Mechanical characterization of structural lightweight aggregate concrete made with sintered fly ash aggregates and synthetic fibres

Nadesan, 2017, Structural concrete using sintered flyash lightweight aggregate: a review, Construct. Build. Mater., 154, 928, 10.1016/j.conbuildmat.2017.08.005 2018 Wegen, 1985, Properties of concrete made with three types of artificial PFA coarse aggregates, Int. J. Cem. Compos. Lightweight Concr., 7, 159, 10.1016/0262-5075(85)90003-X Zhang, 1991, Characteristics of lightweight aggregates for high strength concrete, ACI Mater. J., 88, 150 Galpern, 1990, Porous aggregates from beneficiated thermal power plant ash (USSR), EnergStroit, 2, 38 Campione, 2005, Steel-concrete bond in lightweight reinforced concrete under monotonic and cyclic actions, Eng. Struct., 27, 881, 10.1016/j.engstruct.2005.01.010 Duzgun, 2005, Effect of steel fibres on the mechanical properties of natural lightweight aggregate concrete, Mater. Lett., 59, 3357, 10.1016/j.matlet.2005.05.071 Gomathi, 2015, An accelerated curing effects on the mechanical performance of cold bonded and sintered fly ash aggregate concrete, Construct. Build. Mater., 77, 276, 10.1016/j.conbuildmat.2014.12.108 Rossignolo, 2003, Properties of high-performance LWAC for precast structures with Brazilian lightweight aggregates, Cement Concr. Compos., 25, 77, 10.1016/S0958-9465(01)00046-4 Al-Azzawi, 2018, Behavior of reinforced aggregate concrete hollowcore slabs, Comput. Concr., 21, 117 Raithby, 1991, Lightweight concrete in highway bridges, Int. J. Cem. Compos. Lightweight Concr., 2, 133 Thomas, 2012, Performance of lightweight aggregate concrete containing slag after 25 years in a harsh marine environment, Cement Concr. Res., 42, 358, 10.1016/j.cemconres.2011.10.009 Kockal, 2010, Effects of lightweight fly ash aggregate properties on the behaviour of lightweight concretes, J. Hazard Mater., 179, 954, 10.1016/j.jhazmat.2010.03.098 Satpathy, 2019, Development of sustainable lightweight concrete using fly ash cenosphere and sintered fly ash aggregate, Construct. Build. Mater., 202, 636, 10.1016/j.conbuildmat.2019.01.034 Kayali, 2008, Fly ash lightweight aggregates in high-performance concrete, Construct. Build. Mater., 22, 2393, 10.1016/j.conbuildmat.2007.09.001 Guneyisi, 2013, Durability aspect of concretes composed of cold bonded and sintered fly ash lightweight aggregates, Composer B, 53, 258, 10.1016/j.compositesb.2013.04.070 Rasheed, 2015, Mechanical behavior of sustainable hybrid-synthetic fibre reinforced cellular light weight concrete for structural applications of masonry, Construct. Build. Mater., 98, 631, 10.1016/j.conbuildmat.2015.08.137 Deng, 2007, Mechanical behaviors of concrete combined with steel and synthetic macro-fibres, Comput. Concr., 4, 207, 10.12989/cac.2007.4.3.207 Alhozaimy, 1996, Mechanical properties of polypropylene fiber reinforced concrete and the effects of pozzolanic materials, Cement Concr. Compos., 9465, 85, 10.1016/0958-9465(95)00003-8 Brandt, 2008, Fibre-reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering, Compos. Struct., 86, 3, 10.1016/j.compstruct.2008.03.006 Enfedaque, 2019, Influence of fiber distribution and orientation in the fracture behavior of polyolefin fiber-reinforced concrete, Materials, 12, 220, 10.3390/ma12020220 Buratti, 2011, Post-cracking behavior of steel and macro synthetic fibre-reinforced concretes, Construct. Build. Mater., 25, 2713, 10.1016/j.conbuildmat.2010.12.022 Rasheed, 2018, Experimental study on compression behavior of fiber reinforced cellular concrete stack bonded masonry prisms, ACI Mater. J., 115, 149 Rasheed, 2018, “Behavior of hybrid-synthetic fiber reinforced cellular lightweight concrete under uniaxial tension – experimental and analytical studies, Construct. Build. Mater., 162, 857, 10.1016/j.conbuildmat.2017.12.095 Mindess, 1998, Impact resistance of polyolefin fibre reinforced precast units, Cement Concr. Compos., 20, 387, 10.1016/S0958-9465(98)00016-X Ibrahim, 2014, Compressive and flexural strength of foamed concrete containing polyolefin fibres, Adv. Mater. Res., 91, 489, 10.4028/www.scientific.net/AMR.911.489 Maruthachalam, 2013, Influence of polyolefin macro-monofilament fibre on mechanical properties of high-performance concrete, KSCE J. Civ. Eng., 17, 1682, 10.1007/s12205-013-0399-5 Rasheed, 2016, Effect of Synthetic Fiber Reinforcement on Compression and Tension Behavior of Lightweight Cellular Concrete IS 12269, 1987 IS 4031, 1999 ASTM C 330, 2014 2000 MacGregor, 1997 Kazmi, 2019, Axial stress-strain behaviour of micro synthetic fiber reinforced recycled aggregate concrete, Cement Concr. Compos., 97, 341, 10.1016/j.cemconcomp.2019.01.005 P Collins, 1997 ACI- 318-05, 2004, vol. 2003 fib, 2010, Model. “First complete draft, Bulletin, 55 2011, Eurocode 2:part-1, eurocode 2: design of concrete structures - Part 1-1, General Rules and Rules for Build, 54 Rocco, 1999, Size effect and boundary conditions in the Brazilian test: experimental verification, Mater. Struct., 32, 210, 10.1007/BF02481517 Timoshenko SP, 1991 Bhowmik, 2019, An experimental approach for characterization of fracture process zone in concrete, Eng. Fract. Mech., 211, 401, 10.1016/j.engfracmech.2019.02.026 Wu, 2011, An experimental investigation on the FPZ properties in concrete using digital image correlation technique, Eng. Fract. Mech., 78, 2978, 10.1016/j.engfracmech.2011.08.016 Srikar, 2016, A study on residual compression behavior of structural fiber reinforced concrete exposed to moderate temperature using digital image correlation, Int. J. Concr. Struct. Mater., 10, 75, 10.1007/s40069-016-0127-x Sutton, 2009 Rouchier, 2013, Damage monitoring in fibre reinforced mortar by combined digital image correlation and acoustic emission, Construct. Build. Mater., 38, 371, 10.1016/j.conbuildmat.2012.07.106 Koz, 2015, Fracture energy of foamed concrete based on three-point bending test on notched beams, Procedia Eng., 108, 349, 10.1016/j.proeng.2015.06.157 Trunk, 1999, Fracture mechanics parameters of autoclaved aerated concrete, Cement Concr. Res., 29, 855, 10.1016/S0008-8846(99)00059-9 2005, “Test method for metallic fibred concrete — measuring the flexural tensile strength (limit of proportionality (LOP), residual), Br. Stand. Inst., 3, 1 2003, vol. 2, 1 Vandewalle, 2003, 162- TDF: test and design methods for steel fibre reinforced concrete- sigma- epsilon- design method- Final Recommendation, Mater. Struct., 36, 560, 10.1617/14007 Alberti, 2015, Improving the reinforcement of pf polyolefin fiber reinforced concrete for infrastructure applications, Fibers, 3, 504, 10.3390/fib3040504 1997