Mechanical and thermal properties of carbon fiber/polypropylene composite filled with nano-clay

Shen, 2009, The effects of carbon nanotubes on mechanical and thermal properties of woven glass fibre reinforced polyamide-6 nanocomposites, Compos Sci Technol, 69, 239, 10.1016/j.compscitech.2008.10.017 Diaz, 2003, Development to manufacture structural aeronautical parts in carbon fibre reinforced thermoplastic materials, J Mater Process Technol, 143–144, 342, 10.1016/S0924-0136(03)00450-3 Parlevliet, 2006, Residual stresses in thermoplastic composites – a study of the literature – Part I: Formation of residual stresses, Compos A Appl Sci Manuf, 37, 1847, 10.1016/j.compositesa.2005.12.025 Jeencham, 2014, Effect of flame retardants on flame retardant, mechanical, and thermal properties of sisal fiber/polypropylene composites, Composites Part B, 56, 249, 10.1016/j.compositesb.2013.08.012 Phong, 2013, Improved fracture toughness and fatigue life of carbon fiber reinforced epoxy composite due to incorporation of rubber nanoparticles, J Mater Sci, 48, 6039, 10.1007/s10853-013-7400-z Phong, 2013, Enhancement of mechanical properties of carbon fabric/epoxy composites using micro/nano-sized bamboo fibrils, Mater Des, 47, 624, 10.1016/j.matdes.2012.12.057 Gardea, 2014, Characterization of electrical and thermal properties of carbon nanotube/epoxy composites, Composites Part B, 56, 611, 10.1016/j.compositesb.2013.08.032 Shiu, 2014, Characterizing thermal and mechanical properties of graphene/epoxy nanocomposites, Composites Part B, 56, 691, 10.1016/j.compositesb.2013.09.007 Phong, 2013, Improvement in the mechanical performances of carbon fiber/epoxy composite with addition of nano-(polyvinyl alcohol) fibers, Compos Struct, 99, 380, 10.1016/j.compstruct.2012.12.018 Gabr, 2013, Mechanical, thermal, and moisture absorption properties of nano-clay reinforced nano-cellulose biocomposites, Cellulose, 20, 819, 10.1007/s10570-013-9876-8 Gabr, 2010, Effect of microfibrillated cellulose on mechanical properties of plain woven CFRP reinforced epoxy, Compos Struct, 92, 1999, 10.1016/j.compstruct.2009.12.009 Jiang, 2014, Mechanical, electrical and thermal properties of aligned carbon nanotube/polyimide composites, Composites Part B, 56, 408, 10.1016/j.compositesb.2013.08.064 GABR, 2010, Interfacial adhesion improvement of plain woven carbon fibre reinforced epoxy filled with micro-fibrillated cellulose by addition liquid rubber, J Mater Sci, 45, 3841, 10.1007/s10853-010-4439-y Barakat, 2009, Influence of cobalt nanoparticles’ incorporation on the magnetic properties of the nickel nanofibers: cobalt-doped nickel nanofibers prepared by electrospinning, J Phys Chem C, 113, 19452, 10.1021/jp905667s Mohamed, 2014, Thermal and mechanical properties of electrospun nano-cellulose reinforced epoxy nanocomposites, Polym Testing, 37, 51, 10.1016/j.polymertesting.2014.04.010 Takagi, 2013, Extraction of cellulose nanofiber from waste papers and application to reinforcement in biodegradable composites, J Reinf Plast Compos, 32, 1542, 10.1177/0731684413494109 GABR, 2010, A study on mechanical properties of bacterial cellulose/epoxy reinforced by plain woven carbon fiber modified with liquid rubber, J Compos A, 41, 1263, 10.1016/j.compositesa.2010.05.010 Chen, 2014, Nano-epoxy resins containing electrospun carbon nanofibers and the resulting hybrid multi-scale composites, Composites Part B, 58, 43, 10.1016/j.compositesb.2013.10.048 Nopphawan, 2011, Fabrication of CFRP from high performance clay/epoxy nanocomposite: preparation conditions, thermal–mechanical properties and interlaminar fracture characteristics, Composites Part A, 42, 881, 10.1016/j.compositesa.2011.02.014 Pandey, 2005, Green nanocomposites from renewable resources: effect of plasticizer on the structure and material properties of clay-filled starch, Starch, 57, 8, 10.1002/star.200400313 mingliang, 2009, Preparation and properties of polypropylene/clay nanocomposites using an organoclay modified through solid state method, J Reinf Plast Compos, 28, 5, 10.1177/0731684407079493 Ramsaroop, 2010, Fracture toughness studies of polypropylene–clay nanocomposites and glass fibre reinforced polypropylene composites, Mater Sci Appl, 1, 301 Suin, 2014, Mechanically improved and optically transparent polycarbonate/clay nanocomposites using phosphonium modified organoclay, Mater Des, 54, 553, 10.1016/j.matdes.2013.08.091 Shokrieh, 2012, Fabrication and mechanical properties of clay/epoxy nanocomposite and its polymer concrete, Mater Des, 40, 443, 10.1016/j.matdes.2012.03.008 Parija, 2004, Studies on physico-mechanical properties and thermal characteristics of polypropylene/layered silicate nanocomposites, Polym Compos, 25, 646, 10.1002/pc.20059 Lee, 2005, Properties of polyethylene-layered silicate nanocomposites prepared by melt intercalation with a PP-g-MA compatibilizer, Compos Sci Technol, 65, 1996, 10.1016/j.compscitech.2005.03.015 Harismendy, 1997, Strain rate and temperature effects on the mechanical behaviour of epoxy mixtures with different crosslink densities, Polymer, 38, 5573, 10.1016/S0032-3861(97)00121-3 Charlesworth, 1988, Effect of crosslink density on molecular relaxations in diepoxide–diamine network polymers. Part 2. The rubbery plateau region, Polym Eng Sci, 28, 230, 10.1002/pen.760280406 Wetzel, 2003, Epoxy nanocomposites with high mechanical and tribological performance, Compos Sci Technol, 63, 2055, 10.1016/S0266-3538(03)00115-5 Kim, 1991, High strength, high fracture toughness fibre composites with interface control—a review, Compos Sci Technol, 41, 333, 10.1016/0266-3538(91)90072-W Velmurugan, 2007, Improvements in mode I interlaminar fracture toughness and in-plane mechanical properties of stitched glass/polyester composites, Compos Sci Technol, 67, 61, 10.1016/j.compscitech.2006.03.032 Shah Khan, 1996, Fatigue behaviour of stitched GRP laminates, Compos Sci Technol, 56, 695, 10.1016/0266-3538(96)00052-8 Ray, 2002, Impact fatigue behaviour of vinylester resin matrix composites reinforced with alkali treated jute fibers, Compos A Appl Sci Manuf, 33, 233, 10.1016/S1359-835X(01)00096-3 Silva, 2006, Fracture toughness of natural fibers/castor oil polyurethane composites, Compos Sci Technol, 66, 1328, 10.1016/j.compscitech.2005.10.012 Becker, 2003, Use of layered silicates to supplementarily toughen high performance epoxy–carbon fiber composites, J Mater Sci Lett, 22, 1411, 10.1023/A:1025703212174