Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Tính Chất Cơ Học của Các Vật Liệu T composite GF/pCBT và Các Mối Nối Liên Kết Nung Chảy của Chúng: Ảnh Hưởng Của Các Tham Số Quá Trình
Tóm tắt
Độ nhớt cao trong quá trình chảy nóng chảy của các composite nhiệt dẻo không cho phép sử dụng một lượng lớn các tác nhân gia cường. Vấn đề này có thể được giải quyết bằng cách polymer hóa tại chỗ một loại nhựa cyclic butylene terephthalate (CBT) có độ nhớt cực thấp. Các composite poly(cyclic butylene terephthalate) (GF/pCBT) được gia cường bởi sợi thủy tinh liên tục với lượng sợi cao đã được sản xuất, và các tính chất cơ học trong mối liên hệ với tỷ lệ khối lượng chất xúc tác và tỷ lệ sợi đã được nghiên cứu. Độ bền kéo dọc của các composite được cải thiện khi tăng tỷ lệ thể tích sợi, và ảnh hưởng của tỷ lệ sợi đến độ bền cong của các composite với tỷ lệ sợi cao đã được đánh giá. Hơn nữa, các tính chất cơ học và cơ chế hư hỏng của các mối nối liên kết nung chảy của GF/pCBT với số lượng khu vực liên kết khác nhau ở các chiều dài khác nhau đã được điều tra. Đã phát hiện ra rằng có thể tạo ra các vật liệu composite có độ bền cao, có thể áp dụng cho các cấu trúc liên kết nung chảy.
Từ khóa
#tính chất cơ học #composite #GF/pCBT #nhựa CBT #liên kết nung chảy #sợi thủy tinhTài liệu tham khảo
J.-A. E. Månson, M. D. Wakeman, and N. Bernet, “Composite processing and manufacturing – An overview,” in: A. Kelly and C. Zweben (Eds.), Comprehensive Composite Materials, Vol. 2: Polymer Matrix Composites, Elsevier Science Ltd, Amsterdam, The Netherlands (2000), pp. 577–607.
M. Hou, L. Ye, and Y. W. Mai, “Manufacturing process and mechanical properties of thermoplastic composite components,” J. Mater. Process. Technol., 63, 334–338 (1997).
Z. Y. Jiang, S. Siengchin, and L. M. Zhou, “Poly(butylene terephthalate)/silica nanocomposites prepared from cyclic butylene terephthalate,” Composites: Part A, 40, 273–278 (2009).
K. Pang, R. Kotek, and A. Tonelli, “Review of conventional and novel polymerization processes for polyesters,” Progr. Polym. Sci., 31, No. 11, 1009–1037 (2006).
J. Baets, M. Dutoit, J. Devaux, and I. Verpoest, “Toughening of glass fiber reinforced composites with a cyclic butylene terephthalate matrix by addition of polycaprolactone,” Composites: Part A, 39, 13–18 (2008).
H. L. Chen, W. Yu, and C. X. Zhou, “Entropically-driven ring-opening polymerization of cyclic butylene terephthalate: Rheology and kinetics,” Polym. Eng. Sci., 52, No. 1, 91–101 (2012).
P. Hodge and H. M. Colquhoun, “Recent word on entropically-driven ring-opening polymerizations: some potential applications,” Polym. Adv. Technol., 16, No. 2, 84–94 (2005).
H. Parton, J. Baets, P. Lipnik, et al., “Properties of poly(butylene terephthatlate) polymerized from cyclic oligomers and its composites,” Polymer, 46, 9871–9880 (2005).
P. Fabbri, E. Bassoli, S. B. Bon, and L. Valentini, “Preparation and characterization of poly(butylene terephthalate)/grapheme composites by in-situ polymerization of cyclic butylene terephthalate,” Polymer, 53, No. 4, 897–902 (2012).
I. Yamaoka, “Anisotropic behaviour of styrene-butadiene-styrene triblock copolymer/methyl methacrylatestyrene copolymer blends,” Polymer, 39, No. 5, 1007–1257 (1998).
S. Vivekanandhan, M. Misra, and A. K. Mohanty, “Thermal, mechanical, and morphological investigation of injection molded poly(trimethylene terephthalate)/carbon fiber composites,” Polym. Compos., 33, No. 11, 1933–1940 (2012).
G. Lanciano, A. Greco, A. Maffezzoli, and L. Mascia, “Effects of thermal history in the ring opening polymerization of CBT and its mixtures with montmorillonite on the crystallization of the resulting poly(butylene terephthalate),” Thermochim. Acta, 493, 61–67 (2009).
Z. A. M. Ishad, P. P. Shang, and J. Karger-Kocsis, “A modulated DSC study on the in situ polymerization of cyclic butylene terephthalate oligomers,” J. Therm. Anal. Calorim., 84, No. 3, 637–641 (2006).
Z. Hashin, “Analysis of composite materials – A survey,” J. Appl. Mech., 50, No. 3, 481–505 (1983).
S. B. Brahim and R. B. Cheikh, “Influence of fibre orientation and volume fraction on the tensile properties of unidirectional Alfa-polyester composite,” Compos. Sci. Technol., 67, 140–147 (2007).
A. A. Abdulmajeed, T. O. Narhi, P. K. Vallittu, and L. V. Lassila, “The effect of high fiber fraction on some mechanical properties of unidirectional glass fiber-reinforced composite,” Dent. Mater., 27, No. 4, 313–321 (2011).