Mercury removal from the flue gases of crematoria via pre-injection of lime and activated carbon into a fabric filter

Process Safety and Environmental Protection - Tập 148 - Trang 323-332 - 2021
Masaki Takaoka1, Yingchao Cheng1,2, Kazuyuki Oshita1, Tomoaki Watanabe3, Shoji Eguchi4
1Department of Environmental Eng., Graduate School of Eng., Kyoto University, C-cluster, Kyoto Daigaku Katsura, Nishikyo-ku, Kyoto, 615-8540, Japan
2Center for Material Cycles and Waste Management Research, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki 305-8506, Japan
3Nippon Instruments Corporation, 14-8, Akaoji-cho, Takatsuki, Osaka, 569-1146, Japan
4Taiyo Chikuro Industries Co., ltd., 6-21, Higashi Kouen, Hakata-ku, Fukuoka, 812-0045, Japan

Tài liệu tham khảo

Cheng, 2020, Characterizing the mechanisms of gas-phase elemental mercury adsorption with iodine-impregnated activated carbons using Brunauer-Emmett-Teller analysis, X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption near-edge structure analysis, Chem. Eng. J., 402, 10.1016/j.cej.2020.126225 DEFRA, 2012, Process guidance note 5/2 (12) Domoto, 2006, Mercury emission from crematory, J. Jap. Soc. Atmospheric Environ., 41, 309 European Commission -DG ENV, 2012 Hall, 1991, Chemical reaction of mercury in combustion flue gases, Water Air Soil Pollut., 56, 3, 10.1007/BF00342256 Hogland, 1994, Usefulness of Selemium for the reduction of mercury emissions from Crematoria, J. Environ. Qual., 23, 1364, 10.2134/jeq1994.00472425002300060033x Kilgroe, 1996, Control of dioxin, furan, and mercury emissions from municipal waste combustors, J. Hazard. Mater., 47, 163, 10.1016/0304-3894(95)00108-5 Krishnakumar, 2007, Understanding mercury transformations in coal-fired power plants: evaluation of homogeneous Hg oxidation mechanisms, Environ. Sci. Technol., 41, 7870, 10.1021/es071087s Krlshnan, 1994, Sorption of elemental mercury by activated carbons, Environ. Sci. Technol., 28, 1506, 10.1021/es00057a020 Mari, 2010, Toxic emissions from crematories: a review, Environ. Int., 36, 131, 10.1016/j.envint.2009.09.006 Mills, 1990, Mercury and crematorium chimneys, Nature, 346, 615, 10.1038/346615a0 Nagao, 2016, Development of effective mercury removal from flue gas of solid waste incinerator, Proceeding of the 27th Annual Conference of Japan Society of Material Cycles and Waste Management Experts, 345 Niksa, 2001, Kinetic modelling of homogeneous mercury oxidation: the importance of NO and H2O in predicting oxidation in coal-derived systems, Environ. Sci. Technol., 35, 3701, 10.1021/es010728v Oshita, 2012, Behaviour of acidic gas, mercury and fine particles emitted from a crematorium, J. EICA., 17, 116 Oshita, 2013, Behaviour of acidic gas, mercury and fine particles emitted from a crematorium – part 2, J. EICA., 18, 32 Panyametheekul, 1999, Mercury levels in soils in the vicinity of a crematorium in North London, United Kingdom, Geochem. Earth’s Surf., 219 Que, 2001, Radiation safety issues regarding the cremation of the body of an I-125 prostate implant patient, J. Appl. Clin. Med. Phys., 2, 174, 10.1120/1.1385868 Romero, 2020, New insights on mercury abatement and modeling in a full-scale municipal solid waste incineration flue gas treatment unit, Waste Manag., 113, 270, 10.1016/j.wasman.2020.06.003 Sano, 2017, Vapor-phase elemental mercury adsorption by activated carbon co-impregnated with sulfur and chlorine, Chem. Eng. J., 315, 598, 10.1016/j.cej.2017.01.035 Santarsieroa, 2005, Urban crematoria emissions as they stand with current practice, Microchem. J., 79, 299, 10.1016/j.microc.2004.10.016 Sato, 2015, Development of mercury removal technique in municipal solid waste incineration facilities, J. J. Waste Manage. Assoc., 68, 256 Smith, 2012, The potential dangers of medical devices with current cremation practices, Eur. Geriatr. Med., 3, 97, 10.1016/j.eurger.2012.01.013 Sololewski, 2020, Mercury measurements in crematoria, Pharos Int., 86, 36 Sowlat, 2017, A systematic review on the efficiency of cerium-impregnated activated carbons for the removal of gas-phase, elemental mercury from flue gas, Environ. Sci. Pollut. Res., 24, 12092, 10.1007/s11356-017-8559-7 Takaoka, 2002, Control of Mercury Emissions from a municipal solid waste incinerator in Japan, J. Air Waste Manage. Assoc., 52, 931, 10.1080/10473289.2002.10470831 Takaoka, 2010, Mercury emission from crematories in Japan, Atoms. Chem. Phys., 10, 3665, 10.5194/acp-10-3665-2010 Takaoka, 2018, Mercury behaviour in flue gas from sewage sludge incinerators and melting furnace, Water Sci. Technol., 2017, 782, 10.2166/wst.2018.268 Takeda, 2000, PCDDs/DFs emissions from crematories in Japan, Chemosphere, 40, 575, 10.1016/S0045-6535(99)00232-5 Takeda, 2001, Measures to prevent emissions of PCDDs/DFs and co-planar PCBs from crematories in Japan, Chemosphere, 43, 763, 10.1016/S0045-6535(00)00431-8 Takeda, 2014, PCDD/DF and co-planar PCBs Emissions from crematories in Japan, Chemosphere, 98, 91, 10.1016/j.chemosphere.2013.09.114 The Cremation Society, 2020 Thompson, 2009, Sorbent injection into a slipstream baghouse for mercury control: project summary, Fuel Process. Technol., 90, 1392, 10.1016/j.fuproc.2009.06.016 United Nations Environment Programme/Arctic Monitoring and Assessment Programme, 2019 Witt, 2010, Aerosol trace metals, particle morphology and total gaseous mercury in the atmosphere of oxford, UK, Atmos. Environ., 44, 1524, 10.1016/j.atmosenv.2010.01.008 Xue, 2016, Present and future emissions of HAPs from crematories in China, Atmos. Environ., 124, 28, 10.1016/j.atmosenv.2015.10.079 Xue, 2018, Emission characteristics of harmful air pollutants from cremators in Beijing, China, PLoS One, 13, 10.1371/journal.pone.0194226 Yang, 2007, Adsorbents for capturing mercury in coal-fired boiler flue gas, J. Hazard. Mater., 146, 1, 10.1016/j.jhazmat.2007.04.113