Mechanical metamaterials with topologies based on curved elements: An overview of design, additive manufacturing and mechanical properties

Fan, 2021, A review of additive manufacturing of metamaterials and developing trends, Mater. Today, 50, 303, 10.1016/j.mattod.2021.04.019 Nazir, 2019, A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures, Int. J. Adv. Manuf. Technol., 104, 3489, 10.1007/s00170-019-04085-3 Bhate, 2019, Classification and selection of cellular materials in mechanical design: engineering and biomimetic approaches, Designs, 3, 19, 10.3390/designs3010019 Ashby, 1983, The mechanical properties of cellular solids, Metall. Trans. A, Phys. Metall. Mater. Sci., 14A, 1755, 10.1007/BF02645546 Ashby, 2000 Han, 2018, An overview of materials with triply periodic minimal surfaces and related geometry: from biological structures to self-assembled systems, Adv. Mater., 30, 1, 10.1002/adma.201705708 Wagner, 2017, Large shape transforming 4D auxetic structures, 3D Print. Addit. Manuf., 4, 133, 10.1089/3dp.2017.0027 Rad, 2019, Analytical solution and finite element approach to the dense re-entrant unit cells of auxetic structures, Acta Mech., 230, 2171, 10.1007/s00707-019-02387-x Zhang, 2020, Large deformation and energy absorption of additively manufactured auxetic materials and structures: a review, Composites, Part B, Eng., 201, 10.1016/j.compositesb.2020.108340 Ha, 2018, Design, fabrication, and analysis of lattice exhibiting energy absorption via snap-through behavior, Mater. Des., 141, 426, 10.1016/j.matdes.2017.12.050 Tan, 2019, Novel multi-stable mechanical metamaterials for trapping energy through shear deformation, Int. J. Mech. Sci., 164, 10.1016/j.ijmecsci.2019.105168 Corsi, 2020, Additively manufactured negative stiffness structures for shock absorber applications, Mech. Adv. Mat. Struct., 1 Yang, 2018, Multi-stable mechanical metamaterials with shape-reconfiguration and zero Poisson's ratio, Mater. Des., 152, 181, 10.1016/j.matdes.2018.04.064 Alturki, 2019, Response characterization of multistable shallow domes with cosine-curved profile, Thin-Walled Struct., 140, 74, 10.1016/j.tws.2019.03.035 Jeong, 2020, 3D and 4D printing of multistable structures, Appl. Sci. (Switz.), 10, 1 Cuan-Urquizo, 2018, Flexural elasticity of woodpile lattice beams, Eur. J. Mech. A, Solids, 67, 187, 10.1016/j.euromechsol.2017.09.008 Refai, 2019, Determination of the effective elastic properties of titanium lattice structures, Mech. Adv. Mat. Struct., 27, 1966, 10.1080/15376494.2018.1536816 Cao, 2021, In-situ synchrotron X-ray tomography investigation of the imperfect smooth-shell cylinder structure, Compos. Struct., 267, 10.1016/j.compstruct.2021.113926 Tran, 2020, Triply periodic minimal surfaces sandwich structures subjected to shock impact, J. Sandw. Struct. Mater., 23, 2146, 10.1177/1099636220905551 Maskery, 2018, Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing, Polymer, 152, 62, 10.1016/j.polymer.2017.11.049 Wang, 2020, Numerical and experimental studies on compressive behavior of Gyroid lattice cylindrical shells, Mater. Des., 186, 10.1016/j.matdes.2019.108340 Maszybrocka, 2019, Modelling, manufacturability and compression properties of the CpTi grade 2 cellular lattice with radial gradient TPMS architecture, Bull. Pol. Acad. Sci., Tech. Sci., 67, 719 Downing, 2021, Increased efficiency gyroid structures by tailored material distribution, Mater. Des., 197, 10.1016/j.matdes.2020.109096 Feng, 2021, Isotropic porous structure design methods based on triply periodic minimal surfaces, Mater. Des., 210, 10.1016/j.matdes.2021.110050 Ma, 2020, Manufacturability, mechanical properties, mass-transport properties and biocompatibility of triply periodic minimal surface (TPMS) porous scaffolds fabricated by selective laser melting, Mater. Des., 195, 10.1016/j.matdes.2020.109034 Zhao, 2020, Mechanical and energy absorption characteristics of additively manufactured functionally graded sheet lattice structures with minimal surfaces, Int. J. Mech. Sci., 167, 10.1016/j.ijmecsci.2019.105262 AlMahri, 2021, Evaluation of the dynamic response of triply periodic minimal surfaces subjected to high strain-rate compression, Addit. Manuf., 46 Novak, 2020, Compressive behaviour of chiral auxetic cellular structures at different strain rates, Int. J. Impact Eng., 141, 10.1016/j.ijimpeng.2020.103566 Bonatti, 2019, Smooth-shell metamaterials of cubic symmetry: anisotropic elasticity, yield strength and specific energy absorption, Acta Mater., 164, 301, 10.1016/j.actamat.2018.10.034 Bonatti, 2019, Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: simulations & experiments, J. Mech. Phys. Solids, 122, 1, 10.1016/j.jmps.2018.08.022 Zhou, 2020, Sheet and network based functionally graded lattice structures manufactured by selective laser melting: design, mechanical properties, and simulation, Int. J. Mech. Sci., 175, 10.1016/j.ijmecsci.2020.105480 Berger, 2017, Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness, Nature, 543, 533, 10.1038/nature21075 Bhate, 2019, Four questions in cellular material design, Materials, 12, 1060, 10.3390/ma12071060 Gibson, 1982, The mechanics of two-dimensional cellular materials, Proc. R. Soc. Lond. A, 382, 25, 10.1098/rspa.1982.0087 Deng, 2021, Soap film inspired mechanical metamaterials approaching theoretical bound of stiffness across full density range, Mater. Horiz., 8, 987, 10.1039/D0MH01408G Ashby, 2006, The properties of foams and lattices, Philos. Trans. R. Soc. A, Math. Phys. Eng. Sci., 364, 15, 10.1098/rsta.2005.1678 Nairn, 2006, Numerical simulations of transverse compression and densification in wood, Wood Fiber Sci., 38, 576 Khrapov, 2021, Different approaches for manufacturing Ti-6Al-4V alloy with triply periodic minimal surface sheet-based structures by electron beam melting, Materials, 14, 10.3390/ma14174912 Gibson, 1982, The mechanics of three-dimensional cellular materials, Proc. R. Soc. Lond. Ser. A, Math. Phys. Sci., 382, 43 Bai, 2021, Mechanical properties of a Chiral cellular structure with semicircular beams, Materials, 14, 10.3390/ma14112887 Li, 2021, Regulation of notch sensitivity of lattice materials by strut topology, Int. J. Mech. Sci., 192, 10.1016/j.ijmecsci.2020.106137 Niknam, 2020, 3D printed accordion-like materials: a design route to achieve ultrastretchability, Addit. Manuf., 34 Wang, 2021, Cell-size graded sandwich enhances additive manufacturing fidelity and energy absorption, Int. J. Mech. Sci., 211, 10.1016/j.ijmecsci.2021.106798 Wu, 2021, Energy absorption of additively manufactured functionally bi-graded thickness honeycombs subjected to axial loads, Thin-Walled Struct., 164, 10.1016/j.tws.2021.107810 Yin, 2022, On bending crashworthiness of smooth-shell lattice-filled structures, Thin-Walled Struct., 171, 10.1016/j.tws.2021.108800 Askari, 2020, Additive manufacturing of metamaterials: a review, Addit. Manuf., 36 Nath, 2020, An overview of additive manufacturing of polymers and associated composites, Polymers, 12, 1, 10.3390/polym12112719 Uribe-Lam, 2021, Use of additive manufacturing for the fabrication of cellular and lattice materials: a review, Mater. Manuf. Process., 36, 257, 10.1080/10426914.2020.1819544 Yuan, 2019, Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: a review, Bioact. Mater., 4, 56, 10.1016/j.bioactmat.2018.12.003 Singh, 2020, A review on metallic micro lattice, Mater. Today Proc., 33, 1695, 10.1016/j.matpr.2020.07.375 Wu, 2019, Mechanical design and multifunctional applications of chiral mechanical metamaterials: a review, Mater. Des., 180, 10.1016/j.matdes.2019.107950 Barchiesi, 2019, Mechanical metamaterials: a state of the art, Math. Mech. Solids, 24, 212, 10.1177/1081286517735695 Kelkar, 2020, Cellular auxetic structures for mechanical metamaterials: a review, Sensors (Switz.), 20, 1 Liu, 2020, Theoretical analysis on the elasticity of a novel accordion cellular honeycomb core with in-plane curved beams, J. Sandw. Struct. Mater., 22, 702, 10.1177/1099636218768174 Lei, 2019, 3D printing of auxetic metamaterials with digitally reprogrammable shape, ACS Appl. Mater. Interfaces, 11, 10.1021/acsami.9b06081 Dirrenberger, 2013, Effective elastic properties of auxetic microstructures: anisotropy and structural applications, Int. J. Mech. Mater. Des., 9, 21, 10.1007/s10999-012-9192-8 Meena, 2019, A new auxetic structure with significantly reduced stress concentration effects, Mater. Des., 173, 10.1016/j.matdes.2019.107779 Chen, 2017, Lattice metamaterials with mechanically tunable Poisson's ratio for vibration control, Phys. Rev. Appl., 7, 10.1103/PhysRevApplied.7.024012 Zhang, 2019, Energy dissipation in functionally two-dimensional phase transforming cellular materials, Sci. Rep., 9, 1 Liu, 2021, Tensile and shear properties of star-shaped cellular lattice structure, Mech. Adv. Mat. Struct., 28, 2605, 10.1080/15376494.2020.1747669 Wang, 2018, Optimal form and size characterization of planar isotropic petal-shaped auxetics with tunable effective properties using IGA, Compos. Struct., 201, 486, 10.1016/j.compstruct.2018.06.042 Choi, 2018, Isogeometric configuration design optimization of shape memory polymer curved beam structures for extremal negative Poisson's ratio, Struct. Multidiscip. Optim., 58, 1861, 10.1007/s00158-018-2088-y Álvarez-Trejo, 2021, Bézier-based metamaterials: synthesis, mechanics and additive manufacturing, Mater. Des., 199, 10.1016/j.matdes.2020.109412 Cao, 2020, Numerical analysis of the mechanical behavior and energy absorption of a novel P-lattice, Thin-Walled Struct., 157, 10.1016/j.tws.2020.107147 Bru, 2019, Bioinspired structures for core sandwich composites produced by fused deposition modelling, Proc. Inst. Mech. Eng., Part L, J. Mater., Des. Appl., 234 Zhang, 2018, Soft mechanical metamaterials with unusual swelling behavior and tunable stress-strain curves, Sci. Adv., 4, 1, 10.1126/sciadv.aar8535 Alomarah, 2018, An investigation of in-plane tensile properties of re-entrant chiral auxetic structure, Int. J. Adv. Manuf. Technol., 96, 2013, 10.1007/s00170-018-1605-x Lu, 2020, Auxeticity of monoclinic tetrachiral honeycombs, Compos. Struct., 241, 10.1016/j.compstruct.2020.112067 Zhu, 2019, Hierarchical hexachiral auxetics for large elasto-plastic deformation, ACS Appl. Mater. Interfaces, 6 Wang, 2020, Design of 3D printed programmable horseshoe lattice structures based on a phase-evolution model, ACS Appl. Mater. Interfaces, 12 Zhu, 2018, Auxetic hexachiral structures with wavy ligaments for large elasto-plastic deformation, Smart Mater. Struct., 27, 10.1088/1361-665X/aab33d Kucewicz, 2018, Modelling, and characterization of 3D printed cellular structures, Mater. Des., 142, 177, 10.1016/j.matdes.2018.01.028 McCaw, 2018, Curved-Layered Additive Manufacturing of non-planar, parametric lattice structures, Mater. Des., 160, 949, 10.1016/j.matdes.2018.10.024 Yang, 2018, Out-of-plane crashworthiness analysis of bio-inspired aluminum honeycomb patterned with horseshoe mesostructure, Thin-Walled Struct., 125, 1, 10.1016/j.tws.2018.01.014 Liu, 2019, In-plane mechanics of a novel cellular structure for multiple morphing applications, Compos. Struct., 207, 598, 10.1016/j.compstruct.2018.08.096 Liu, 2021, The in-plane tensile and shear properties of novel chiral cellular structures, Mech. Adv. Mat. Struct., 10.1080/15376494.2020.1747669 Kabir, 2020, Characterization of 3D printed auxetic sinusoidal patterns/nylon composite fabrics, Fiber Polym., 21, 1372, 10.1007/s12221-020-9507-6 Kucewicz, 2019, Modelling and testing of 3D printed cellular structures under quasi-static and dynamic conditions, Thin-Walled Struct., 145, 10.1016/j.tws.2019.106385 Chen, 2021, Advances in mechanics of hierarchical composite materials, Compos. Sci. Technol., 214, 10.1016/j.compscitech.2021.108970 Che, 2017, Three-dimensional-printed multistable mechanical metamaterials with a deterministic deformation sequence, J. Appl. Mech., Trans. ASME, 84, 1, 10.1115/1.4034706 Yang, 2020, 1D to 3D multi-stable architected materials with zero Poisson's ratio and controllable thermal expansion, Mater. Des., 188, 1, 10.1016/j.matdes.2019.108430 Wang, 2019, Systematic design of tetra-petals auxetic structures with stiffness constraint, Mater. Des., 170, 10.1016/j.matdes.2019.107669 Wang, 2020, Data-driven structural design optimization for petal-shaped auxetics using isogeometric analysis, Comput. Model. Eng. Sci., 122, 433 Geng, 2019, Mechanical properties of selective laser sintering (SLS) additive manufactured chiral auxetic cylindrical stent, Exp. Mech., 59, 913, 10.1007/s11340-019-00489-0 Ebrahimi, 2018, 3D cellular metamaterials with planar anti-chiral topology, Mater. Des., 145, 226, 10.1016/j.matdes.2018.02.052 Farin, 1990 Ambekar, 2021, Topologically engineered 3D printed architectures with superior mechanical strength, Mater. Today, 48, 10.1016/j.mattod.2021.03.014 Schwarz, 1890 Neovius, 1883 Schoen, 1970 Chen, 2019, On hybrid cellular materials based on triply periodic minimal surfaces with extreme mechanical properties, Mater. Des., 183, 10.1016/j.matdes.2019.108109 Feng, 2019, Sandwich panel design and performance optimization based on triply periodic minimal surfaces, Comput. Aided Des., 115, 307, 10.1016/j.cad.2019.06.007 Ge, 2020, Microstructural features and compressive properties of SLM Ti6Al4V lattice structures, Surf. Coat. Technol., 403, 10.1016/j.surfcoat.2020.126419 Guo, 2019, Mechanical behavior of TPMS-based scaffolds: a comparison between minimal surfaces and their lattice structures, SN Appl. Sci., 1, 1, 10.1007/s42452-019-1167-z Higuera, 2021, Mechanical properties and energy–absorption capabilities of thermoplastic sheet gyroid structures, Mech. Adv. Mat. Struct., 1 Li, 2018, Optimal design and modeling of gyroid-based functionally graded cellular structures for additive manufacturing, Comput. Aided Des., 104, 87, 10.1016/j.cad.2018.06.003 Li, 2019, Comparison of mechanical properties and energy absorption of sheet-based and strut-based gyroid cellular structures with graded densities, Materials, 12, 2183, 10.3390/ma12132183 Liu, 2018, Functionally graded porous scaffolds in multiple patterns: new design method, physical and mechanical properties, Mater. Des., 160, 849, 10.1016/j.matdes.2018.09.053 Maconachie, 2020, The compressive behaviour of ABS gyroid lattice structures manufactured by fused deposition modelling, Int. J. Adv. Manuf. Technol., 107, 4449, 10.1007/s00170-020-05239-4 Miralbes, 2021, Comparative analysis of mechanical properties and energy absorption capabilities of functionally graded and non-graded thermoplastic sheet gyroid structures, Mech. Adv. Mat. Struct., 1 Peng, 2021, Elastic response of anisotropic Gyroid cellular structures under compression: parametric analysis, Mater. Des., 205, 10.1016/j.matdes.2021.109706 Rahmani, 2019, Mechanical behavior of Ti6Al4V scaffolds filled with CaSiO3 for implant applications, Appl. Sci. (Switz.), 9 Yang, 2019, Continuous graded Gyroid cellular structures fabricated by selective laser melting: design, manufacturing and mechanical properties, Mater. Des., 162, 394, 10.1016/j.matdes.2018.12.007 Yang, 2021, Fatigue properties of Ti-6Al-4V Gyroid graded lattice structures fabricated by laser powder bed fusion with lateral loading, Addit. Manuf., 46 Yin, 2020, Crushing behavior and optimization of sheet-based 3D periodic cellular structures, Composites, Part B, Eng., 182, 10.1016/j.compositesb.2019.107565 Yu, 2019, Investigation of functionally graded TPMS structures fabricated by additive manufacturing, Mater. Des., 182, 10.1016/j.matdes.2019.108021 Zhang, 2018, Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading, Addit. Manuf., 23, 505 Ma, 2020, Lattice structures of Cu-Cr-Zr copper alloy by selective laser melting: microstructures, mechanical properties and energy absorption, Mater. Des., 187, 10.1016/j.matdes.2019.108406 Spear, 2021, Investigation and statistical modeling of the mechanical properties of additively manufactured lattices, Materials, 14, 3962, 10.3390/ma14143962 Yang, 2020, Insights into unit cell size effect on mechanical responses and energy absorption capability of titanium graded porous structures manufactured by laser powder bed fusion, J. Mech. Behav. Biomed. Mater., 109, 10.1016/j.jmbbm.2020.103843 Zhang, 2020, Pseudo-ductile fracture of 3D printed alumina triply periodic minimal surface structures, J. Eur. Ceram. Soc., 40, 408, 10.1016/j.jeurceramsoc.2019.09.048 Ma, 2021, Elastically-isotropic open-cell minimal surface shell lattices with superior stiffness via variable thickness design, Addit. Manuf., 47 Zhang, 2020, Optimizing the pinch-off problem for gradient triply periodic minimal surface cellular structures manufactured by selective laser melting, Rapid Prototyping J., 26, 1771, 10.1108/RPJ-11-2019-0298 Zhang, 2021, Mechanical performance of 3D printed interpenetrating phase composites with spinodal topologies, Compos. Struct., 263, 10.1016/j.compstruct.2021.113693 Abueidda, 2020, Compression and buckling of microarchitectured Neovius-lattice, Extrem. Mech. Lett., 37, 10.1016/j.eml.2020.100688 Al-Ketan, 2018, The effect of architecture on the mechanical properties of cellular structures based on the IWP minimal surface, J. Mater. Res., 33, 343, 10.1557/jmr.2018.1 Ma, 2021, Mechanical and energy absorption properties of functionally graded lattice structures based on minimal curved surfaces, Int. J. Adv. Manuf. Technol. Hsieh, 2020, Minisurf – a minimal surface generator for finite element modeling and additive manufacturing, Softw. Impacts, 6 Lu, 2019, The anisotropic elastic behavior of the widely-used triply-periodic minimal surface based scaffolds, J. Mech. Behav. Biomed. Mater., 99, 56, 10.1016/j.jmbbm.2019.07.012 Al-Ketan, 2020, MSLattice: a free software for generating uniform and graded lattices based on triply periodic minimal surfaces, Mater. Des. Process. Commun., 1 Li, 2020, Bioinspired heat exchangers based on triply periodic minimal surfaces for supercritical CO2 cycles, Appl. Therm. Eng., 179, 10.1016/j.applthermaleng.2020.115686 Günther, 2022, Design procedure for triply periodic minimal surface based biomimetic scaffolds, J. Mech. Behav. Biomed. Mater., 126, 10.1016/j.jmbbm.2021.104871 Al-Ketan, 2020, Functionally graded and multi-morphology sheet TPMS lattices: design, manufacturing, and mechanical properties, J. Mech. Behav. Biomed. Mater., 102, 10.1016/j.jmbbm.2019.103520 Da, 2018, Topology optimization of periodic lattice structures taking into account strain gradient, Comput. Struct., 210, 28, 10.1016/j.compstruc.2018.09.003 Krishnan, 2022, Effective stiffness, strength, buckling and anisotropy of foams based on nine unique triple periodic minimal surfaces, Int. J. Solids Struct., 238, 10.1016/j.ijsolstr.2021.111418 Chatzigeorgiou, 2022, Numerical investigation of the effective mechanical properties and local stress distributions of TPMS-based and strut-based lattices for biomedical applications, J. Mech. Behav. Biomed. Mater., 126, 10.1016/j.jmbbm.2021.105025 Moerman, 2018, Gibbon: the geometry and image-based bioengineering add-on, J. Open Sour. Softw., 3, 506, 10.21105/joss.00506 Zhao, 2018, Improved mechanical properties and energy absorption of BCC lattice structures with triply periodic minimal surfaces fabricated by SLM, Materials, 11, 10.3390/ma11122411 Nazir, 2021, Investigation of compression and buckling properties of a novel surface-based lattice structure manufactured using multi jet fusion technology, Materials, 14 García-Ávila, 2022, Novel porous structures with non-cubic symmetry: synthesis, elastic anisotropy, and fatigue life behavior, Math. Mech. Solids, 28, 943, 10.1177/10812865221104236 Benedetti, 2021, Architected cellular materials: a review on their mechanical properties towards fatigue-tolerant design and fabrication, Mater. Sci. Eng., R Rep., 144, 10.1016/j.mser.2021.100606 Holmes, 2022, Mechanical behaviour of flexible 3D printed gyroid structures as a tuneable replacement for soft padding foam, Addit. Manuf., 50 Cuan-Urquizo, 2019, Characterization of the mechanical properties of FFF structures and materials: a review on the experimental, computational and theoretical approaches, Materials, 16 Gibson, 2015 Bourell, 2017, Materials for additive manufacturing, CIRP Ann., Manuf. Technol., 66, 659, 10.1016/j.cirp.2017.05.009 Patel, 2017, Highly stretchable and UV curable elastomers for digital light processing based 3D printing, Adv. Mater., 29, 10.1002/adma.201606000 Fu, 2022, Engineering 3D-architected gyroid MXene scaffolds for ultrasensitive micromechanical sensing, Adv. Eng. Mater., 10.1002/adem.202101388 Cotabarren, 2019, An assessment of the dimensional accuracy and geometry-resolution limit of desktop stereolithography using response surface methodology, Rapid Prototyping J., 25, 1169, 10.1108/RPJ-03-2019-0060 Park, 2019, Mechanical and thermal properties of 3d-printed thermosets by stereolithography, J. Photopolym. Sci. Technol., 32, 227, 10.2494/photopolymer.32.227 Yang, 2019, Mechanical property modeling of photosensitive liquid resin in stereolithography additive manufacturing: bridging degree of cure with tensile strength and hardness, Mater. Des., 162, 418, 10.1016/j.matdes.2018.12.009 Watters, 2018, Curing parameters to improve the mechanical properties of stereolithographic printed specimens, Rapid Prototyping J., 24, 46, 10.1108/RPJ-11-2016-0180 Keshavarzan, 2020, Investigation on the failure mechanism of triply periodic minimal surface cellular structures fabricated by Vat photopolymerization additive manufacturing under compressive loadings, Mech. Mater., 140, 10.1016/j.mechmat.2019.103150 Alabort, 2019, Design of metallic bone by additive manufacturing, Scr. Mater., 164, 110, 10.1016/j.scriptamat.2019.01.022 Yang, 2019, Compression–compression fatigue behaviour of Gyroid-type triply periodic minimal surface porous structures fabricated by selective laser melting, Acta Mater., 181, 49, 10.1016/j.actamat.2019.09.042 Zhang, 2022, Mechanical responses of sheet-based Gyroid-type triply periodic minimal surface lattice structures fabricated using selective laser melting, Mater. Des., 214, 10.1016/j.matdes.2022.110407 Kranz, 2015, Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4, J. Laser Appl., 27, 10.2351/1.4885235 Yang, 2017 Dallago, 2019, Geometric assessment of lattice materials built via Selective Laser Melting, Mater. Today Proc., 7, 353, 10.1016/j.matpr.2018.11.096 Daynes, 2021, Fracture toughness characteristics of additively manufactured Ti–6Al–4V lattices, Eur. J. Mech. A, Solids, 86, 10.1016/j.euromechsol.2020.104170 Yang, 2018, Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting, Int. J. Mech. Sci., 148, 149, 10.1016/j.ijmecsci.2018.08.039 Yang, 2019, Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: a numerical study, Mater. Des., 184, 10.1016/j.matdes.2019.108165 Yang, 2019, Investigation on the orientation dependence of elastic response in Gyroid cellular structures, J. Mech. Behav. Biomed. Mater., 90, 73, 10.1016/j.jmbbm.2018.09.042 Zhang, 2022, Machine learning guided prediction of mechanical properties of TPMS structures based on finite element simulation for biomedical titanium, Mater. Technol., 37, 1 Yánez, 2018, Gyroid porous titanium structures: a versatile solution to be used as scaffolds in bone defect reconstruction, Mater. Des., 140, 21, 10.1016/j.matdes.2017.11.050 Torres-Sanchez, 2022, Comparison of selective laser melted commercially pure titanium sheet-based triply periodic minimal surfaces and trabecular-like strut-based scaffolds for tissue engineering, Adv. Eng. Mater., 24, 10.1002/adem.202270002 Guo, 2022, Enhancement in the mechanical behaviour of a Schwarz Primitive periodic minimal surface lattice structure design, Int. J. Mech. Sci., 216, 10.1016/j.ijmecsci.2021.106977 Yang, 2020, An investigation into the effect of gradients on the manufacturing fidelity of triply periodic minimal surface structures with graded density fabricated by selective laser melting, J. Mater. Process. Technol., 275, 10.1016/j.jmatprotec.2019.116367 Zhao, 2022, Design and properties of graded polyamide12/hydroxyapatite scaffolds based on primitive lattices using selective laser sintering, J. Mech. Behav. Biomed. Mater., 126, 10.1016/j.jmbbm.2021.105052 Hailu, 2022, Investigation of torsional properties of surface- and strut-based lattice structures manufactured using multiJet fusion technology, Int. J. Adv. Manuf. Technol., 1 Ongaro, 2018, Estimation of the effective properties of two-dimensional cellular materials: a review, Theor. Appl. Mech. Lett., 8, 209, 10.1016/j.taml.2018.04.010 Hedayati, 2017, Analytical relationships for the mechanical properties of additively manufactured porous biomaterials based on octahedral unit cells, Appl. Math. Model., 46, 408, 10.1016/j.apm.2017.01.076 Chen, 2021, Vibration and damping performance of carbon fiber-reinforced polymer 3D double-arrow-head auxetic metamaterials, J. Mater. Sci., 56, 1443, 10.1007/s10853-020-05366-z Ma, 2018, Modal characteristics and damping enhancement of carbon fiber composite auxetic double-arrow corrugated sandwich panels, Compos. Struct., 203, 539, 10.1016/j.compstruct.2018.07.006 Bonfanti, 2020, Structural analysis of cyclically periodic rings and its application to the mechanics of balloon expandable stents, Int. J. Solids Struct., 185–186, 46, 10.1016/j.ijsolstr.2019.04.005 Chuang, 2003, Theoretical expressions for describing the stiffness and strength of regular hexagonal honeycombs with Plateau borders, Mater. Des., 24, 263, 10.1016/S0261-3069(03)00036-0 Chuang, 2002, Elastic moduli and plastic collapse strength of hexagonal honeycombs with plateau borders, Int. J. Mech. Sci., 44, 1827, 10.1016/S0020-7403(02)00139-X Chuang, 2002, Effects of solid distribution on the elastic buckling of honeycombs, Int. J. Mech. Sci., 44, 1429, 10.1016/S0020-7403(02)00039-5 Liu, 2022, Equivalent in-plane dynamic elastic moduli of lattice structures with Plateau borders, Compos. Struct., 299, 10.1016/j.compstruct.2022.116056 Gad, 2021, A strain energy-based homogenization method for 2-D and 3-D cellular materials using the micropolar elasticity theory, Compos. Struct., 265, 10.1016/j.compstruct.2021.113594 Ma, 2016, A nonlinear mechanics model of bio-inspired hierarchical lattice materials consisting of horseshoe microstructures, J. Mech. Phys. Solids, 90, 179, 10.1016/j.jmps.2016.02.012 Dong, 2022, Modeling and design of periodic polygonal lattices constructed from microstructures with varying curvatures, Phys. Rev. Appl., 17, 10.1103/PhysRevApplied.17.044032 Wang, 2023, 3D printed fractal metamaterials with tunable mechanical properties and shape reconfiguration, Adv. Funct. Mater., 33 Dong, 2023, Modeling and design of three-dimensional voxel printed lattice metamaterials, Addit. Manuf., 69, 2214 Yan, 2020, Soft three-dimensional network materials with rational bio-mimetic designs, Nat. Commun., 11, 10.1038/s41467-020-14996-5 Chang, 2022, Mechanics of three-dimensional soft network materials with a class of bio-inspired designs, J. Appl. Mech., Trans. ASME, 89, 10.1115/1.4054458 Hussein, 2015, Modeling and stress analysis of a pre-shaped curved beam: influence of high modes of buckling, Int. J. Appl. Mech., 7, 10.1142/S1758825115500556 Silva, 1997, The effects of non-periodic microstructure and defects on the compressive strength of two-dimensional cellular solids, Int. J. Mech. Sci., 39, 549, 10.1016/S0020-7403(96)00065-3 Cai, 2022, On the effective elastic modulus of the ribbed structure based on Schwarz Primitive triply periodic minimal surface, Thin-Walled Struct., 170, 10.1016/j.tws.2021.108642 Zadpoor, 2019, Mechanical performance of additively manufactured meta-biomaterials, Acta Biomater., 85, 41, 10.1016/j.actbio.2018.12.038 Choi, 2019, Isogeometric configuration design sensitivity analysis of geometrically exact shear-deformable beam structures, Comput. Methods Appl. Mech. Eng., 351, 153, 10.1016/j.cma.2019.03.032 Qureshi, 2022, On the effect of porosity and functional grading of 3D printable triply periodic minimal surface (TPMS) based architected lattices embedded with a phase change material, Int. J. Heat Mass Transf., 183, 10.1016/j.ijheatmasstransfer.2021.122111 Deng, 2022, Inverse design of mechanical metamaterials with target nonlinear response via a neural accelerated evolution strategy, Adv. Mater., 34 Dong, 2022, Optimal design of three-dimensional voxel printed multimaterial lattice metamaterials via machine learning and evolutionary algorithm, Phys. Rev. Appl., 18, 1, 10.1103/PhysRevApplied.18.054050 Xiao, 2018, Additively-manufactured functionally graded ti-6Al-4V lattice structures with high strength under static and dynamic loading: experiments, Int. J. Impact Eng., 111, 255, 10.1016/j.ijimpeng.2017.09.018 Agnelli, 2019, Design and testing of 3D-printed micro-architectured polymer materials exhibiting a negative Poisson's ratio, Contin. Mech. Thermodyn., 32, 433, 10.1007/s00161-019-00851-6 Al-Ketan, 2018, Microarchitected stretching-dominated mechanical metamaterials with minimal surface topologies, Adv. Eng. Mater., 20, 10.1002/adem.201800029 Hashin, 1963, A variational approach to the theory of the elastic behaviour of multiphase materials, J. Mech. Phys. Solids, 11, 127, 10.1016/0022-5096(63)90060-7 Khaderi, 2014, The stiffness and strength of the gyroid lattice, Int. J. Solids Struct., 51, 3866, 10.1016/j.ijsolstr.2014.06.024 Fleck, 2004, An overview of the mechanical properties of foams and periodic lattice materials, 1 Ahmadi, 2014, Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells, J. Mech. Behav. Biomed. Mater., 34, 106, 10.1016/j.jmbbm.2014.02.003 Evsevleev, 2021, X-ray computed tomography procedures to quantitatively characterize the morphological features of triply periodic minimal surface structures, Materials, 14, 10.3390/ma14113002 Li, 2006, Compressive strain at the onset of densification of cellular solids, J. Cell. Plast., 42, 371, 10.1177/0021955X06063519 Al-Ketan, 2018, Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials, Addit. Manuf., 19, 167