Mechanical Behavior of Composite Beams Considering Nonlinear Shear Stiffness of Clustered Studs
Tóm tắt
Clustered studs are suitable for use in prefabricated steel-concrete composite beams. As a kind of shear connector, clustered studs have a non-negligible influence on the mechanical behavior of structures. Based on the theory of elasticity, prefabricated composite beams investigated via laminated plane stress problem. The load-slip curves of the shear connectors are linearly processed, and through iterative calculations, the displacement and stress distribution functions of prefabricated composite beams are obtained. Then, a model test is carried out on the positive bending moment section of prefabricated composite beams. A sampling method with front segments controlled by the load and back segments controlled by the slip is adopted. This method provides a better rate of convergence and higher accuracy than those of other methods. The test results show that when the load is small and the composite beam is in the elastic stage, the slope of the load-slip curve can be used as the shear stiffness of the clustered studs. When the load is large and the composite beam enters the plastic stage, the nonlinear shear stiffness of the studs must be considered to obtain a high-precision solution.
Tài liệu tham khảo
Chen SM (2005) Experimental study of prestressed steel-concrete composite beams with external tendons for negative moments. Journal of Constructional Steel Research 61(12):1613–1630, DOI: https://doi.org/10.1016/j.jcsr.2005.05.005
Chen J, Wang W, Ding FX, Xiang P, Yu YJ, Liu XM, Xu F, Yang CQ, Long SG (2019) Behavior of an advanced bolted shear connector in prefabricated steel-concrete composite beams. Materials 12(18): 2958–2958, DOI: https://doi.org/10.3390/ma12182958
Chen WQ, Xu RQ, Wu YF (2007) State space formulation for composite beam-columns with partial interaction. Composites Science and Technology 67(11):2500–2512, DOI: https://doi.org/10.1016/j.compscitech.2006.12.013
Chen Q, Zhou D, Liu D, Zhang JD (2017) Mechanical properties analysis of composite beam bridge with cluster rigid connectors. Chinese Quarterly of Mechanics 38(3):487–495, DOI: https://doi.org/10.15959/j.cnki.0254-0053.2017.03.010 (in Chinese)
Chen Q, Zhou D, Liu D, Zhang JD (2018) Mechanical properties analysis of composite beam bridge with cluster elastic connectors. Chinese Journal of Applied Mechanics 35(1):211–217, DOI: https://doi.org/10.11776/cjam.35.01.B116 (in Chinese)
Chiorean CG, Buru SM (2017) Practical nonlinear inelastic analysis method of composite steel-concrete beams with partial composite action. Engineering Structures 134 (Mar.1):74–106, DOI: https://doi.org/10.1016/j.engstruct.2016.12.017
Culmo MP (2011) Accelerated bridge construction — Experience in design, fabrication and erection of prefabricated bridge elements and systems. Bridge Members
Ding JN, Zhu JS, Kang JF, Wang XC (2021) Experimental study on grouped stud shear connectors in precast steel-uhpc composite bridge. Engineering Structures 242(8):112479, DOI: https://doi.org/10.1016/j.engstruct.2021.112479
Dong HY, Zhao YZ, Cao WL, Chen XP, Zhang JW (2021) Interfacial bond-slip behaviour between reinforced high-strength concrete and built-in steel plate with studs. Engineering Structures 226(3):111317, DOI: https://doi.org/10.1016/j.engstruct.2020.111317
Faella C, Martinelli E, Nigro E (2003) Shear connection nonlinearity and deflections of steel-concrete composite beams: A simplified method. Journal of Structural Engineering 129(1):12–20, DOI: https://doi.org/10.1061/(ASCE)0733-9445(2003)129:1(12)
Girhammar UA, Gopu V (1993) Composite beam-columns with interlayer slip-exact analysis. Journal of Structural Engineering 119(4):1265–1282, DOI: https://doi.org/10.1061/(ASCE)0733-9445(1993)119:4(1265)
Henriques D, GoncAlves R, Camotim D (2015) A physically non-linear GBT-based finite element for steel and steel-concrete beams including shear lag effects. Thin-Walled Structures 90:202–215, DOI: https://doi.org/10.1016/j.tws.2015.01.010
Hou HT, Liu X, Qu B, Ma TX, Liu HN, Feng MY, Zhang B (2016) Experimental evaluation of flexural behavior of composite beams with cast-in-place concrete slabs on precast prestressed concrete decks. Engineering Structures 126(1):405–416, DOI: https://doi.org/10.1016/j.engstruct.2016.07.065
Luo YB, Yan JB (2022) Developments of prefabricated steel-concrete composite beams with novel steel-yielding demountable bolt connectors. Journal of Constructional Steel Research 190:107123, DOI: https://doi.org/10.1016/j.jcsr.2021.107123
Marvi B (2010) Push-off tests on full-depth precast concrete bridge deck panel to steel girder connection. MSc Thesis, Ryerson University, Toronto, Canada
Mohiuddin AK (2014) Accelerated bridge construction. Butterworth-Heinemann
Newmark NM, Siess CP, Viest IM (1951) Tests and analysis of composite beams with incomplete interaction. Proceedings of Society for Experimental Stress Analysis 9(1):75–92
Nie JG, Shen JM, Yu ZW (1995) A reduced rigidity method for calculating deformation of composite steel-concrete beams. China Civil Engineering Journal 28(6):11–17, DOI: https://doi.org/10.15951/j.tmgcxb.1995.06.002 (in Chinese)
Oehlers DJ, Coughlan CG (1986) The shear stiffness of stud shear connections in composite beams. Journal of Constructional Steel Research 6(4):273–284, DOI: https://doi.org/10.1016/0143-974X(86)90008-8
Ollgaard JG, Slutter RG (1971) Fisher JW, shear strength of stud connectors in lightweight and normal-weight concrete. Aisc Eng Journal 8(2):55–59
Sheehan T, Dai X, Lam D (2018) Flexural behaviour of asymmetric composite beam with low degree of shear connection. Journal of Constructional Steel Research 141:251–261, DOI: https://doi.org/10.1016/j.jcsr.2017.11.018
Shim CS, Chang SP (2003) Cracking of continuous composite beams with precast decks. Journal of Constructional Steel Research 59(2): 201–214, DOI: https://doi.org/10.1016/S0143-974X(02)00032-9
Shim CS, Chung CH, Kim IK, Kim YJ (2010) Development and application of precast decks for composite bridges. Structural Engineering International 20(2):126–133, DOI: https://doi.org/10.2749/101686610791283623
Shim CS, Lee PG, Chang S P (2001) Design of shear connection in composite steel and concrete bridges with precast decks. Journal of Constructional Steel Research 57(3):203–219, DOI: https://doi.org/10.1016/S0143-974X(00)00018-3
Tawadrous R, Morcous G (2019) Design of shear pocket connection in full-depth precast concrete deck systems. Engineering Structures 179:367–386, DOI: https://doi.org/10.1016/j.engstruct.2018.11.003
Wu CL, Liu JM, Wang QH, Mou B, Pan W (2020) Mechanical properties of modular prefabricated steel-concrete composite internal joints under cyclic loading. Journal of Constructional Steel Research 178(5), DOI: https://doi.org/10.1016/J.JCSR.2020.106463
Xu RQ, Wu YF (2007) Two-dimensional analytical solutions of simply supported composite beams with interlayer slips. International Journal of Solids and Structures 44(1):165–175, DOI: https://doi.org/10.1016/j.ijsolstr.2006.04.027
Yang T, Liu SY, Qin BX, Liu YQ (2020) Experimental study on multi-bolt shear connectors of prefabricated steel-concrete composite beams. Journal of Constructional Steel Research 173:106260.1–106260.13, DOI: https://doi.org/10.1016/j.jcsr.2020.106260
Zhang YJ, Chen BC, Liu AR, Pi YL, Zhang JP, Wang Y, Zhong LC (2019) Experimental study on shear behavior of high strength bolt connection in prefabricated steel-concrete composite beam. Composites Part B: Engineering 159 (Feb.15):481–489, DOI: https://doi.org/10.1016/j.compositesb.2018.10.007
Zhao HL, Yuan Y, Ye ZM (2012) Simplified nonlinear simulation of steel-concrete composite beams. Journal of Constructional Steel Research 71:83–91, DOI: https://doi.org/10.1016/j.jcsr.2011.08.015