Mechanical and gamma-ray shielding properties and environmental benefits of concrete incorporating GGBFS and copper slag

Gartner, 2004, Industrially interesting approaches to “low-CO2” cements, Cement Concr. Res., 34, 1489, 10.1016/j.cemconres.2004.01.021

Zareei, 2019, Green high strength concrete containing recycled waste ceramic aggregates and waste carpet fibers: mechanical, durability, and microstructural properties, J. Build. Eng., 100914, 10.1016/j.jobe.2019.100914

Shoaei, 2017, Investigation of adding cement kiln dust (CKD) in ordinary and lightweight concrete, Adv. Concr. Constr., 5

Ameri, 2019, Optimum rice husk ash content and bacterial concentration in self-compacting concrete, Construct. Build. Mater., 222, 796, 10.1016/j.conbuildmat.2019.06.190

Rashad, 2016, Cementitious materials and agricultural wastes as natural fine aggregate replacement in conventional mortar and concrete, J. Build. Eng., 5, 119, 10.1016/j.jobe.2015.11.011

Muttashar, 2018, Self-compacting geopolymer concrete with spend garnet as sand replacement, J. Build. Eng., 15, 85, 10.1016/j.jobe.2017.10.007

Ameri, 2020, Steel fibre-reinforced high-strength concrete incorporating copper slag: mechanical, gamma-ray shielding, impact resistance, and microstructural characteristics, J. Build. Eng., 29, 101118, 10.1016/j.jobe.2019.101118

Zamanabadi, 2019, Ambient-cured alkali-activated slag paste incorporating micro-silica as repair material: effects of alkali activator solution on physical and mechanical properties, Construct. Build. Mater., 229, 116911, 10.1016/j.conbuildmat.2019.116911

Vishwakarma, 2018, Green concrete mix using solid waste and nanoparticles as alternatives–a review, Construct. Build. Mater., 162, 96, 10.1016/j.conbuildmat.2017.11.174

Özbay, 2016, Utilization and efficiency of ground granulated blast furnace slag on concrete properties–A review, Construct. Build. Mater., 105, 423, 10.1016/j.conbuildmat.2015.12.153

Sivasundaram, 1992, Properties of concrete incorporating low quantity of cement and high volumes of ground granulated slag, Mater. J., 89, 554

Güneyisi, 2008, A study on durability properties of high-performance concretes incorporating high replacement levels of slag, Mater. Struct., 41, 479, 10.1617/s11527-007-9260-y

Oner, 2007, An experimental study on optimum usage of GGBS for the compressive strength of concrete, Cement Concr. Compos., 29, 505, 10.1016/j.cemconcomp.2007.01.001

Gruyaert, 2012, Investigation of the influence of blast-furnace slag on the resistance of concrete against organic acid or sulphate attack by means of accelerated degradation tests, Cement Concr. Res., 42, 173, 10.1016/j.cemconres.2011.09.009

Turanli, 2005, Effect of large amounts of natural pozzolan addition on properties of blended cements, Cement Concr. Res., 35, 1106, 10.1016/j.cemconres.2004.07.022

Zareei, 2019, Performance of sustainable high strength concrete with basic oxygen steel-making (BOS) slag and nano-silica, J. Build. Eng., 100791, 10.1016/j.jobe.2019.100791

Behera, 2014, Recycled aggregate from C&D waste & its use in concrete–A breakthrough towards sustainability in construction sector: a review, Construct. Build. Mater., 68, 501, 10.1016/j.conbuildmat.2014.07.003

Zareei, 2019, Recycled ceramic waste high strength concrete containing wollastonite particles and micro-silica: a comprehensive experimental study, Construct. Build. Mater., 201, 11, 10.1016/j.conbuildmat.2018.12.161

Silva, 2014, Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production, Construct. Build. Mater., 65, 201, 10.1016/j.conbuildmat.2014.04.117

Bravo, 2012, Concrete made with used tyre aggregate: durability-related performance, J. Clean. Prod., 25, 42, 10.1016/j.jclepro.2011.11.066

Bogas, 2015, Mechanical characterization of concrete produced with recycled lightweight expanded clay aggregate concrete, J. Clean. Prod., 89, 187, 10.1016/j.jclepro.2014.11.015

Ameri, 2019, Geopolymers vs. alkali-activated materials (AAMs): a comparative study on durability, microstructure, and resistance to elevated temperatures of lightweight mortars, Construct. Build. Mater., 222, 49, 10.1016/j.conbuildmat.2019.06.079

Khalaf, 2019, The constituents, properties and application of heavyweight concrete: a review, Construct. Build. Mater., 215, 73, 10.1016/j.conbuildmat.2019.04.146

Chithra, 2016, The effect of Colloidal Nano-silica on workability, mechanical and durability properties of High Performance Concrete with Copper slag as partial fine aggregate, Construct. Build. Mater., 113, 794, 10.1016/j.conbuildmat.2016.03.119

Lori, 2019, Investigating the mechanical and hydraulic characteristics of pervious concrete containing copper slag as coarse aggregate, Construct. Build. Mater., 197, 130, 10.1016/j.conbuildmat.2018.11.230

Prem, 2018, Sustainable cleaner production of concrete with high volume copper slag, J. Clean. Prod., 193, 43, 10.1016/j.jclepro.2018.04.245

Rajasekar, 2019, Assessment of strength and durability characteristics of copper slag incorporated ultra high strength concrete, J. Clean. Prod., 208, 402, 10.1016/j.jclepro.2018.10.118

Gupta, 2019, Strength and micro-structural properties of self-compacting concrete incorporating copper slag, Construct. Build. Mater., 224, 894, 10.1016/j.conbuildmat.2019.07.105

Sharma, 2017, Sustainable use of copper slag in self compacting concrete containing supplementary cementitious materials, J. Clean. Prod., 151, 179, 10.1016/j.jclepro.2017.03.031

Vijayaraghavan, 2017, Effect of copper slag, iron slag and recycled concrete aggregate on the mechanical properties of concrete, Res. Pol., 53, 219, 10.1016/j.resourpol.2017.06.012

Ambily, 2015, Studies on ultra high performance concrete incorporating copper slag as fine aggregate, Construct. Build. Mater., 77, 233, 10.1016/j.conbuildmat.2014.12.092

Dos Anjos, 2017, Blasted copper slag as fine aggregate in Portland cement concrete, J. Environ. Manag., 196, 607, 10.1016/j.jenvman.2017.03.032

Demir, 2011, Determination of radiation attenuation coefficients of heavyweight-and normal-weight concretes containing colemanite and barite for 0.663 MeV γ-rays, Ann. Nucl. Energy, 38, 1274, 10.1016/j.anucene.2011.02.009

Bahrololoumi, 2019, Hydrolytic aging in rubber-like materials: a micro-mechanical approach to modeling

Bahrololoumi, 2020, A multi-physics constitutive model to predict quasi-static behaviour: hydrolytic aging in thin cross-linked polymers, Int. J. Plast., 102676, 10.1016/j.ijplas.2020.102676

Mohammadi, 2019, A micro-mechanical model for constitutive behavior of elastomers during thermo-oxidative aging, 542

Akkurt, 2013, The effect of barite proportion on neutron and gamma-ray shielding, Ann. Nucl. Energy, 51, 5, 10.1016/j.anucene.2012.08.026

Gökçe, 2018, Gamma-ray attenuation coefficients and transmission thickness of high consistency heavyweight concrete containing mineral admixture, Cement Concr. Compos., 92, 56, 10.1016/j.cemconcomp.2018.05.015

Esen, 2018, Investigation of usability of limonite aggregate in heavy-weight concrete production, Prog. Nucl. Energy, 105, 185, 10.1016/j.pnucene.2018.01.011

Esen, 2017, Evaluation of physical and mechanical characteristics of siderite concrete to be used as heavy-weight concrete, Cement Concr. Compos., 82, 117, 10.1016/j.cemconcomp.2017.05.009

Papachristoforou, 2018, Radiation shielding and mechanical properties of steel fiber reinforced concrete (SFRC) produced with EAF slag aggregates, Radiat. Phys. Chem., 149, 26, 10.1016/j.radphyschem.2018.03.010

ASTM C33/C33M-16, 2016

ASTM C494/C494M-17, 2017

Kırca, 2013, Compressive strength development of calcium aluminate cement–GGBFS blends, Cement Concr. Compos., 35, 163, 10.1016/j.cemconcomp.2012.08.016

Siddique, 2012, Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperatures, J. Adv. Res., 3, 45, 10.1016/j.jare.2011.03.004

Choi, 2017, Mercury intrusion porosimetry characterization of micropore structures of high-strength cement pastes incorporating high volume ground granulated blast-furnace slag, Construct. Build. Mater., 137, 96, 10.1016/j.conbuildmat.2017.01.076

ASTM C138/C138M-14, 2014, Standard test method for density (unit weight), yield, and air content (gravimetric) of concrete, ASTM International

ASTM C1437-15, 2015

ASTM C39/C39M-16, 2016, Standard test method for compressive strength of cylindrical concrete specimens, ASTM International

ASTM C496/C496M-17, 2017, Standard test method for splitting tensile strength of cylindrical concrete specimens, ASTM International

Ezziane, 2014, Evaluation of rheological parameters of mortar containing various amounts of mineral addition with polycarboxylate superplasticizer, Construct. Build. Mater., 70, 549, 10.1016/j.conbuildmat.2014.07.111

Boukendakdji, 2012, Effects of granulated blast furnace slag and superplasticizer type on the fresh properties and compressive strength of self-compacting concrete, Cement Concr. Compos., 34, 583, 10.1016/j.cemconcomp.2011.08.013

Park, 2005, Rheological properties of cementitious materials containing mineral admixtures, Cement Concr. Res., 35, 842, 10.1016/j.cemconres.2004.11.002

Ayano, 2000, Durability of concrete with copper slag fine aggregate, Spec. Publ., 192, 141

Mithun, 2016, Performance of alkali activated slag concrete mixes incorporating copper slag as fine aggregate, J. Clean. Prod., 112, 837, 10.1016/j.jclepro.2015.06.026

ACI Committee 213, 2003

Paris, 2016, A review of waste products utilized as supplements to Portland cement in concrete, J. Clean. Prod., 121, 1, 10.1016/j.jclepro.2016.02.013

Makhloufi, 2015, Effect of quaternary cementitious systems containing limestone, blast furnace slag and natural pozzolan on mechanical behavior of limestone mortars, Construct. Build. Mater., 95, 647, 10.1016/j.conbuildmat.2015.07.050

Boubekeur, 2019, Prediction of the durability performance of ternary cement containing limestone powder and ground granulated blast furnace slag, Construct. Build. Mater., 209, 215, 10.1016/j.conbuildmat.2019.03.120

Cheah, 2016, The engineering properties and microstructure development of cement mortar containing high volume of inter-grinded GGBS and PFA cured at ambient temperature, Construct. Build. Mater., 122, 683, 10.1016/j.conbuildmat.2016.06.105

Courard, 2014, Limestone fillers cement based composites: effects of blast furnace slags on fresh and hardened properties, Construct. Build. Mater., 51, 439, 10.1016/j.conbuildmat.2013.10.076

Dadsetan, 2017, Mechanical and microstructural properties of self-compacting concrete blended with metakaolin, ground granulated blast-furnace slag and fly ash, Construct. Build. Mater., 146, 658, 10.1016/j.conbuildmat.2017.04.158

Lye, 2015, Use of copper slag and washed copper slag as sand in concrete: a state-of-the-art review, Mag. Concr. Res., 67, 665, 10.1680/macr.14.00214

Al-Jabri, 2009, Copper slag as sand replacement for high performance concrete, Cement Concr. Compos., 31, 483, 10.1016/j.cemconcomp.2009.04.007

Al-Jabri, 2009, Performance of high strength concrete made with copper slag as a fine aggregate, Construct. Build. Mater., 23, 2132, 10.1016/j.conbuildmat.2008.12.013

Wu, 2010, Optimum content of copper slag as a fine aggregate in high strength concrete, Mater. Des., 31, 2878, 10.1016/j.matdes.2009.12.037

Bijen, 1996, Benefits of slag and fly ash, Construct. Build. Mater., 10, 309, 10.1016/0950-0618(95)00014-3

Gao, 2012, Splitting strength of GGBFS concrete incorporating with steel fiber and polypropylene fiber after exposure to elevated temperatures, Fire Saf. J., 54, 67, 10.1016/j.firesaf.2012.07.009

Shariq, 2010, Effect of GGBFS on time dependent compressive strength of concrete, Construct. Build. Mater., 24, 1469, 10.1016/j.conbuildmat.2010.01.007

Farhan, 2019, Investigation of engineering properties of normal and high strength fly ash based geopolymer and alkali-activated slag concrete compared to ordinary Portland cement concrete, Construct. Build. Mater., 196, 26, 10.1016/j.conbuildmat.2018.11.083

Elena, 2012, Application of X-ray diffraction (XRD) and scanning electron microscopy (SEM) methods to the portland cement hydration processes, J. Appl. Eng. Sci., 2, 35

Shoaei, 2020, Glass powder as a partial precursor in Portland cement and alkali-activated slag mortar: a comprehensive comparative study, Construct. Build. Mater., 251, 118991, 10.1016/j.conbuildmat.2020.118991

Aishwarya, 2017, The experimental study and behaviour OF concrete BY partial replacement OF cement with ggbs and fine aggregate with copper slag, Int. Res. J. Eng. Technol., 4, 2618

Nair, 2018, The effect of GGBFS and copper slag on strength of self compacting concrete: an experimental study, Int. J. Eng. Adv. Technol., 7, 47

Chethan, 2017, Experimental investigation ON copper slag as fine aggregate replacement and ggbs & red mud as cement replacement along with hybrid fibres, Int. Res. J. Eng. Technol., 4, 2016

Shams, 2018, Investigation of gamma radiation attenuation in heavy concrete shields containing hematite and barite aggregates in multi-layered and mixed forms, Construct. Build. Mater., 182, 35, 10.1016/j.conbuildmat.2018.06.032

Tufekci, 2018, Development of heavyweight high performance fiber reinforced cementitious composites (HPFRCC)–Part II: X-ray and gamma radiation shielding properties, Construct. Build. Mater., 163, 326, 10.1016/j.conbuildmat.2017.12.086

Akkurt, 2006, Radiation shielding of concretes containing different aggregates, Cement Concr. Compos., 28, 153, 10.1016/j.cemconcomp.2005.09.006

Akkurt, 2005, The shielding of γ-rays by concretes produced with barite, Prog. Nucl. Energy, 46, 1, 10.1016/j.pnucene.2004.09.015

Kharita, 2009, The effect of carbon powder addition on the properties of hematite radiation shielding concrete, Prog. Nucl. Energy, 51, 388, 10.1016/j.pnucene.2008.10.002

Sharifi, 2013, Comparison of shielding properties for ordinary, barite, serpentine and steel–magnetite concretes using MCNP-4C code and available experimental results, Ann. Nucl. Energy, 53, 529, 10.1016/j.anucene.2012.09.015

Ameri, 2019, Steel fibre-reinforced high-strength concrete incorporating copper slag: mechanical, gamma-ray shielding, impact resistance, and microstructural characteristics, J. Build. Eng., 101118

Najafabadi, 2019, The tensile performance of FRP bars embedded in concrete under elevated temperatures, Construct. Build. Mater., 211, 1138, 10.1016/j.conbuildmat.2019.03.239

Khaneghahi, 2018, Effect of intumescent paint coating on mechanical properties of FRP bars at elevated temperature, Polym. Test., 71, 72, 10.1016/j.polymertesting.2018.08.020

Shoaei, 2019, Waste ceramic powder-based geopolymer mortars: effect of curing temperature and alkaline solution-to-binder ratio, Construct. Build. Mater., 227, 116686, 10.1016/j.conbuildmat.2019.116686

Rajamane, 2013

Ameri, 2020, Partial replacement of copper slag with treated crumb rubber aggregates in alkali-activated slag mortar, Construct. Build. Mater., 256, 119468, 10.1016/j.conbuildmat.2020.119468