Mechanical response and microstructure investigation of a mineral and rubber modified polypropylene

Parsons, 2005, Three-dimensional large-strain tensile deformation of neat and calcium carbonate-filled high-density polyethylene, Polymer, 46, 2257, 10.1016/j.polymer.2005.01.045 Bartczak, 1998, Toughness mechanism in semi-crystalline polymer blends: I. High density polyethylene toughened with rubbers, Polymer, 40, 2331, 10.1016/S0032-3861(98)00445-5 G’Sell, 1983, Effect of stress triaxiality on neck propagation during the tensile stretching of solid polymers, Journal of Material Science, 18, 1731, 10.1007/BF00542069 Marquez-Lucero, 1989, Experimental investigation of neck propagation in polymers, Polymer, 30, 636, 10.1016/0032-3861(89)90147-X Mohanraj, 2006, Plastic deformation and damage of polyoxymethylene in the large strain range at elevated temperatures, Polymer, 47, 5852, 10.1016/j.polymer.2006.06.008 Arruda, 1997, Rate dependent deformation of semi-crystalline polypropylene near room temperature, Journal of Engineering Materials and Technology, 119, 216, 10.1115/1.2812247 Soong, 2006, Rate-dependent deformation behavior of POSS-filled and plasticized poly(vinyl chloride), Macromolecules, 39, 2900, 10.1021/ma052736s V. Delhaye, A.H. Clausen, F. Moussy, R. Othman, O.S. Hopperstad, Influence of stress state and strain rate on the behaviour of a rubber-particle reinforced polypropylene, in press. Moura, 2010, Impact on HDPE and PVC plates – experimental tests and numerical simulations, International Journal of Impact Engineering, 37, 580, 10.1016/j.ijimpeng.2009.12.004 Fu, 2009, Tension testing of polycarbonate at high strain rates, Polymer Testing, 28, 724, 10.1016/j.polymertesting.2009.06.002 Chen, 2002, Tension and compression tests of two polymers under quasi-static and dynamic loading, Polymer Testing, 21, 113, 10.1016/S0142-9418(01)00055-1 Bartczak, 1998, Toughness mechanism in semi-crystalline polymer blends: II. High density polyethylene toughened with calcium carbonate filler, Polymer, 40, 2347, 10.1016/S0032-3861(98)00444-3 Bai, 2005, Polypropylene/polyamide 6/polyethylene-octene elastomer blends. Part 3. Mechanisms of volume dilatation during plastic deformation under uniaxial tension, Polymer, 46, 6437, 10.1016/j.polymer.2005.03.111 Brough, 2004, Scanning electron micrographs of high density polyethylene fracture surfaces, Polymer, 45, 3115, 10.1016/j.polymer.2004.02.036 G’Sell, 2002, Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking, International Journal of Solids and Structures, 39, 3857, 10.1016/S0020-7683(02)00184-1 Zhao, 2006, An experimental study of square tube crushing under impact loading using a modified large scale SHPB, International Journal of Impact Engineering, 32, 1174, 10.1016/j.ijimpeng.2004.09.013 Bussac, 2002, An optimisation method for separating and rebuilding one-dimensional dispersive waves from multi-point measurements. Application to elastic or viscoelastic bars, Journal of the Mechanics and Physics of Solids, 50, 321, 10.1016/S0022-5096(01)00057-6 Klepaczko, 1999, Quasi-static and dynamic shearing of sheet metals, European Journal of Mechanics - A/Solids, 18, 271, 10.1016/S0997-7538(99)80016-3 Zuidema, 2008, Polymer injection molding: flow-induced crystallisation, Encyclopedia of Materials: Science and Technology, 7364 Muratoglu, 1995, Crystalline morphology of polyamide-6 near planar surfaces, Polymer, 36, 2143, 10.1016/0032-3861(95)95289-D Muratoglu, 1995, Microstructural processes of fracture of rubber-modified polyamides, Polymer, 36, 4771, 10.1016/0032-3861(95)99293-4 Galeski, 2003, Strength and toughness of crystalline polymer systems, Progress in Polymer Science, 28, 1643, 10.1016/j.progpolymsci.2003.09.003 Peterlin, 1972, Plastic deformation of unoriented polymer under tensile load, Advances in Polymer Science and Engineering, 13, 1 Huang, 2005, Size effect on stress concentration induced by a prolate ellipsoidal particle and void nucleation mechanism, International Journal of Plasticity, 21, 1568, 10.1016/j.ijplas.2004.07.006 Steenbrink, 1997, Void growth in glassy polymers, Journal of the Mechanics and Physics of Solids, 45, 405, 10.1016/S0022-5096(96)00093-2 Pijnenburg, 2001, Macroscopic yield in cavitated polymer blends, International Journal of Solids and Structures, 38, 3575, 10.1016/S0020-7683(00)00227-4 Pawlak, 2005, Plastic deformation of crystalline polymers: the role of cavitation and crystal plasticity, Macromolecules, 38, 9688, 10.1021/ma050842o