Metallographic and Microstructure Analysis of Gas Tungsten Arc-Welded Bimetallic Copper-to-Stainless Steel Joints

K. Suzuki, Importance of precision analysis in steel production. Met. Mater. Int. 9, 583 (2003)

C.-C. Hsieh, W. Wu, Phase transformation of δ → σ in multipass heat-affected and fusion zones of dissimilar stainless steels. Met. Mater. Int. 17, 375 (2011)

C.C. Hsieh, T.C. Chang, D.Y. Lin, M.C. Chen, W. Wu, Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process. Met. Mater. Int. 13, 411 (2007)

D.Y. Lin, C.C. Hsieh, Precipitation examination of δ, σ, and γ phases using modified Cr/Ni equivalent ratios during the multipass welding of stainless steels. Met. Mater. Int. 15, 507 (2009)

M. Sabzi, S.M. Dezfuli, Drastic improvement in mechanical properties and weldability of 316L stainless steel weld joints by using electromagnetic vibration during GTAW process. J. Manuf. Process. 33, 74 (2018)

L. Dong, Q. Peng, H. Xue, E.H. Han, W. Ke, L. Wang, Correlation of microstructure and stress corrosion cracking initiation behaviour of the fusion boundary region in a SA508 Cl. 3-Alloy 52 M dissimilar weld joint in primary pressurized water reactor environment. Corros. Sci. 132, 9 (2018)

M. Divya, S.K. Albert, Dilution effects on weld metal microstructure and liquation cracking susceptibility of 304B4 SS joined using E309 electrode. J. Manuf. Process. 34, 540 (2018)

S. Banetta, B. Bellin, P. Lorenzetto, F. Zacchia, B. Boireau, I. Bobin, P. Boiffard, A. Cottin, P. Nogue, R. Mitteau, R. Eaton, R. Raffray, A. Bürger, J. Du, J. Linke, G. Pintsuk, T. Weber, Manufacturing and testing of a ITER First Wall Semi-Prototype for EUDA pre-qualification. Fusion Eng. Des. 98–99, 1211 (2015)

V. Dimatteo, A. Ascari, A. Fortunato, Continuous laser welding with spatial beam oscillation of dissimilar thin sheet materials (Al-Cu and Cu-Al): process optimization and characterization. J. Manuf. Process. 44, 158 (2019)

S. Li, Y. Chen, J. Kang, Y. Huang, J.A. Gianetto, L. Yin, Interfacial microstructures and mechanical properties of dissimilar titanium alloy and steel friction stir butt-welds. J. Manuf. Process. 40, 160 (2019)

G.R. Joshi, V.J. Badheka, Microstructures and properties of copper to stainless steel joints by hybrid FSW. Metallogr. Microstruct. Anal. 6, 470 (2017)

M. Sarvari, A. Abdollah-zadeh, H. Naffakh-Moosavy, A. Rahimi, H. Parsaeyan, Investigation of collision surfaces and weld interface in magnetic pulse welding of dissimilar Al/Cu sheets. J. Manuf. Process. 45, 356 (2019)

A.K. Kadian, P. Biswas, The study of material flow behaviour in dissimilar material FSW of AA6061 and Cu-B370 alloys plates. J. Manuf. Process. 34, 96 (2018)

G.R. Joshi, V.J. Badheka, Processing of bimetallic steel-copper joint by laser beam welding. Mater. Manuf. Process. 34, 1232 (2019)

G.R. Joshi, V.J. Badheka, Studies on tool shoulder diameter of dissimilar friction stir welding copper to stainless steel. Metallogr. Microstruct. Anal. 8, 263 (2019)

S. Ao, C. Li, W. Zhang, M. Wu, Y. Dai, Y. Chen, Z. Luo, Microstructure evolution and mechanical properties of Al/Cu ultrasonic spot welded joints during thermal processing. J. Manuf. Process. 41, 307 (2019)

A. Abdollahzadeh, A. Shokuhfar, J.M. Cabrera, A.P. Zhilyaev, H. Omidvar, The effect of changing chemical composition in dissimilar Mg/Al friction stir welded butt joints using zinc interlayer. J. Manuf. Process. 34, 18 (2018)

C. Chen, L. Kong, M. Wang, A.S. Haselhuhn, D.R. Sigler, H.P. Wang, B.E. Carlson, The robustness of Al-steel resistance spot welding process. J. Manuf. Process. 43, 300 (2019)

A.A. Fallahi, A. Shokuhfar, A. OstovariMoghaddam, A. Abdolahzadeh, Analysis of SiC nano-powder effects on friction stir welding of dissimilar Al-Mg alloy to A316L stainless steel. J. Manuf. Process. 30, 418 (2017)

P. Sharma, D.K. Dwivedi, A-TIG welding of dissimilar P92 steel and 304H austenitic stainless steel: mechanisms, microstructure and mechanical properties. J. Manuf. Process. 44, 166 (2019)

X. Hao, H. Dong, P. Li, Y. Xia, Dissimilar joining of TC4 alloy to ST16 steel by GTAW. J. Manuf. Process. 37, 413 (2019)

L. Zhou, R.X. Zhang, G.H. Li, W.L. Zhou, Y.X. Huang, X.G. Song, Effect of pin profile on microstructure and mechanical properties of friction stir spot welded Al-Cu dissimilar metals. J. Manuf. Process. 36, 1 (2018)

S. Yan, Y. Shi, Influence of laser power on microstructure and mechanical property of laser-welded Al/Cu dissimilar lap joints. J. Manuf. Process. 45, 312 (2019)

R. Yuan, S. Deng, H. Cui, Y. Chen, F. Lu, Interface characterization and mechanical properties of dual beam laser welding-brazing Al/steel dissimilar metals. J. Manuf. Process. 40, 37 (2019)

T. Zhang, W. Wang, J. Zhou, Z. Yan, J. Zhang, Interfacial characteristics and nano-mechanical properties of dissimilar 304 austenitic stainless steel/AZ31B Mg alloy welding joint. J. Manuf. Process. 42, 257 (2019)

H.A. Khan, W.M. Wang, K. Wang, S. Li, S. Miller, J. Li, Investigation of mechanical behavior of dissimilar material FSBR joints exposed to a marine environment. J. Manuf. Process. 37, 376 (2019)

Y. Li, X. Liu, Vacuum Science and Technology for Accelerator Vacuum Systems (Cornell University, New York, 2013)

F. Bertinelli, G. Favre, L. M. A. Ferreira, S. Mathot, L. Rossi, F. Savary, and E. Boter, Design and fabrication of superfluid helium heat exchanger tubes for the LHC superconductor magnets. in Proc. EPAC (Lucerne, 2004), pp. 1837–1839

R. Singh, K.K. Pant, S. Lal, D.P. Yadav, S.R. Garg, V.K. Raghuvanshi, G. Mundra, Vacuum brazing of accelerator components. J. Phys: Conf. Ser. 390, 012025 (2012)

T. Uhlig, V. Fedorov, M. Elßner, G. Wagner, S. Weis, I.O.P. Conf, Reduction of liquid metal embrittlement in copper-brazed stainless steel joints. Ser. Mater. Sci. Eng. 181, 012032 (2017)

S. Chen, J. Huang, J. Xia, H. Zhang, X. Zhao, Microstructural characteristics of a stainless steel/copper dissimilar joint made by laser welding. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 44, 3690 (2013)

M. Liebson, Brazing stainless steel to copper. Rev. Sci. Instrum. 30, 369 (1959)

K.P. Singh, S.S. Khirwadkar, K. Bhope, N. Patel, P. Mokaria, Feasibility study on joining of multi-layered W/Cu-CuCrZr-SS316L-SS316L materials using vacuum brazing. Fusion Eng. Des. 127, 73 (2018)

H. Nishi, K. Kikuchi, Influence of brazing conditions on the strength of brazed joints of alumina dispersion-strengthened copper to 316 stainless steel. J. Nucl. Mater. 258–263, 281 (1998)

R.K. Roy, S. Singh, M.K. Gunjan, A.K. Panda, A. Mitra, Joining of 304SS and pure copper by rapidly solidified Cu-based braze alloy. Fusion Eng. Des. 86, 452 (2011)

J. Kar, S.K. Dinda, G.G. Roy, S.K. Roy, P. Srirangam, X-ray tomography study on porosity in electron beam welded dissimilar copper–304SS joints. Vacuum 149, 200 (2018)

S. Tosto, F. Nenci, H. Jiandong, G. Corniani, F. Pierdominici, Microstructure of copper–AISI type 304L electron beam welded alloy. Mater. Sci. Technol. 19, 519 (2003)

T.A. Mai, A.C. Spowage, Characterisation of dissimilar joints in laser welding of steel-kovar, copper-steel and copper-aluminium. Mater. Sci. Eng., A 374, 224 (2004)

G. Phanikumar, S. Manjini, P. Dutta, J. Mazumder, K. Chattopadhyay, Characterization of a continuous CO2 laser-welded Fe-Cu dissimilar couple. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 36, 2137 (2005)

M. Sahul, M. Sahul, M. Turňa, P. Zacková, Disk laser welding of copper to stainless steel. Adv. Mater. Res. 1077, 76 (2014)

B.R. Moharana, S.K. Sahu, S.K. Sahoo, R. Bathe, Experimental investigation on mechanical and microstructural properties of AISI 304 to Cu joints by CO2 laser. Eng. Sci. Technol. an Int. J. 19, 684 (2016)

S. Chen, J. Huang, J. Xia, X. Zhao, S. Lin, Influence of processing parameters on the characteristics of stainless steel/copper laser welding. J. Mater. Process. Technol. 222, 43 (2015)

M. Weigl, M. Schmidt, Influence of the feed rate and the lateral beam displacement on the joining quality of laser-welded copper-stainless steel connections. Phys. Procedia 5, 53 (2010)

A. Durgutlu, B. Gülenç, F. Findik, Examination of copper/stainless steel joints formed by explosive welding. Mater. Des. 26, 497 (2005)

F. Findik, Recent developments in explosive welding. Mater. Des. 32, 1081 (2011)

K.D. Leedy, J.F. Stubbins, Copper alloy–stainless steel bonded laminates for fusion reactor applications: tensile strength and microstructure. Mater. Sci. Eng., A 297, 10 (2001)

D.W. Lee, Y.D. Bae, S.K. Kim, B.G. Hong, H.K. Jung, J.Y. Park, Y.H. Jeong, B.K. Choi, High heat flux test with HIP bonded 50x50 Be/Cu mock-ups for the ITER first wall. Fusion Sci. Technol. 56, 48 (2009)

J.Y. Park, B.K. Choi, J.S. Lee, D.W. Lee, B.G. Hong, Y.H. Jeong, Fabrication of Be/CuCrZr/SS mock-ups for ITER first wall. Fusion Eng. Des. 84, 1468 (2009)

P. Lorenzetto, B. Boireau, C. Boudot, P. Bucci, A. Furmanek, K. Ioki, J. Liimatainen, A. Peacock, P. Sherlock, S. Tähtinen, Manufacture of blanket shield modules for ITER. Fusion Eng. Des. 75–79, 291 (2005)

S. Patra, K.S. Arora, M. Shome, S. Bysakh, Interface characteristics and performance of magnetic pulse welded copper-steel tubes. J. Mater. Process. Technol. 245, 278 (2017)

Y. Kaya, N. Kahraman, A. Durgutlu, B. Gülenç, a novel approach to diffusion bonding of copper to stainless steel. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 226, 478 (2012)

X. Yuan, K. Tang, Y. Deng, J. Luo, G. Sheng, Impulse pressuring diffusion bonding of a copper alloy to a stainless steel with/without a pure nickel interlayer. Mater. Des. 52, 359 (2013)

W.-B. Lee, M. Schmuecker, U.A. Mercardo, G. Biallas, S.-B. Jung, Interfacial reaction in steel–aluminum joints made by friction stir welding. Scr. Mater. 55, 355 (2006)

O. Yilmaz, M. Aksoy, Investigation of micro-crack occurrence conditions in diffusion bonded Cu-304 stainless steel couple. J. Mater. Process. Technol. 121, 136 (2002)

H. Nishi, T. Araki, Low cycle fatigue strength of diffusion bonded joints of alumina dispersion-strengthened copper to stainless steel. J. Nucl. Mater. 283–287, 1234 (2000)

A.Z. Sahin, B.S. Yibaş, M. Ahmed, J. Nickel, Analysis of the friction welding process in relation to the welding of copper and steel bars. J. Mater. Process. Technol. 82, 127 (1998)

M. Vinoth Kumar, V. Balasubramanian, Microstructure and tensile properties of friction welded SUS 304HCu austenitic stainless steel tubes. Int. J. Press. Vessel. Pip. 113, 25 (2014)

A.J. Ramirez, D.M. Benati, H.C. Fals, Effect of tool offset on dissimilar Cu-AISI 316 stainless steel friction stir welding. Proc. 21th Int. Offshore Polar Eng. Conf. 8, 548 (2011)

Y. Imani, M.K. BesharatiGivi, M. Guillot, Improving friction stir welding between copper and 304L stainless steel. Adv. Mater. Res. 409, 263 (2011)

V. Shokri, A. Sadeghi, M.H. Sadeghi, Thermo mechanical modeling of friction stir welding in a Cu-DSS dissimilar joint. J. Manuf. Process. 31, 46 (2018)

K. Srinivas, R. Saranarayanan, A.K. Lakshminarayanan, N. Srinivasan, B. Venkatraman, Zone wise properties of friction stir welded copper–stainless steel joints using digital image correlation. Appl. Mech. Mater. 787, 485 (2015)

A. Najafkhani, H. Abbaszadeh, Evaluation of microstructure and mechanical properties of friction stir welded copper/316L stainless steel dissimilar metals. Int J Iron Steel Soc. 7, 21 (2010)

C. Roy, V.V. Pavanan, G. Vishnu, P.R. Hari, M. Arivarasu, M. Manikandan, D. Ramkumar, N. Arivazhagan, Characterization of metallurgical and mechanical properties of commercially pure copper and AISI 304 dissimilar weldments. Mater. Sci. 5, 2503 (2014)

M. Velu, S. Bhat, Metallurgical and mechanical examinations of steel–copper joints arc welded using bronze and nickel-base superalloy filler materials. Mater. Des. 47, 793 (2013)

C.C. Chang, L.H. Wu, C. Shueh, C.K. Chan, I.C. Shen, C.K. Kuan, Evaluation of microstructure and mechanical properties of dissimilar welding of copper alloy and stainless steel. Int. J. Adv. Manuf. Technol. 91, 2217 (2017)

S.G. Shiri, M. Nazarzadeh, M. Sharifitabar, M.S. Afarani, Gas tungsten arc welding of CP-copper to 304 stainless steel using different filler materials. Trans. Nonferrous Met. Soc. China 22, 2937 (2012)

A. Munitz, Metastable liquid phase separation in tungsten inert gas and electron beam copper/stainless-steel welds. J. Mater. Sci. 30, 2901 (1995)

K. Devendranath Ramkumar, S.V. Naren, V.R. Karthik Paga, A. Tiwari, N. Arivazhagan, Development of pulsed current gas tungsten arc welding technique for dissimilar joints of marine grade alloys. J. Manuf. Process. 21, 201 (2016)

B.Y.W.A. Baeslack, Unmixed zone formation in austenitic stainless steel weldments. Weld. Res. Suppl. 58, 168 (1979)

Y. Cui, C.L. Xu, Q. Han, Effect of ultrasonic vibration on unmixed zone formation. Scr. Mater. 55, 975 (2006)

J. Xin, Y. Song, C. Fang, J. Wei, C. Huang, S. Wang, Evaluation of inter-granular corrosion susceptibility in 316LN austenitic stainless steel weldments. Fusion Eng. Des. 133, 70 (2018)

V. Shankar, T.P.S. Gill, S.L. Mannan, S. Sundarlsan, Solidification cracking in austenitic stainless steel welds. Sadhana Acad. Proc. Eng. Sci. 28, 359 (2003)