Macroscopic characteristics for direct-injection multi-hole sprays using dimensionless analysis, Exp Thermal Fluid Sci, 40, 81, 10.1016/j.expthermflusci.2012.02.003 Aleiferis, 2013, An analysis of spray development with iso-octane, n-pentane, gasoline, ethanol and n-butanol from a multi-hole injector under hot fuel conditions, Fuel, 105, 143, 10.1016/j.fuel.2012.07.044 Gao, 2007, Spray properties of alternative fuels: A comparative analysis of ethanol-gasoline blends and gasoline, Fuel, 86, 1645, 10.1016/j.fuel.2006.11.013 Zeng, 2012, Atomization and vaporization for flash-boiling multi-hole sprays with alcohol fuels, Fuel, 95, 287, 10.1016/j.fuel.2011.08.048 Aleiferis, 2010, Effect of fuel temperature on in-nozzle cavitation and spray formation of liquid hydrocarbons and alcohols from a real-size optical injector for direct-injection spark-ignition engines, Int J Heat Mass Transfer, 53, 4588, 10.1016/j.ijheatmasstransfer.2010.06.033 Most W.J, Longwell J.P. Single-cylinder engine evaluation of methanol - improved energy economy and reduced NOx. SAE Paper no. 750119; 1975. Hunwartzen I. Modification of CFR test engine unit to determine octane numbers of pure alcohols and gasoline-alcohol blends. SAE paper no. 820002; 1982. Liang, 2017, Laminar burning velocity measurement of hydrous methanol at elevated temperatures and pressures, Fuel, 204, 206, 10.1016/j.fuel.2017.05.060 Andersen, 2010, Vapor pressures of alcohol-gasoline blends, Energy Fuels, 24, 3647, 10.1021/ef100254w Furey R, Perry K. Vapor pressures of mixtures of gasolines and gasoline-alcohol blends. SAE Technical Paper 861557; 1986. Jiao Q, Y.R, Reitz R. Modeling the influence of molecular interactions on the vaporization of multi-component fuel sprays. SAE paper no. 2011-01-0387; 2011. Andersen, 2010, Distillation curves for alcohol-gasoline blends, Energy Fuels, 24, 2683, 10.1021/ef9014795 Anderson J.E, Leone T.G, Shelby M.H. et al. Octane numbers of ethanol-gasoline blends: Measurements and novel estimation method from molar composition. SAE paper no. 2012-01-1274; 2012b. Atkins, 1994 W. Skinner, 1981, Corrosion of carburettor materials, Corrosion Coatings, South Africa, 34, 5 Qi, 2005, Properties, performance, and emissions of methanol-gasoline blends in a spark ignition engine, Proc Instit Mech Eng, Part D, 219, 405, 10.1243/095440705X6659 Donnelly, 1976, Methanol as an automotive fuel: a summary of research in the M.I.T. energy laboratory Gramajo de Doz, 2005, Liquid-liquid equilibria of water + ethanol + reformate, Fluid Phase Equilibria, 230, 45, 10.1016/j.fluid.2004.11.013 Sileghem, 2012, Alternative fuels for spark-ignition engines: Mixing rules for the laminar burning velocity of gasoline-alcohol blends, Energy & Fuels, 26, 4721, 10.1021/ef300393h Hirasawa, 2002, Determination of laminar flame speeds using digital particle image velocimetry: Binary fuel blends of ethylene, n-butane, and toluene, Proc Combust Institute, 29, 1427, 10.1016/S1540-7489(02)80175-4 Warnatz, 1996 Sileghem, 2015, A quasi-dimensional model for si engines fueled with gasoline-alcohol blends: Knock modeling, Fuel, 140, 217, 10.1016/j.fuel.2014.09.091 Pearson, 2015, Iso-stoichiometric fuel blends: characterisation of physicochemical properties for mixtures of gasoline, ethanol, methanol and water, IMechE Part D, 229, 111, 10.1177/0954407014529424 Waqas M, Naser N, Sarathy M. et al. Auto-ignition of iso-stoichiometric blends of gasoline-ethanol-methanol (GEM) in SI, HCCI and CI combustion modes. SAE technical paper 2017-01-0726; 2017. Dai, 2013, Investigation on characteristics of exhaust and evaporative emissions from passenger cars fueled with gasoline/methanol blends, Fuel, 113, 10, 10.1016/j.fuel.2013.05.038 Xiang, 2015, Introduction of Jetsun methanol fuel additives and engine oils McCoy, 1993, Alcohol-fueled vehicles Yuen P.K.P, Villaire W, Beckett J. Automotive materials engineering challenges and solutions for the use of ethanol and methanol blended fuels. SAE paper no. 2010-01-0729; 2010. Turner, 2012, Evolutionary decarbonization of transport: a contiguous roadmap to affordable mobility for everyone using sustainable organic fuels for transport, 71 Hagen D.L. Methanol as a fuel: a review with bibliography. SAE paper no. 770792; 1977. Walker M, Chance R. Corrosion of metals and the effectiveness of inhibitors in ethanol fuels. SAE paper no. 831828; 1983. Hansen, 2007 Ingamells J.C, Lindquist R.H. Methanol as a motor fuel or a gasoline blending component. SAE Technical Paper 750123; 1975. Cowart J.S, Boruta W.E, Dalton J.D. et al. Powertrain development of the 1996 Ford Flexible Fuel Taurus. SAE paper no. 952751; 1995. Kabasin D, Hoyer K, Kazour J. et al. Heated injectors for ethanol cold starts. SAE paper no. 2009-01-0615; 2009. Gong, 2011, Effects of ambient temperature on firing behavior and unregulated emissions of spark-ignition methanol and liquefied petroleum gas/methanol engines during cold start, Fuel, 90, 19, 10.1016/j.fuel.2010.08.012 Colpin C, Leone T, Lhuillery M. et al. Key parameters for startability improvement applied to ethanol engines. SAE paper no. 2009-01-0616; 2009. Brusstar M.J, Stuhldreher M, Swain D. et al. High efficiency and low emissions from a port-injected engine with neat alcohol fuels. SAE paper no. 2002-01-2743; 2002. Aikawa K, Sakurai T, Hayashi A. Study of ethanol-blended fuel (E85) effects under cold-start conditions. SAE paper no. 2009-01-0620; 2009. Markel, 1998, Modeling and cold start in alcohol-fueled engines Siewert R.M, Groff E.G. Unassisted cold starts to -29 deg c and steady-state tests of a direct-injection stratified-charge (disc) engine operated on neat alcohols. SAE paper no. 872066; 1987. Marriott C.D, Wiles M, Gwidt J.M. et al. Development of a naturally aspirated spark ignition direct injected flex-fuel engine. SAE paper no. 2008-01-0319; 2008. Kalghatgi, 2012, Pre-ignition and ‘super-knock’ in turbo-charged spark-ignition engines, International Journal of Engine Research, 13, 399, 10.1177/1468087411431890 Suga T, Kitajima S, Fujii I. Pre-ignition phenomena of methanol fuel (M85) by the post-ignition technique. SAE paper no. 892061; 1989. Giroldo M.B, Werninghaus E, Coelho E. et al. Development of 1.6L flex fuel engine for Brazilian market. SAE paper no. 2005-01-4130; 2005. Bergström, 2007, The new ECOTEC turbo Biopower engine from GM powertrain, 1 Bruetsch, 1993, Evaluation of specialized catalysts for methanol (M100) vehicles Clemente R.C, Werninghaus E, Coelho E.P.D. et al. Development of an internal combustion alcohol-fueled engine. SAE paper no. 2001-01-3917; 2001. Neame G.R, Gardiner D.P, Mallory R.W. et al. Improving the fuel economy of stoichiometrically fuelled S.I. engines by means of EGR and enhanced ignition - a comparison of gasoline, methanol and natural gas. SAE paper no. 952376; 1995. Pannone G.M, Johnson R.T. Methanol as a fuel for a lean turbocharged spark-ignition engine. SAE paper no. 890435; 1989. Li, 2010, Effect of injection and ignition timings on performance and emissions from a spark-ignition engine fueled with methanol, Fuel, 89, 3919, 10.1016/j.fuel.2010.06.038 Koenig A, Lee W, Bernhardt W. Technical and economical aspects of methanol as an automotive fuel. SAE paper no. 760545; 1975. Brusstar M.J. High efficiency with future alcohol fuels in a stoichiometric medium duty spark ignition engine. SAE paper no. 2007-01-3993; 2007. Vancoillie, 2013, The potential of methanol as a fuel for flex-fuel and dedicated spark-ignition engines, Appl Energy, 102, 140, 10.1016/j.apenergy.2012.05.065 Naganuma K, Vancoillie J, Sileghem L, Verhelst S. et al. Drive cycle analysis of load control strategies for methanol fuelled ICE vehicle. SAE Technical paper no. 2012-01-1606; 2012. Lotus engineering software, 2018. Url: http://www.lotuscars.com/engineering/engineering-software. Vancoillie, 2011, Comparison of the renewable transportation fuels, hydrogen and methanol formed from hydrogen, with gasoline - engine efficiency study, Int J Hydrogen Energy, 37, 9914, 10.1016/j.ijhydene.2012.03.145 Sileghem L, Ickes A, Wallner T. et al. Experimental investigation of a DISI production engine fuelled with methanol, ethanol, butanol and iso-stoichiometric alcohol blends. SAE technical paper 2015-01-0768; 2015b. Nguyen D.-K, Craeynest T.V, Pillu T. et al. Downsizing potential of methanol fueled DISI engine with variable valve timing and boost control. SAE Technical Paper 2018-01-0918; 2018a. Windawi, 1992, Controlling the exhaust emissions from alternative fuel vehicles. new opportunity for platinum metals catalysts, Platinum Metals Rev, 36, 185 Geng, 2015, Experimental investigation on the combustion and particulate matter (PM) emissions from a port-fuel injection (PFI) gasoline engine fueled with methanol-ultralow sulfur gasoline blends, Fuel, 145, 221, 10.1016/j.fuel.2014.12.067 Ketterer, 2014, On the nature of particulate emissions from DISI engines at cold-fast-idle, SAE Int J Engines, 7, 986, 10.4271/2014-01-1368 Wang, 2015, Evaluation on toxic reduction and fuel economy of a gasoline direct injection- (GDI-) powered passenger car fueled with methanol-gasoline blends with various substitution ratios, Appl Energy, 157, 134, 10.1016/j.apenergy.2015.08.023 Sileghem L, Huylebroeck T, Van den Bulcke A. et al. Performance and emissions of a SI engine using methanol-water blends. SAE technical paper 2013-01-1319; 2013b. Cohn, 2005, Direct injection ethanol boosted gasoline engines: Biofuel leveraging for cost effective reduction of oil dependence and CO2 emissions Bromberg, 2006, Calculations of knock suppression in highly turbocharged gasoline/ethanol engines using direct ethanol injection Gunston, 1995 Berni F, Breda S, D’Adamo A. et al. Numerical investigation on the effects of water/methanol injection as knock suppressor to increase the fuel efficiency of a highly downsized GDI engine. SAE technical paper 2015-24-2499; 2015. Böhm, 2016, Functional integration of water injection into the gasoline engine, MTZ, Vol. 77, pp.36 Böhm, 2016, Approaches for on-board water provision for water injection, ATZ, Vol. 118, pp.54 Bromberg, 2008, Benchmarking of alcohol chemical kinetic mechanism for laminar flame speed calculations Cohn D, Bromberg L. Dual-fuel gasoline-alcohol engines for heavy duty trucks: Lower emissions, flexible -fuel alternative to diesel engines. SAE paper no. 2018-01-0888; 2018. Whitaker P, Shen Y, Spanner C. et al. Development of the combustion system for a V8 flexible fuel turbocharged direct injection engine. SAE technical paper 2010-01-0585; 2010. Chang J, Viollet Y, Alzubail A, Abdul-Manan A. et al. Octane-on-demand as an enabler for highly efficient spark ignition engines and greenhouse gas emissions improvement. SAE paper no. 2015-01-1264; 2015. doi:10.4271/2015-01-1264. Viollet Y, Abdullah M, Alhajhouje A, J C. Characterization of high efficiency octane-on-demand fuels requirement in a modern spark ignition engine with dual injection system. SAE paper no. 2015-01-1265; 2015. doi:10.4271/2015-01-1265. Liu, 2015, Dual-fuel spark ignition (DFSI) combustion fuelled with different alcohols and gasoline for fuel efficiency, Fuel, 157, 255, 10.1016/j.fuel.2015.04.042 Liu, 2015, Comparative study on alcohol-gasoline and gasoline-alcohol dual-fuel spark ignition (DFSI) combustion for engine particle number (PN) reduction, Fuel, 159, 250, 10.1016/j.fuel.2015.06.059 Kozuoka K, Kurotani T, Chishima H, Kudo H. Study of high-compression-ratio engine combined with an ethanol-gasoline fuel separation system. SAE paper no. 2014-01-2614; 2014. Jackson M, Unnasch S, Sullivan C, Renner R. Transit bus operation with methanol fuel. SAE paper no. 850216; 1985. Toepel R, Bennethum J, Heruth R. Development of Detroit Diesel Allison 6V-92TA methanol fueled coach engine. SAE paper no. 831744; 1983. Urban C, Timbario T, Bechtold R. Performance and emissions of a DDC 8V-71 engine fueled with cetane improved methanol. SAE paper no. 892064; 1989. Wuebben P, Unnasch S, Pellegrin V, Quigg D, Urban B. Transit bus operation with a DDC 6V-92TAC engine operating on ignition-improved methanol. SAE paper no. 902161; 1990. Portin K. Wärtsilä gas engine development & methanol adaptation. http://classnk-rd.com/assets/pdf/V_Wartsila_Gas_Engine_Development_Methanol_Adaptation.pdf. MAN Diesel & Turbo. Using Methanol Fuel in the MAN B&W ME-LGI Series. https://www.mandieselturbo.com/docs/default-source/shopwaredocuments/using-methanol-fuel-in-the-man-b-w-me-lgi-series.pdf. Verhelst, 2009, Hydrogen-fueled internal combustion engines, Prog Energy Combust Sci, 35, 490, 10.1016/j.pecs.2009.08.001 Shamun, 2016, Exhaust PM emissions analysis of alcohol fueled heavy-duty engine utilizing PPC, SAE International Journal of Engines, 9, 2142, 10.4271/2016-01-2288 Shamun, 2017, Experimental investigation of methanol compression ignition in a high compression ratio HD engine using a box-behnken design, Fuel, 209, 624, 10.1016/j.fuel.2017.08.039 Coulier, 2016, Using alcohol fuels in dual fuel operation of compression ignition engines: A review, 224 Song, 2008, Performance and emissions of a diesel engine fuelled with methanol, Energy Fuels, 22, 3883, 10.1021/ef800492r Liu, 2010, Effect of pilot diesel quantity and fuel delivery advance angle on the performance and emission characteristics of a methanol-fueled diesel engine, Energy Fuels, 24, 1611, 10.1021/ef901281m Cheung, 2009, Investigation on the effect of port-injected methanol on the performance and emissions of a diesel engine at different engine speeds, Energy Fuels, 23, 5684, 10.1021/ef9005516 Yao, 2008, Effect of diesel/methanol compound combustion on diesel engine combustion and emissions, Energy Conver Manage, 49, 1696, 10.1016/j.enconman.2007.11.007 Wei, 2015, Combustion and emission characteristics of a turbocharged diesel engine using high premixed ratio of methanol and diesel fuel, Fuel, 140, 156, 10.1016/j.fuel.2014.09.070 Yin, 2016, Visualization of combustion characteristic of diesel in premixed methanol-air mixture atmosphere of different ambient temperature in a constant volume chamber, Fuel, 174, 242, 10.1016/j.fuel.2016.02.030 Hikino K, Suzuki T. Development of methanol engine with autoignition for low NOx emission and better fuel economy. SAE paper no. 891842; 1989. Pucilowski M, Jangi M, Shamun S. et al. Effect of start of injection on the combustion characteristics in a heavy-duty DICI engine running on methanol. SAE Technical Paper 2017-01-0560; 2017. Richards B. Methanol-fueled Caterpillar 3406 engine experience in on-highway trucks. SAE Technical Paper 902160; 1990. Roberts, 2014, Prospects for high-temperature combustion, neat alcohol-fueled diesel engines, SAE International Journal of Engines, 7, 448, 10.4271/2014-01-1194 Tree, 2007, Soot processes in compression ignition engines, Prog Energy Combust Sci, 33, 272, 10.1016/j.pecs.2006.03.002 Shamun, 2017, Detailed characterization of particulate matter in alcohol exhaust emissions Aakko-Saksa, 2017, Methanol with additives for diesel engine - MD95 concept, SUMMETH final seminar Moirangthem, 2016, Alternative fuels for marine and inland waterways: An exploratory study Malcolm PirnieInc., 1999, Evaluation of the fate and transport of methanol in the environment Stena Line Scandinavia AB. Stena Germanica’s methanol conversion. 2018. Url: https://www.stenalinefreight.com/news/Methanol-project. Waterfront Shipping Company Limited. Methanol-fueled vessels mark one year of safe, reliable, and efficient operations. 2018. Url: https://www.wfs-cl.com/news/2017/04/methanol-fueled-vessels-mark-one-year-safe-reliable-and-efficient-operations. LeanShips. Low Energy and Near to zero emissions Ships. 2018. Url: http://www.leanships-project.eu. Summeth. Sustainable Marine Methanol. 2018. Url: http://summeth.marinemethanol.com/. GreenPilot. Greenpilot project. 2018. Url: https://www.greenpilot.se. Ellis, 2017, Study on the use of ethyl and methyl alcohol as alternative fuels in shipping Andersson, 2015, Methanol as a marine fuel report Dierickx, 2018, Strategies for introducing methanol as an alternative fuel for shipping Kumar, 2014, An overview of unsolved deficiencies of direct methanol fuel cell technology: factors and parameters affecting its widespread use, Int J Energy Res, 38, 1367, 10.1002/er.3163 Tartakovsky, 2018, Fuel reforming in internal combustion engines, Prog Energy Combust Sci, 67, 88, 10.1016/j.pecs.2018.02.003 Poran, 2017, Influence of methanol reformate injection strategy on performance, available exhaust gas enthalpy and emissions of a direct-injection spark ignition engine, Int J Hydrogen Energy, 42, 15652, 10.1016/j.ijhydene.2017.05.056 Nguyen, 2017, Computational study of the laminar reaction front properties of diluted methanol-air flames enriched by the fuel reforming product, Energy Fuels, 31, 9991, 10.1021/acs.energyfuels.7b00691 Hoffman W, Wong V, Cheng W. et al. A new approach to ethanol utilization: High efficiency and low NOx in an engine operating on simulated reformed ethanol. SAE technical paper 2008-01-2415; 2008. Carapellucci, 2003, Membrane systems for CO2 capture and their integration with gas turbine plants, Proc Instit Mech Eng, Part A, 217, 505, 10.1243/095765003322407557 Cocco, 2009, Use of alternative hydrogen energy carriers in SOFC-MGT hybrid power plants, Energy Convers Manage, 50, 1040, 10.1016/j.enconman.2008.12.019 Kowalewicz, 1993, Methanol as a fuel for spark ignition engines: a review and analysis, Proc Instit Mech Eng, Part D, 207, 43, 10.1243/PIME_PROC_1993_207_158_02 McCall D, Lalk T, Davison R. et al. Performance and emissions characteristics of a spark ignition engine fueled with dissociated and steam-reformed methanol. SAE technical paper 852106; 1985. Menrad H, Bernhardt W, Decker G. Methanol vehicles of Volkswagen - a contribution to better air quality. SAE paper no. 881196; 1988. König A, Ellinger K.-W, Korbel K. Engine operation on partially dissociated methanol. SAE technical paper 850573; 1985. Turner J. Processing of fuel and recirculated exhaust gas. patent number WO2012049458 A1; 2012. Poran, 2017, Performance and emissions of a direct injection internal combustion engine devised for joint operation with a high-pressure thermochemical recuperation system, Energy, 124, 214, 10.1016/j.energy.2017.02.074 Bromberg L, Cohn D. Ultrahigh efficiency alcohol engines using optimized exhaust heat recovery. US patent number 9234482 (filed July 2013); 2013. Fowler J, Morgenstern D, Sall E. et al. Integration of an E85 reforming system into a vehicle-ready package and project results. SAE technical paper 2014-01-1191; 2014. Wheeler J, Stein R, Morgenstern D. et al. Low-temperature ethanol reforming: A multi-cylinder engine demonstration. SAE technical paper 2011-01-0142; 2011. Lu, 2011, Fuel design and management for the control of advanced compression-ignition combustion modes, Prog Energy Combust Sci, 37, 741, 10.1016/j.pecs.2011.03.003 Brown A.G, Stone C.R, Beckwith P. Cycle-by-cycle variations in spark ignition engine combustion - part i: flame speed and combustion measurements and a simplified turbulent combustion model. SAE paper no. 960612; 1996. Mohanan P, Babu M.K.G. A simulation model for a methanol fueled turbocharged multi-cylinder automotive spark ignition engine. SAE paper no. 912417; 1991. Gibbs, 1959, Effect of molecular structure on burning velocity, J Chem Eng Data, 4, 226, 10.1021/je60003a011 Metghalchi, 1982, Burning velocities of mixtures of air with methanol, isooctane, and indolene at high pressure and temperature, Combust Flame, 48, 191, 10.1016/0010-2180(82)90127-4 Pourkhesalian, 2010, Alternative fuel and gasoline in an SI engine: A comparative study of performance and emissions characteristics, Fuel, 89, 1056, 10.1016/j.fuel.2009.11.025 Liao, 2007, Laminar burning velocities for mixtures of methanol and air at elevated temperatures, Energy Conver Manage, 48, 857, 10.1016/j.enconman.2006.08.017 Zimont, 2000, Gas premixed combustion at high turbulence. turbulent flame closure combustion model, Exp Thermal Fluid Sci, 21, 179, 10.1016/S0894-1777(99)00069-2 Abdel-Gayed, 1987, Turbulent burning velocities: A general correlation in terms of straining rates, Proc R Soc London A Math Phys Sci, 414, 389 Blizard N.C, Keck J.C. Experimental and theoretical investigation of turbulent burning model for internal combustion engines. SAE paper no. 740191; 1974. Westbrook, 1980, Prediction of laminar flame properties of methanol-air mixtures, Combust Flame, 37, 171, 10.1016/0010-2180(80)90084-X Gülder, 1984, Burning velocities of ethanol isooctane blends, Combust Flame, 56, 261, 10.1016/0010-2180(84)90060-9 Nguyen, 2018, A quasi-dimensional combustion model for spark ignition engines fueled with gasoline-methanol blends, IMechE Part D: Journal of Automobile Engineering, 232, 57, 10.1177/0954407017728161 Vancoillie, 2014, Development and validation of a quasi-dimensional model for methanol and ethanol fueled SI engines, Appl Energy, 132, 412, 10.1016/j.apenergy.2014.07.046 Vancoillie, 2013 Demuynck, 2012 Broekaert, 2016, Heat transfer in premixed spark ignition engines part I: Identification of the factors influencing heat transfer, Energy, 116, 380, 10.1016/j.energy.2016.08.065 De Cuyper, 2016, Heat transfer in premixed spark ignition engines part II: Systematic analysis of the heat transfer phenomena, Energy, 116, 851, 10.1016/j.energy.2016.10.032 Gamma Technologies. GT-SUITE overview. 2018. Url: https://www.gtisoft.com/gt-suite/gt-suite-overview/. Nguyen D.-K, Verhelst S. Development of laminar burning velocity correlation for the simulation of methanol fueled SI engines operated with onboard fuel reformer. SAE Technical Paper 2017-01-0539; 2017b. Omari A, Shapiro M, Tartakovsky L. Laminar burning velocity of alcohol reforming products and effects of cellularity on flame propagation. SAE paper no. 2015-01-0775; 2015. Poran, 2015, Energy efficiency of a direct-injection internal combustion engine with high-pressure methanol steam reforming, Energy, 88, 506, 10.1016/j.energy.2015.05.073 Ramadan B.H, Charles L, Gray J, Hamady F. et al. Multidimensional predictions of methanol combustion in a high-compression DI engine. SAE paper no. 2003-01-3133; 2003. Pontoppidan M, Bonfiglioli S, Damasceno F. et al. Detailed study of ethanol in-cylinder combustion behavior by means of a numerical virtual engine model approach. SAE paper no. 2005-01-3989; 2005. Zhen, 2013, Numerical analysis on knock for a high compression ratio spark-ignition methanol engine, Fuel, 103, 892, 10.1016/j.fuel.2012.10.023 Lauer, 2011, Prediction of the wall film formation and performance of an engine operated with the ethanol blend E85 Yao, 2012, Evaporate prediction and compensation of intake port wall-wetting fuel film for spark ignition engines fueled with ethanol-gasoline blends, J Zhejang University - Sci, 10.1631/jzus.A1200068 Liebsch S, Zboralski A, Maass J. et al. Cold start simulation and test on DISI engines utilizing a multi-zone vaporization approach. SAE paper no. 2012-01-0402; 2012. Jangi, 2017, Modelling of methanol combustion in a direct injection compression ignition engine using an accelerated stochastic fields method, Energy Procedia, 105, 1326, 10.1016/j.egypro.2017.03.482 Vancoillie, 2010, Modeling the combustion of light alcohols in SI engines: a preliminary study, 1 Pearson, 2009, Gasoline-ethanol-methanol tri-fuel vehicle development and its role in expediting sustainable organic fuels for transport, 1 Ormsby, 2005 Lange, 1967 Tsuboi, 1981, Shock tube study on homogeneous thermal oxidation of methanol, Combust Flame, 42, 61, 10.1016/0010-2180(81)90142-5