Mechanical and chemical recycling of solid plastic waste
Tóm tắt
Từ khóa
Tài liệu tham khảo
Abrol, 2012, Modeling, simulation and advanced control of methanol production from variable synthesis gas feed, Comput. Chem. Eng., 40, 117, 10.1016/j.compchemeng.2012.02.005
Aguado, 2006
Akesson, 2016, Recycling of wood fiber-reinforced HDPE by multiple reprocessing, J. Appl. Polym. Sci., 133
Al-Salem, 2009, Recycling and recovery routes of plastic solid waste (PSW): a review, Waste Manage., 29, 2625, 10.1016/j.wasman.2009.06.004
Al-Salem, S., Lettieri, P., Baeyens, J., 2009b. Thermal treatment of different grades and types of Polyethylene (PE) wasted articles. In: Proceedings of 8th World Congress of Chemical Engineering Montreal (Quebec), pp. 1–4.
Al-Salem, 2010, The valorization of plastic solid waste (PSW) by primary to quaternary routes: from re-use to energy and chemicals, Prog. Energy Combust. Sci., 36, 103, 10.1016/j.pecs.2009.09.001
Albrecht, 2011
Ali, 2015, Recent development in catalytic technologies for methanol synthesis from renewable sources: a critical review, Renew. Sustain. Energy Rev., 44, 508, 10.1016/j.rser.2015.01.010
Altwaiq, 2003, Extraction of brominated flame retardants from polymeric waste material using different solvents and supercritical carbon dioxide, Anal. Chim. Acta, 491, 111, 10.1016/S0003-2670(03)00785-2
Angyal, 2007, Petrochemical feedstock by thermal cracking of plastic waste, J. Anal. Appl. Pyrol., 79, 409, 10.1016/j.jaap.2006.12.031
Ares, 2010, Rheological, mechanical and thermal behaviour of wood polymer composites based on recycled polypropylene, J. Polym. Environ., 18, 318, 10.1007/s10924-010-0208-x
Arnold, 2009, Void formation due to gas evolution during the recycling of Acrylonitrile-Butadiene-Styrene copolymer (ABS) from waste electrical and electronic equipment (WEEE), Polym. Degrad. Stabil., 94, 693, 10.1016/j.polymdegradstab.2008.12.019
Arostegui, 2006, Effect of dissolution-based recycling on the degradation and the mechanical properties of acrylonitrile-butadiene-styrene copolymer, Polym. Degrad. Stabil., 91, 2768, 10.1016/j.polymdegradstab.2006.03.019
Arvanitoyannis, 2001, Recycling of polymeric materials used for food packaging: current status and perspectives, Food Rev. Int., 17, 291, 10.1081/FRI-100104703
Ashcraft, 2012, Modeling fast biomass pyrolysis in a gas–solid vortex reactor, Chem. Eng. J., 207–208, 195, 10.1016/j.cej.2012.06.048
Ashcraft, 2013, Assessment of a gas-solid vortex reactor for SO2/NOx adsorption from flue gas, Ind. Eng. Chem. Res., 52, 861, 10.1021/ie300399w
Bai, 2007, Reprocessing acrylonitrile-butadiene-styrene plastics: structure-property relationships, Polym. Eng. Sci., 47, 120, 10.1002/pen.20681
Banerjee, 2016, Impact modification of isotactic polypropylene with ethylene-propylene diene monomer rubber, Int. Polym. Proc, 16
Barger, P.T., Wilson, S.T., Holmgren, J.S., 1993. Process for Converting Methanol to Olefins Using an Improved Metal Aluminophosphate Catalyst. Google Patents.
Beigbeder, 2013, Study of the physico-chemical properties of recycled polymers from waste electrical and electronic equipment (WEEE) sorted by high resolution near infrared devices, Resour. Conserv. Recy., 78, 105, 10.1016/j.resconrec.2013.07.006
Beyler, 2002, Thermal decomposition of polymers, SFPE Handb. Fire Protect. Eng., 2, 110
Bhaskar, 2003, Liquefaction of mixed plastics containing PVC and dechlorination by calcium-based sorbent, Energy Fuels, 17, 75, 10.1021/ef020091g
Blom, 1998, PP/PE blends. IV. Characterization and compatibilization of blends of postconsumer resin with virgin PP and HDPE, J. Appl. Polym. Sci., 70, 2081, 10.1002/(SICI)1097-4628(19981212)70:11<2081::AID-APP2>3.0.CO;2-4
Boldizar, 2003, Degradation of ABS during repeated processing and accelerated ageing, Polym. Degrad. Stabil., 81, 359, 10.1016/S0141-3910(03)00107-1
Bonifazi, 2016, FT-IR analysis and hyperspectral imaging applied to postconsumer plastics packaging characterization and sorting, IEEE Sensors J., 16, 3428, 10.1109/JSEN.2015.2449867
Borovanska, 2016, Recycled polyolefin blends: effect of modified natural zeolite on their properties and morphology, Polym. Plast. Technol. Eng., 55, 486, 10.1080/03602559.2015.1070865
Brems, 2012, Recycling and recovery of post-consumer plastic solid waste in a European context, Therm. Sci., 16, 669, 10.2298/TSCI120111121B
Brems, 2015
Brennan, 2002, Recycling of acrylonitrile-butadiene-styrene and high-impact polystyrene from waste computer equipment, J. Appl. Polym. Sci., 86, 572, 10.1002/app.10833
Broach, 2012
Brown, S.H., Shinnar, R., Weber, W.A., 2005. Process for Converting Methanol to Olefins. Google Patents.
Buekens, 2014, Recycling of WEEE plastics: a review, J. Mater. Cycles Waste, 16, 415, 10.1007/s10163-014-0241-2
Buekens, 1998, Catalytic plastics cracking for recovery of gasoline-range hydrocarbons from municipal plastic wastes, Resour. Conserv. Recycl., 23, 163, 10.1016/S0921-3449(98)00025-1
Butler, 2011, Waste polyolefins to liquid fuels via pyrolysis: review of commercial state-of-the-art and recent laboratory research, Waste Biomass Valoriz., 2, 227, 10.1007/s12649-011-9067-5
Callister, 2010
Censori, 2016, Separation of plastics: the importance of kinetics knowledge in the evaluation of froth flotation, Waste Manage., 54, 39, 10.1016/j.wasman.2016.05.021
Champagne, 1999, Reactive compatibilization of polypropylene/polyethylene terephthalate blends, Polym. Eng. Sci., 39, 976, 10.1002/pen.11487
Chevallier, 2013, Polystyrene/polycarbonate blends compatibilization: morphology, rheological and mechanical properties, Mater. Chem. Phys., 139, 616, 10.1016/j.matchemphys.2013.02.006
Chiono, 2003, Reactive compatibilizer precursors for LDPE/PA6 blends. III: ethylene–glycidylmethacrylate copolymer, Polym., 44, 2423, 10.1016/S0032-3861(03)00134-4
Dasdemir, 2015, Reactive compatibilization of polyamide 6/polyethylene nonwoven based thermoplastic composites, Eur. Polymer J., 63, 194, 10.1016/j.eurpolymj.2014.12.019
de Broqueville, A., 2009. Process for the thermal and/or catalytic conversion of reactive fluids passing through various longitudinal reaction volumes of a rotating fluidized bed.
De Wilde, 2007, Rotating fluidized beds in a static geometry: experimental proof of concept, AIChE J., 53, 793, 10.1002/aic.11139
De Wilde, 2008, Experimental investigation of a rotating fluidized bed in a static geometry, Powder Technol., 183, 426, 10.1016/j.powtec.2008.01.024
Delva, L., Cardon, L., Ragaert, K., 2015. Evaluation of post-consumer mixed polyolefines and their injection moulded blends with virgin poly-ethylene. Environ. Eng. Manage. J. (in press).
Delva, 2014, The effect of multiple extrusions on the properties of montmorillonite filled polypropylene, Polymers, 6, 2912, 10.3390/polym6122912
Delva, L., Verberckmoes, A., Cardon, L., Ragaert, K., 2013. The use of rubber as a compatibilizer for injection moulding of recycled post-consumer mixed polyolefines. In: 2nd international conference WASTES: Solutions, Treatments and Opportunities. CVR, Braga, Portugal, pp. 689–694.
Denkstatt, 2015. The potential for plastics packaging to contribute to a circular and resource-efficient economy, Identiplast.
Dimonie, 2012
Ding, 1997, Hydrocracking and hydroisomerization of high-density polyethylene and waste plastic over zeolite and silica-alumina-supported Ni and Ni-Mo sulfides, Energy Fuels, 11, 1219, 10.1021/ef970051q
Dry, 2002, High quality diesel via the Fischer-Tropsch process–a review, J. Chem. Technol. Biotechnol., 77, 43, 10.1002/jctb.527
Dudyński, 2015, Biomass gasification: influence of torrefaction on syngas production and tar formation, Fuel Process. Technol., 131, 203, 10.1016/j.fuproc.2014.11.018
Dutta, 2010, Rotating fluidized bed with a static geometry: Guidelines for design and operating conditions, Chem. Eng. Sci., 65, 1678, 10.1016/j.ces.2009.11.013
Ekatpure, 2011, Experimental investigation of a gas–solid rotating bed reactor with static geometry, Chem. Eng. Process., 50, 77, 10.1016/j.cep.2010.11.010
El-Nashar, 2008, Improving low-density polyethylene/poly(ethylene terephthalate) blends with graft copolymers, J. Appl. Polym. Sci., 110, 1929, 10.1002/app.28503
Ellen Macarthur Foundation, 2017. The New Plastics Economy: Catalysing Action.
Elmaghor, 2004, Recycling of polycarbonate by blending with maleic anhydride grafted ABS, Polym., 45, 6719, 10.1016/j.polymer.2004.07.022
EU-Parliament, 2015. Circular economy: the importance of re-using products and materials.
European Commission, 2013. On a European Strategy on Plastic Waste in the Environment, Green Paper. European Commision, Brussels.
European Commission, 2009. Ecodesign Directive (Directive 2009/125/EC). Brussels.
European Commission, 2015. Closing the Loop - An EU Action Plan for the Circular Economy (COM(2015) 614/2. Brussels.
Faravelli, 2003, Kinetic modeling of the thermal degradation of polyethylene and polystyrene mixtures, J. Anal. Appl. Pyrol., 70, 761, 10.1016/S0165-2370(03)00058-5
Faravelli, 1999, Gas product distribution from polyethylene pyrolysis, J. Anal. Appl. Pyrol., 52, 87, 10.1016/S0165-2370(99)00032-7
FostPlus, 2014
Fraunholcz, 2004, Separation of waste plastics by froth flotation - a review, part I, Miner. Eng., 17, 261, 10.1016/j.mineng.2003.10.028
Garforth, 2004, Feedstock recycling of polymer wastes, Curr. Opin. Solid State Mater. Sci., 8, 419, 10.1016/j.cossms.2005.04.003
George, 2014, Recent developments in the chemical recycling of postconsumer poly(ethylene terephthalate) waste, Ind. Eng. Chem. Res., 53, 14185, 10.1021/ie501995m
GmbH, A.
González-González, 1998, Polypropylene chain scissions and molecular weight changes in multiple extrusion, Polym. Degrad. Stab., 60, 33, 10.1016/S0141-3910(96)00233-9
Gonzalez-Quiroga, 2016, Conversion of solid waste to diesel via catalytic pressureless depolymerization: pilot scale production and detailed compositional characterization, Energy Fuels, 30, 8292, 10.1021/acs.energyfuels.6b01639
Goto, 2009, Chemical recycling of plastics using sub- and supercritical fluids, J. Supercrit. Fluids, 47, 500, 10.1016/j.supflu.2008.10.011
Gu, 2016, Use of recycled plastics in concrete: a critical review, Waste Manage., 51, 19, 10.1016/j.wasman.2016.03.005
Guerfi, 2014, Preparation, characterization and valorization of regenerated low density polyethylene/polypropylene blends, Environ. Eng. Manage. J., 13, 2609, 10.30638/eemj.2014.291
Guo, 2009, Recycling of non-metallic fractions from waste printed circuit boards: a review, J. Hazard. Mater., 168, 567, 10.1016/j.jhazmat.2009.02.104
Haro, 2013, Bio-syngas to gasoline and olefins via DME–a comprehensive techno-economic assessment, Appl. Energy, 108, 54, 10.1016/j.apenergy.2013.03.015
Heidenreich, 2015, New concepts in biomass gasification, Prog. Energy Combust. Sci., 46, 72, 10.1016/j.pecs.2014.06.002
Hlavatá, 2001, Compatibilization efficiency of styrene–butadiene multiblock copolymers in PS/PP blends, J. Polym. Sci., Part B: Polym. Phys., 39, 931, 10.1002/polb.1068
Holsti-Miettinen, 1994, Functionalized elastomeric compatibilizer in PA 6/PP blends and binary interactions between compatibilizer and polymer, Polym. Eng. Sci., 34, 395, 10.1002/pen.760340504
Hopewell, 2009, Plastics recycling: challenges and opportunities, Philos. Trans. R. Soc. B-Biol. Sci., 364, 2115, 10.1098/rstb.2008.0311
Hubo, S., Delva, L., Van Damme, N., Ragaert, K., 2015. Blending of recycled mixed polyolefins with recycled polypropylene: effect on physical and mechanical properties. In: Holzer, C. (Ed.), Polymer Processing Society 2015, Graz Austria.
Hubo, 2014, Evaluation of post-industrial and post-consumer polyolefin-based polymer waste streams for injection moulding, 201
Hubo, 2016, Mirror welding of recycled polyolefins
Huggett, 1987, Toxicity of the pyrolysis and combustion products of poly(vinyl chlorides): a literature assessment, Fire Mater, 11, 131, 10.1002/fam.810110303
Ismail, 2002, The effect of various compatibilizers on mechanical properties of polystyrene/polypropylene blend, Polym. Test., 21, 163, 10.1016/S0142-9418(01)00064-2
Jeon, 2005, Enhancement of compatibility and toughening of commingled packaging film wastes, Polym.-Korea, 29, 127
Jiang, 2003, Reactive compatibilizer precursors for LDPE/PA6 blends. II: maleic anhydride grafted polyethylenes, Polym., 44, 2411, 10.1016/S0032-3861(03)00133-2
Jin, 1998, Compatibility enhancement of ABS/polycarbonate blends, J. Appl. Polym. Sci., 69, 533, 10.1002/(SICI)1097-4628(19980718)69:3<533::AID-APP13>3.0.CO;2-U
Kaiser, 2015
Kallel, 2003, Compatibilization of PE/PS and PE/PP blends. I. Effect of processing conditions and formulation, J. Appl. Polym. Sci., 90, 2475, 10.1002/app.12873
Kaminsky, 2004, Feedstock recycling of polymers by pyrolysis in a fluidised bed, Polym. Degrad. Stabil., 85, 1045, 10.1016/j.polymdegradstab.2003.05.002
Kazemi, 2015, Compatibilization efficiency in post-consumer recycled polyethylene/polypropylene blends: effect of contamination, Polym. Eng. Sci., 55, 2368, 10.1002/pen.24125
Keil, 1999, Methanol-to-hydrocarbons: process technology, Microp. Mesop. Mater., 29, 49, 10.1016/S1387-1811(98)00320-5
Koch, C., 2011. The KDV Technology [Company Presentation]. Alphakat GmbH.
Koning, 1998, Strategies for compatibilization of polymer blends, Prog. Polym. Sci., 23, 707, 10.1016/S0079-6700(97)00054-3
Kovacevic, 2014, Bed stability and maximum solids capacity in a gas-solid vortex reactor: experimental study, Chem. Eng. Sci., 106, 293, 10.1016/j.ces.2013.11.018
Kovacevic, 2015, Solids velocity fields in a cold-flow gas-solid vortex reactor, Chem. Eng. Sci., 123, 220, 10.1016/j.ces.2014.10.020
Kumar, 2009, Thermochemical biomass gasification: a review of the current status of the technology, Energies, 2, 556, 10.3390/en20300556
Kumar, 2011, A review on tertiary recycling of high-density polyethylene to fuel, Resour. Conserv. Recycl., 55, 893, 10.1016/j.resconrec.2011.05.005
Kunststofindustrie, F.N.R.e., 2015. Caseguide Ontwerpen met Kunststof Recyclaat.
Kuram, 2014, Recyclability of polyethylene/polypropylene binary blends and enhancement of their mechanical properties by reinforcement with glass fiber, Polym. Plast. Technol. Eng., 53, 1035, 10.1080/03602559.2014.886066
La Mantia, 1996, Basic Concepts on the Recycling of Homogeneous and Heterogeneous Plastics
La Mantia, F.P., 1996b. Recycling of PVC and Mixed Plastic Waste. ChemTec Publishing.
La Mantia, 1994, Recycling poly(ethyleneterephthalate), Polym. Degrad. Stabil., 45, 121, 10.1016/0141-3910(94)90187-2
Labeckas, 2013, Performance and emission characteristics of a direct injection diesel engine operating on KDV synthetic diesel fuel, Energy Convers. Manage., 66, 173, 10.1016/j.enconman.2012.10.004
Leong, 2004, Comparison of the mechanical properties and interfacial interactions between talc, kaolin, and calcium carbonate filled polypropylene composites, J. Appl. Polym. Sci., 91, 3315, 10.1002/app.13542
Lepers, 1997, The relative role of coalescence and interfacial tension in controlling dispersed phase size reduction during the compatibilization of polyethylene terephthalate/polypropylene blends, J. Polym. Sci., Part B: Polym. Phys., 35, 2271, 10.1002/(SICI)1099-0488(199710)35:14<2271::AID-POLB7>3.0.CO;2-Z
Li, 2014, Enhancing the production of renewable petrochemicals by co-feeding of biomass with plastics in catalytic fast pyrolysis with ZSM-5 zeolites, Appl. Catal. A, 481, 173, 10.1016/j.apcata.2014.05.015
Lin, 2009, Tertiary recycling of commingled polymer waste over commercial FCC equilibrium catalysts for producing hydrocarbons, Polym. Degrad. Stabil., 94, 25, 10.1016/j.polymdegradstab.2008.10.018
Lin, 2013, Crystallization and melting behavior of polypropylene in β-PP/polyamide 6 blends containing PP-g-MA, J. Ind. Eng. Chem., 19, 692, 10.1016/j.jiec.2012.10.004
Linck, 2014, Integrated biomass hydropyrolysis and hydrotreating: a brief review, Wiley Interdisc. Rev.: Energy Environ., 3, 575
Liu, 1996, Study of dispersion morphologies of isotactic polypropylene and linear low density polyethylene blends by scanning electron microscopy, J. Appl. Polym. Sci., 60, 1461, 10.1002/(SICI)1097-4628(19960531)60:9<1461::AID-APP21>3.0.CO;2-3
Luciani, 2015, Upgrading of PVC rich wastes by magnetic density separation and hyperspectral imaging quality control, Waste Manage., 45, 118, 10.1016/j.wasman.2014.10.015
Luijsterburg, 2014, Assessment of plastic packaging waste: Material origin, methods, properties, Resour. Conserv. Recy., 85, 88, 10.1016/j.resconrec.2013.10.010
Luijsterburg, 2016, Solid-state drawing of post-consumer isotactic poly(propylene): effect of melt filtration and carbon black on structural and mechanical properties, Waste Manage., 54, 53, 10.1016/j.wasman.2016.04.029
Maier, 2008
Manias, 2014, Thermodynamics of Polymer Blends
Marker, T., Roberts, M., Linck, M., Felix, L., Ortiz-Toral, P., Wangerow, J., McLeod, C., Del Paggio, A., Gephart, J., Starr, J., 2013. Long Term Processing Using Integrated Hydropyrolysis plus Hydroconversion (IH2) for the Production of Gasoline and Diesel from Biomass. Gas Technology Institute.
Marker, 2012, Integrated hydropyrolysis and hydroconversion (IH2) for the direct production of gasoline and diesel fuels or blending components from biomass, part 1: proof of principle testing, Environ. Prog. Sustain., 31, 191, 10.1002/ep.10629
Marker, 2014, Integrated hydropyrolysis and hydroconversion (IH2®) for the direct production of gasoline and diesel fuels or blending components from biomass, Part 2: continuous testing, Environ. Prog. Sustain., 33, 762, 10.1002/ep.11906
Marongiu, 2003, Thermal degradation of poly (vinyl chloride), J. Anal. Appl. Pyrol., 70, 519, 10.1016/S0165-2370(03)00024-X
Marongiu, 2007, Detailed kinetic modeling of the thermal degradation of vinyl polymers, J. Anal. Appl. Pyrol., 78, 343, 10.1016/j.jaap.2006.09.008
Martinho, 2012, Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling, Waste Manage., 32, 1213, 10.1016/j.wasman.2012.02.010
Miskolczi, 2009, Fuels by pyrolysis of waste plastics from agricultural and packaging sectors in a pilot scale reactor, Fuel Process. Technol., 90, 1032, 10.1016/j.fuproc.2009.04.019
Miskolczi, 2004, Thermal degradation of municipal plastic waste for production of fuel-like hydrocarbons, Polym. Degrad. Stabil., 86, 357, 10.1016/j.polymdegradstab.2004.04.025
Moller, 1995
Mou, 2007, Products made from nonmetallic materials reclaimed from waste printed circuit boards, Tsinghua Sci. Technol., 12, 276, 10.1016/S1007-0214(07)70041-X
Munasinghe, 2010, Biomass-derived syngas fermentation into biofuels: opportunities and challenges, Bioresour. Technol., 101, 5013, 10.1016/j.biortech.2009.12.098
Murphy, 2001, 237
Narasimhan, L., Del Paggion, A., 2017. Hydrocarbon Fuels from Bio-Waste –An Integrated Energy-Environmental Solution <http://www.fipi.org.in/attachments/11_May_16/Session%20I/3_C%20S%20Laxmi.pdf>.
Ohishi, 2001, Phase morphologies and mechanical properties of high-impact polystyrene (HIPS) and polycarbonate blends compatibilized with polystyrene and polyarylate block copolymer, J. Appl. Polym. Sci., 80, 2347, 10.1002/app.1341
Okuwaki, 2004, Feedstock recycling of plastics in Japan, Polym. Degrad. Stabil., 85, 981, 10.1016/j.polymdegradstab.2004.01.023
Oliveux, 2012, Chemical recycling of glass fibre reinforced composites using subcritical water, Compos. Part A-Appl. Sci., 43, 1809, 10.1016/j.compositesa.2012.06.008
Paabo, 1987, A review of the literature on the gaseous products and toxicity generated from the pyrolysis and combustion of rigid polyurethane foams, Fire Mater, 11, 1, 10.1002/fam.810110102
Pang, 2000, Effects of a compatibilizing agent on the morphology, interface and mechanical behaviour of polypropylene/poly(ethylene terephthalate) blends, Polym., 41, 357, 10.1016/S0032-3861(99)00123-8
Papadopoulou, 2000, Comparison of compatibilizer effectiveness for PET/PP blends: their mechanical, thermal and morphology characterization, Polym., 41, 2543, 10.1016/S0032-3861(99)00442-5
Passamonti, 2012, Recycling of waste plastics into fuels. LDPE conversion in FCC, Appl. Catal. B, 125, 499, 10.1016/j.apcatb.2012.06.020
Petcore.
Peydro, 2013, Recovery of recycled acrylonitrile-butadiene-styrene, through mixing with styrene-ethylene/butylene-styrene, J. Mater. Process. Technol., 213, 1268, 10.1016/j.jmatprotec.2013.02.012
Pinheiro, 2004, The role of chain scission and chain branching in high density polyethylene during thermo-mechanical degradation, Polym. Degrad. Stabil., 86, 445, 10.1016/j.polymdegradstab.2004.05.016
Pinto, 1999, Pyrolysis of plastic wastes: 2. Effect of catalyst on product yield, J. Anal. Appl. Pyrol., 51, 57, 10.1016/S0165-2370(99)00008-X
PlasticsEurope, 2015
PlasticsEurope, EuPC, EuPR, EPRO, 2015. Plastics - the Facts 2015. An Analysis of European Plastics Production, Demand and Recovery for 2015.
Pluta, 2001, Phase structure and viscoelastic properties of compatibilized blends of PET and HDPE recyclates, J. Appl. Polym. Sci., 82, 1423, 10.1002/app.1980
Pohlein, 2005, Rapid identification of RoHS-relevant flame retardants from polymer housings by ultrasonic extraction and RP-HPLC/UV, J. Chromatogr. A, 1066, 111, 10.1016/j.chroma.2005.01.036
Pu, 1998, Studies on polycarbonate/polystyrene/polycarbonate-graft-polystyrene blends. II. Compatibility and morphology of PC/PS/PC-g-PS blends, Polym. Int., 45, 169, 10.1002/(SICI)1097-0126(199802)45:2<169::AID-PI859>3.0.CO;2-4
Puig-Arnavat, 2010, Review and analysis of biomass gasification models, Renew. Sustain. Energy Rev., 14, 2841, 10.1016/j.rser.2010.07.030
Qian, 2011, Thermal degradation behavior of polypropylene in the melt state: molecular weight distribution changes and chain scission mechanism, Polym. Bull., 67, 1661, 10.1007/s00289-011-0560-6
Radonjic, 2002, The use of ethylene/propylene copolymers as compatibilizers for recycled polyolefin blends, Macromol. Mater. Eng., 287, 122, 10.1002/1439-2054(20020201)287:2<122::AID-MAME122>3.0.CO;2-A
Ragaert, K., 2016. Trends in mechanical recycling of thermoplastics. In: Pinter, G., Pilz, G. (Eds.), 25. Leobener Kunststoff-Kolloquium 2016. Leoben, Austria.
Ragaert, K., Hubo, S., Van Damme, N., Veelaert, L., De Meester, S., Du Bois, E., 2016. Design from Recycling: Identifying applications for recycled polymers. In: Maazouz, A. (Ed.), 32nd Polymer Processing Society, Lyon, France.
Ranzi, 1997, Kinetic modeling of polyethylene and polypropylene thermal degradation, J. Anal. Appl. Pyrol., 40, 305, 10.1016/S0165-2370(97)00032-6
Reinsch, 2014, Continuous electric sorting in the recycling process of plastics, Chem. Ing. Tec., 86, 784, 10.1002/cite.201400010
Rem, 2013, Magnetic fluid equipment for sorting secondary polyolefins from waste, Environ. Eng. Manage. J., 12, 951, 10.30638/eemj.2013.118
Reza, F., Bahram, S., 2015. Feasibility study and quality assurance ofthe end-product ofAlphakat KDV technology forconversion of biomass.
Rijpkema, L., 1999. PVC and Municipal Solid Waste Combustion: Burden or Benefit? TNO Institute of Environmental Sciences, Energy Research and Process Innovation TNO-MEP 99, p. 462.
Rodrigo, J., Castells, F., 2002. Electrical and Electronic Practical Ecodesign Guide.
Ruiz, 2013, Biomass gasification for electricity generation: Review of current technology barriers, Renew. Sustain. Energy Rev., 18, 174, 10.1016/j.rser.2012.10.021
Rutkowski, 1986, Acrylonitrile–butadiene–styrene copolymers (ABS): Pyrolysis and combustion products and their toxicity—a review of the literature, Fire Mater, 10, 93, 10.1002/fam.810100303
Sadat-Shojai, 2011, Recycling of PVC wastes, Polym. Degrad. Stabil., 96, 404, 10.1016/j.polymdegradstab.2010.12.001
Safi, 2013, The use of plastic waste as fine aggregate in the self-compacting mortars: effect on physical and mechanical properties, Constr. Build. Mater., 43, 436, 10.1016/j.conbuildmat.2013.02.049
Sanchez-Valdes, 2013, Effect of functionalized polyethylenes on clay dispersion in high density polyethylene nanocomposites, Polym. Bull., 70, 535, 10.1007/s00289-012-0850-7
Scaffaro, 2012, Physical properties of virgin-recycled ABS blends: effect of post-consumer content and of reprocessing cycles, Eur. Polymer J., 48, 637, 10.1016/j.eurpolymj.2011.12.018
Scheirs, 1998
Scheirs, 2006
Schirmer, 2001, Catalytic degradation of polyethylene using thermal gravimetric analysis and a cycled-spheres-reactor, J. Anal. Appl. Pyrol., 60, 205, 10.1016/S0165-2370(00)00197-2
Serrano, 2012, Developing advanced catalysts for the conversion of polyolefinic waste plastics into fuels and chemicals, ACS Catalysis, 2, 1924, 10.1021/cs3003403
Serranti, 2015, An innovative recycling process to obtain pure polyethylene and polypropylene from household waste, Waste Manage., 35, 12, 10.1016/j.wasman.2014.10.017
Sharma, 2016, Use of different forms of waste plastic in concrete – a review, J. Clean. Product., 112, 473, 10.1016/j.jclepro.2015.08.042
Shell, 2017. Back to the Future: Could Cars One Day be Powered by Waste? <http://www.shell.com/inside-energy/back-to-the-future.html>.
Siddique, 2008, Use of recycled plastic in concrete: a review, Waste Manage., 28, 1835, 10.1016/j.wasman.2007.09.011
Souza, 2002, Influence of coalescence and interfacial tension on the morphology of PP/HDPE compatibilized blends, Polym., 43, 3959, 10.1016/S0032-3861(02)00223-9
Spath, P.L., Dayton, D.C., 2003. Preliminary Screening-Technical and Economic Assessment of Synthesis Gas to Fuels and Chemicals with Emphasis on the Potential for Biomass-Derived Syngas. DTIC Document.
Stenvall, 2016, Mechanical and thermal characterization of melt-filtered, blended and reprocessed post-consumer WEEE thermoplastics, Recycling, 1, 89, 10.3390/recycling1010089
Stenvall, 2013, An analysis of the composition and metal contamination of plastics from waste electrical and electronic equipment (WEEE), Waste Manage., 33, 915, 10.1016/j.wasman.2012.12.022
Su, 2007, Influence of reprocessing on the mechanical properties and structure of polyamide 6, J. Mater. Process. Technol., 192–193, 532, 10.1016/j.jmatprotec.2007.04.056
Tarantili, 2010, Processing and properties of engineering plastics recycled from waste electrical and electronic equipment (WEEE), Polym. Degrad. Stabil., 95, 405, 10.1016/j.polymdegradstab.2009.11.029
Teh, 1994, A review of polyethylene-polypropylene blends and their compatibilization, Adv. Polym. Technol., 13, 1, 10.1002/adv.1994.060130101
Thegarid, 2014, Second-generation biofuels by co-processing catalytic pyrolysis oil in FCC units, Appl. Catal. B, 145, 161, 10.1016/j.apcatb.2013.01.019
Tjong, 2000, Effect of reactive compatibilizers on the mechanical properties of polycarbonate/poly(acrylonitrile-butadiene-styrene) blends, Eur. Polymer J., 36, 123, 10.1016/S0014-3057(99)00044-0
Trippe, 2011, Techno-economic assessment of gasification as a process step within biomass-to-liquid (BtL) fuel and chemicals production, Fuel Process. Technol., 92, 2169, 10.1016/j.fuproc.2011.06.026
Tullo, 2016, The cost of plastic packaging, Chem. Eng. News, 94, 32
Twite-Kabamba, 2011, Properties of recycled LDPE/Birch fibre composites, Prog. Rubber Plast. Recyc. Technol., 27, 1, 10.1177/147776061102700101
Ulutan, 2003, Influence of additional thermal stabilizers on the reprocessing of postconsumer poly(vinyl chloride) bottles, J. Appl. Polym. Sci., 90, 3994, 10.1002/app.13133
Utracki, L.A., Dumoulin, M.M., 1995. Polypropylene alloys and blends with thermoplastics. In: Karger-Kochis (Ed.), Polypropylene: Structure, Blends and Composites. Chapman and Hall, London, p. 50.
van Bruggen, 2016, Influence of processing parameters and composition on the effective compatibilization of polypropylene–poly(ethylene terephthalate) blends, Int. Polym. Proc., 31, 179, 10.3139/217.3124
Van Damme, N., Leroy, S., Van Loocke, S., Hubo, S. Veelaert, L., Cardon, L., Dubois, E., Ragaert, K., 2016. Upgrading of recycled ABS from ELV and WEEE. In: 7th International Polymer and Materials Innocations Conference. Ghent, Belgium.
Veelaert, L., Ragaert, K., Hubo, S., Van Kets, K., De Bois, E., 2016. Bridging design and engineering in terms of materials selection. In: 7th Polymers and Moulds Innovations Conference. Ghent Belgium.
Vermeulen, 2011, Automotive shredder residue (ASR): reviewing its production from end-of-life vehicles (ELVs) and its recycling, energy or chemicals’ valorisation, J. Hazard. Mater., 190, 8, 10.1016/j.jhazmat.2011.02.088
Vilaplana, 2008, Quality concepts for the improved use of recycled polymeric materials: a review, Macromol. Mater. Eng., 293, 274, 10.1002/mame.200700393
Walendziewski, 2001, Thermal and catalytic conversion of waste polyolefines, Catal. Today, 65, 323, 10.1016/S0920-5861(00)00568-X
Wang, 2015, Flotation separation of waste plastics for recycling-a review, Waste Manage., 41, 28, 10.1016/j.wasman.2015.03.027
Wang, 2015, Recycling of acrylonitrile-butadiene-styrene (ABS) copolymers from waste electrical and electronic equipment (WEEE), through using an epoxy-based chain extender, Polym. Degrad. Stabil., 112, 167, 10.1016/j.polymdegradstab.2014.12.025
Welle, 2011, Twenty years of PET bottle to bottle recycling—an overview, Resour. Conserv. Recycl., 55, 865, 10.1016/j.resconrec.2011.04.009
Wender, 1996, Reactions of synthesis gas, Fuel Process. Technol., 48, 189, 10.1016/S0378-3820(96)01048-X
Westerhout, 1998, Techno-economic evaluation of high temperature pyrolysis processes for mixed plastic waste, Chem. Eng. Res. Des., 76, 427, 10.1205/026387698524857
Wilhelm, 2001, Syngas production for gas-to-liquids applications: technologies, issues and outlook, Fuel Process. Technol., 71, 139, 10.1016/S0378-3820(01)00140-0
World Economic Forum, Ellen MacArthur Foundation, Company, M., 2016. The New Plastics Economy - Rethinking the Future of Plastics.
Xanthos, 1990, Polypropylene/polyethylene terephthalate blends compatibilized through functionalization, Polym. Eng. Sci., 30, 355, 10.1002/pen.760300607
Xiang, 2002, Effects of melt reprocessing on volatile emissions and structural/rheological changes of unstabilized polypropylene, Polym. Degrad. Stabil., 77, 93, 10.1016/S0141-3910(02)00083-6
Yan, 2015, Thermal cracking of virgin and waste plastics of PP and LDPE in a semi-batch reactor under atmospheric pressure, Energy Fuels, 10.1021/ef502919f
Yao, 2000, Morphology, thermal behavior, and mechanical properties of PA6/UHMWPE blends with HDPE-g-MAH as a compatibilizing agent, J. Appl. Polym. Sci., 75, 232, 10.1002/(SICI)1097-4628(20000110)75:2<232::AID-APP5>3.0.CO;2-L
Yu, 2016, Thermal degradation of PVC: a review, Waste Manage., 48, 300, 10.1016/j.wasman.2015.11.041
Zhang, 2001, Effects of ABS-g-MAH on mechanical properties and compatibility of ABS/PC alloy, J. Appl. Polym. Sci., 81, 831, 10.1002/app.1502
Zhang, 2011, Effects of different types of polyethylene on the morphology and properties of recycled poly(ethylene terephthalate)/polyethylene compatibilized blends, Polym. Adv. Technol., 22, 1851, 10.1002/pat.1683