Mechanical strength of various cyanate ester/epoxy insulation systems after fast neutron irradiation to the ITER design fluence and beyond

Bittner-Rohrhofer, 2003, Radiation hardness of newly developed ITER relevant insulation systems, Fusion Eng. Des., 66–68, 1209, 10.1016/S0920-3796(03)00343-0

Bittner-Rohrhofer, 2004, Radiation effects on the mechanical integrity of novel organic insulators for the ITER magnet coils, J. Nucl. Mater., 329–333, 1083, 10.1016/j.jnucmat.2004.04.025

Fabian, 2004, Low temperature mechanical properties of cyanate ester insulation systems after irradiation., 289

Prokopec, 2006, Static and dynamic performance of newly developed ITER relevant insulation systems after neutron irradiation, 342

Prokopec, 2006, Mechanical performance of cyanate ester based insulation systems under ITER relevant conditions, J. Phys. Conf. Ser., 43, 739, 10.1088/1742-6596/43/1/181

R. Prokopec, K. Humer, R.K. Maix, H. Fillunger, and H.W. Weber, Mechanical strength of alternative ITER magnet insulation systems after reactor irradiation, ICMC 2006, Prague, Czech Republic, 17–21 July 2006, submitted for publication.

Rosenkranz, 2000, Influence of the test geometry on the fatigue behavior of fiber reinforced plastics in tension and interlaminar shear at RT and 77K, Adv. Cryog. Eng., 46, 181

Weber, 1986, Neutron dosimetry and damage calculations for the TRIGA Mark-II reactor in Vienna, J. Nucl. Mater., 137, 236, 10.1016/0022-3115(86)90225-4

R. Prokopec, K. Humer, and H.W. Weber, Fatigue behavior of an insulation system for the ITER magnets in the load and strain controlled mode, SOFT 2006, Warsaw, Poland, 11–15 September 2006, submitted for publication.