Mechanical recycling of an end-of-life automotive composite component

Schoer, 2012, Raw material consumption of the European Union—concept, calculation method, and results, Environ. Sci. Technol., 46, 8903, 10.1021/es300434c Azapagic, 2003 Council of the European Parliament, 2009 Chawla, 2012 Rybicka, 2015, Capturing composites manufacturing waste flows through process mapping, J. Clean. Prod., 91, 251, 10.1016/j.jclepro.2014.12.033 Nahil, 2011, Recycling of carbon fibre reinforced polymeric waste for the production of activated carbon fibres, J. Anal. Appl. Pyrolysis, 91, 67, 10.1016/j.jaap.2011.01.005 Perrin, 2008, Optimizing a recycling process of SMC composite waste, Waste Manag., 28, 541, 10.1016/j.wasman.2007.03.026 Council of the European Parliament, 2000 Pickering, 2016, A review of recent developments in natural fibre composites and their mechanical performance, Compos. A Appl. Sci. Manuf., 83, 98, 10.1016/j.compositesa.2015.08.038 Yang, 2012, Recycling of composite materials, Chem. Eng. Process. Process Intensif., 51, 53, 10.1016/j.cep.2011.09.007 Oliveux, 2015, Current status of recycling of fibre reinforced polymers: review of technologies, reuse and resulting properties, Prog. Mater. Sci., 72, 61, 10.1016/j.pmatsci.2015.01.004 Bernasconi, 2007, Analysis of the effect of mechanical recycling upon tensile strength of a short glass fibre reinforced polyamide 6,6, Eng. Fract. Mech., 74, 627, 10.1016/j.engfracmech.2006.10.002 Cunliffe, 2003, Pyrolysis of composite plastic waste, Environ. Technol., 24, 653, 10.1080/09593330309385599 Meyer, 2009, CFRP-recycling following a pyrolysis route: process optimization and potentials, J. Compos. Mater., 43, 1121, 10.1177/0021998308097737 Abdou, 2016, Recovering of carbon fiber present in an industrial polymeric composite waste through pyrolysis method while studying the influence of resin impregnation process: prepreg, 313 Howarth, 2014, Energy intensity and environmental analysis of mechanical recycling of carbon fibre composite, J. Clean. Prod., 81, 46, 10.1016/j.jclepro.2014.06.023 Talib, 2010, Developing a hybrid, carbon/glass fiber-reinforced, epoxy composite automotive drive shaft, Mater. Des., 31, 514, 10.1016/j.matdes.2009.06.015 Wycech, 1990 Freeman, 1994 Colucci, 2017, Effect of recycling on polypropylene composites reinforced with glass fibres, J. Thermoplast. Compos. Mater., 30, 707, 10.1177/0892705715610407 Colucci, 2015, The effect of mechanical recycling on the microstructure and properties of PA66 composites reinforced with carbon fibers, J. Appl. Polym. Sci., 132, 1, 10.1002/app.42275 Braun, 2007, Flame retardancy mechanisms of aluminium phosphinate in combination with melamine polyphosphate and zinc borate in glass-fibre reinforced polyamide 6, 6, Polym. Degrad. Stab., 92, 1528, 10.1016/j.polymdegradstab.2007.05.007 Gonçalves, 2007, Mechanism of the temperature-dependent degradation of polyamide 66 films exposed to water, Polym. Degrad. Stab., 92, 1977, 10.1016/j.polymdegradstab.2007.08.007 Frihi, 2016, Crystallization of glass-fiber-reinforced polyamide 66 composites: influence of glass-fiber content and cooling rate, Compos. Sci. Technol., 130, 70, 10.1016/j.compscitech.2016.05.007 Naik, 2013, Melamine integrated metal phosphates as non-halogenated flame retardants: synergism with aluminium phosphinate for flame retardancy in glass fiber reinforced polyamide 66, Polym. Degrad. Stab., 98, 2653, 10.1016/j.polymdegradstab.2013.09.029 Sanatgar, 2012, The influence of solvent type and polymer concentration on the physical properties of solid state polymerized PA66 nanofiber yarn, J. Appl. Polym. Sci., 126, 1112, 10.1002/app.36871 Colclough, 1978, Polymorphism in nylon 66, J. Mater. Sci., 13, 2531, 10.1007/PL00020144 Bunn, 1947, The crystal structures of two polyamides (‘nylons’), Proc. R. Soc. London. Ser. A. Math. Phys. Sci., 189, 39, 10.1098/rspa.1947.0028 Todoki, 1977, Origin of double melting peaks in drawn nylon 6 yarns, J. Polym. Sci. Polym. Phys. Ed., 15, 1067, 10.1002/pol.1977.180150613 Ishikawa, 1980, Thermal behavior of α nylon-12, J. Polym. Sci. Polym. Phys. Ed., 18, 1413, 10.1002/pol.1980.180180619 White, 1955, Melting behaviour of crystalline polymer fibres, Nature, 175, 895, 10.1038/175895a0 Klein, 1995, The effects of a nucleating agent and of fibers on the crystallization of nylon 66 matrices, Polym. Compos., 16, 189, 10.1002/pc.750160302 Marcellan, 2003, Micro-mechanisms, mechanical behaviour and probabilistic fracture analysis of PA 66 fibres, J. Mater. Sci., 38, 2117, 10.1023/A:1023711710909 Hedicke, 2006, Crystallisation behaviour of Polyamide-6 and Polyamide-66 nanocomposites, Compos. Sci. Technol., 66, 571, 10.1016/j.compscitech.2005.05.023 Vaxman, 1989, Short-fiber-reinforced thermoplastics. Part III: effect of fiber length on rheological properties and fiber orientation, Polymer (Guildf)., 10, 454 Cruz, 2018, Effect of aspect ratio on electrical, rheological and glass transition properties of PC/MWCNT nanocomposites, J. Nanosci. Nanotechnol., 18, 943, 10.1166/jnn.2018.13950 Arrigo, 2017, Rheological percolation threshold in high-viscosity polymer/CNTs nanocomposites, J. Eng. Mech., 143, 10.1061/(ASCE)EM.1943-7889.0001096 Fu, 1996, Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers, Compos. Sci. Technol., 56, 1179, 10.1016/S0266-3538(96)00072-3 Nairn, 1997, On the use of shear-lag methods for analysis of stress transfer in unidirectional composites, Science (80-), 26, 63 Vlasveld, 2005, Fibre-matrix adhesion in glass-fibre reinforced polyamide-6 silicate nanocomposites, Compos. A Appl. Sci. Manuf., 36, 1, 10.1016/S1359-835X(04)00186-1 Radici Group Ascend Performance Materials