Mechanical properties of carbon fiber-reinforced Al2O3 porous ceramics

A.R. Studart, U.T. Gonzenbach, E. Tervoort, L.J. Gauckler, Processing routes to macroporous ceramics: a review. J. Am. Ceram. Soc. 89(6), 1771–1789 (2006)

T. Shimizua, K. Matsuura, H. Furuea, K. Matsuzaka, Thermal conductivity of high porosity alumina refractory bricks made by a slurry gelation and foaming method. J. Eur. Ceram. Soc. 33(15–16), 3429–3435 (2013)

S. Meille, M. Lombardi, J. Chevalier, L. Montanaro, Mechanical properties of porous ceramics in compression: on the transition between elastic, brittle, and cellular behavior. J. Eur. Ceram. Soc. 32, 3959–3967 (2012)

E.R. Bagherian, Development of a ceramic foam filter for filtering molten aluminium alloy in casting processes. Int. J. Res. Eng. Technol. 4(3), 27–43 (2015)

J. Geus, J. Van Giezen, Catalysts supported by porous ceramic layers on ceramic or metallic substrates. MRS Proc. 454, 147–153 (1996)

R.S. Barhate, S. Ramakrishna, Filtration problems and solutions from tiny materials. J. Membr. Sci. 296(1, 2), 1–8 (2007)

K.S. Chou, T.K. Lee, F.J. Liu, Sensing mechanism of a porous ceramic as humidity sensor. J. Adv. Ceram. Soc. 56(12), 106–111 (1999)

H. Takahara, The sound absorption characteristics of particulate porous ceramic materials. J. Adv. Ceram. 41(3), 265–274 (1994)

B.S.M. Seeber, U.T. Gonzenbach, L.J. Gauckler, Mechanical properties of highly porous alumina foams. J. Mater. Res. 28(17), 2281–2287 (2013)

N. Sarkar, J.G. Park, S. Mazumder, A. Pokhrel, C.G. Aneziris, I.J. Kim, Effect of amphiphile chain length on wet foam stability of porous ceramics. Ceram. Int. 41, 4021–4027 (2015)

T. Ohji, M. Fukushima, Macro-porous ceramics: processing and properties. Int. Mater. Rev. 57, 115–131 (2012)

Y. Zhu, Z. Huang, S. Dong, M. Yuan, D. Jiang, Manufacturing 2D carbon-fiber-reinforced SiC matrix composites by slurry infiltration and PIP process. Ceram. Int. 34(5), 1201–1205 (2008)

F.W. Zok, C.G. Levi, Mechanical properties of porous-matrix ceramic composites. Adv. Eng. Mater. 3(1, 2), 1527–2648 (2001)

B.H. Kim, Y.H. Na, Fabrication of fiber-reinforced porous ceramics of Al2O3-mullite and SiC-mullite systems. Ceram. Int. 21, 381–384 (1995)

J. Wang, M.R. Piramoon, C.B. Ponton, P.M. Marquis, A study in short ahnnina fiber reinforced mullite composites. Brit. Ceram. Trans. 90(4), 105–110 (1991)

H. Liu, C. Li, X. Ren, K. Liu, J. Yang, Fine platinum nanoparticles supported on a porous ceramic membrane as efficient catalysts for the removal of benzene. Sci. Rep. 7, 16589 (2017)

B. Basnet, H.M. Lim, K.S. Lee, I.J. Kim, Effects of carbon fiber on mechanical Behaviour Al2O3 Porous Ceramics. J. Korean Ceram. Soc. 56(5), 513–520 (2019)

U.T. Gonzenbach, A.R. Studart, E. Tervoort, L.J. Gauckler, Macroporous ceramics from particle-stabilized wet foams. J. Am. Ceram. Soc. 90(1), 16 (2007)

I.J. Kim, J.G. Park, H.Y. Han, S.Y. Kim, J.F. Shackelford, Wet foam stability from colloidal suspension to porous ceramics: a review. J. Korean Ceram. Soc. 56(3), 211–232 (2019)

S. Meille, M. Lombardi, J. Chevalier, L. Montanar, Mechanical properties of porous ceramics in compression: on the transition between elastic, brittle, and cellular behaviour. J. Eur. Ceram. Soc. 32, 3959–3967 (2012)

B.R. Lawn, Indentation of ceramics with spheres: a century after Hertz. J. Am. Ceram. Soc. 81(8), 1977–1994 (1998)

K.S. Lee, S.K. Kim, T.W. Kim, S. Kim, I.S. Han, S.K. Woo, Cracking of densely coated layer adhesively bonded to porous substrates under Hertzian stress. J. Mater. Sci. 42, 9116–9120 (2007)

K.S. Lee, Y.G. Jung, I.M. Peterson, B.R. Lawn, Model for cyclic fatigue of quasi-plastic ceramics in contact with speres. J. Am. Ceram. Soc. 83(9), 2255–2262 (2000)