Metallographic Methods for Revealing the Multiphase Microstructure of TRIP-Assisted Steels

Materials Characterization - Tập 40 Số 2 - Trang 111-118 - 1998
Etienne Girault1, Pascal Jacques2, Ph. Harlet3, Koen Mols4, Jan Van Humbeeck1, Etienne Aernoudt1, Francis Delannay2
1Department of Metallurgy and Materials Engineering, K.U. Leuven, de Croylaan 2, B-3001 Leuven, Belgium
2Département des Sciences des matériaux et des procédés, PCIM, Université catholique de Louvain, Place Sainte Barbe 2, B-1348 Louvain-la-Neuve, Belgium
3R&D Cockerill-Sambre, Domaine universitaire du Sart Tilman P57, B-4000 Liège, Belgium
4OCAS—Research Center of the Sidmar Group, John Kennedylaan 3, B-9060 Zelzate, Belgium

Tóm tắt

Từ khóa


Tài liệu tham khảo

G. F. Vander Voort: Metallography: Principles and Practice. McGraw-Hill, New York, pp. 166–172 (1984).

G. F. Vander Voort: Metallography: Principles and Practice. McGraw-Hill, New York, pp. 632–655 (1984).

Ray, 1996, Microstructural manifestations in color, Mater. Char, 37, 1, 10.1016/S1044-5803(96)00022-8

G. F. Vander Voort: Metallography: Principles and Practice. McGraw-Hill, New York, pp. 216–217 (1984).

W. Ch. Jeong: New Techniques for Observation of Retained Austenite in High Strength Dual-Phase and TRIP Cold-Rolled Sheet Steels. Proc. Symp. on High-Strength Sheet Steels for the Automotive Industry, Baltimore, MD (October 16–19, 1994).

Chen, 1994, Effect of alloying elements upon austenite decomposition in low-C steels, Metall. Trans. A, 25, 1367, 10.1007/BF02665470

Matsumura, 1987, Enhancement of elongation by retained austenite in intercritical annealed 0.4C-1.5Si-0.8Mn steel, Trans. ISIJ, 27, 570, 10.2355/isijinternational1966.27.570

LePera, 1980, Improved etching technique to emphasize martensite and bainite in high-strength dual-phase steel, J. Metall, 32, 38

C. F. Jatczak, J. A. Larson, and S. W. Shin: Retained Austenite and Its Measurements by X-ray Diffraction. Society of Automotive Engineers, Inc. Warrendale, PA (1980).

Ridley, 1969, Lattice parameters of Fe-C austenites at room temperature, Trans. TMS-AIME, 245, 1834

Ruhl, 1969, Splat quenching of iron-carbon alloys, Trans. TMS-AIME, 245, 241

Irvine, 1961, High-strength austenitic stainless steels, J. Iron Steel Inst, 199, 153

Speich, 1981, Formation of austenite during intercritical annealing of dual-phase steels, Metall. Trans. A, 12, 1419, 10.1007/BF02643686

G. R. Speich and R. L. Miller: Tempering of Ferrite-Martensite Steels. Proc. Symp. on Fundamentals of Dual-Phase Steels, Chicago, IL (February 23–24, 1981).

Huang, 1994, Retained austenite in low carbon, manganese steel after intercritical heat treatment, Mater. Sci. Technol, 10, 621, 10.1179/mst.1994.10.7.621

Rao, 1983, Direct observation of deformation-induced retained austenite transformation in a vanadium-containing dual phase steel, Metallography, 16, 19, 10.1016/0026-0800(83)90042-3

J. M. Rigsbee and P. J. VanderArend: Laboratory Studies of Microstructure and Structure-Property Relationships in “Dual Phase” HSLA Steel. Proc. Symp. on Formable HSLA and Dual Phase Steels, Chicago, IL (October 26, 1977).

J. M. Rigsbee: Inhibition of the Martensitic Transformation of Small Austenite Particles in Low-Alloy Steels. Proc. Int. Conf. on Martensitic Transformations ICOMAT 1979, Cambridge, MA (June 24–29, 1979).

G. R. Speich and K. A. Taylor: Tempering of ferrous martensites. In Martensite, G. B. Olson and W. S. Owen, eds., ASM International, Materials Park, OH, pp. 243–276 (1992).