Measuring agility as a performance outcome

Journal of Manufacturing Technology Management - Tập 22 Số 3 - Trang 384-404 - 2011
Charlene A.Yauch1
1Milwaukee School of Engineering, Milwaukee, Wisconsin, USA

Tóm tắt

PurposeThe purpose of this research was to construct a quantitative, objective metric for agility performance that assesses agility as a performance outcome, capturing both organizational success and environmental turbulence, and applicable to manufacturing organizations of all types.Design/methodology/approachThe agility performance metric was developed by creating a theoretical model and then operationalizing the model through literature review, case studies, and pilot survey data. It was subsequently refined, based on input from an expert panel and survey responses.FindingsThe agility performance metric is demonstrated using data from four manufacturing plants, which represent the four possible combinations of success and turbulence.Research limitations/implicationsThe agility metric developed is consistent with the theoretical model, as well as empirical evidence from the demonstration companies. Further validation of the metric is necessary to fully establish this approach as a valid and reliable assessment tool.Practical implicationsThis approach could be used by manufacturing managers to get a “snapshot” of an organization's agility performance level and to systematically consider the influence of environmental entities.Originality/valueConsideration of agility as a performance outcome, rather than a structural or operational characteristic is a novel approach. The resulting quantitative performance index, which closely matches the theoretical definition of agility, is applicable to any type of manufacturing organization, can be used to make direct comparisons between manufacturers in different industries, and will automatically be updated over time as success is relative to industry medians.

Từ khóa


Tài liệu tham khảo

Agarwal, A., Shankar, R. and Tiwari, M.K. (2007), “Modeling agility of supply chain”, Industrial Marketing Management, Vol. 36 No. 4, pp. 443‐57.

Barimchai, M., Zimmers, E.W. Jr and Marangos, C.A. (2006), “A comprehensive framework for evaluating suppliers' agile performance”, International Journal of Agile Manufacturing, Vol. 9 No. 2, pp. 37‐51.

Caswell, N.S. and Nigam, A. (2005), “Agility = change + coordination”, Proceedings of the 2005 Seventh IEEE International Conference on E‐Commerce Technology Workshops, Munich, Germany.

Christian, I., Ismail, H., Mooney, J., Snowden, S., Toward, M. and Zhang, D. (2001), “Agile manufacturing transitional strategies”, Proceedings of the Fourth SMESME International Conference, Aalborg, Denmark, pp. 69‐77.

Demeter, K. and Kolos, K. (2009), “Marketing, manufacturing and logistics: an empirical examination of their joint effect on company performance”, International Journal of Manufacturing Technology and Management, Vol. 16 No. 3, pp. 215‐33.

Dove, R. (1995), “Measuring agility: the toll of turmoil”, Production Magazine, Vol. 107 No. 1, pp. 12‐14.

Dove, R. (2001), Response Ability: The Language, Structure, and Culture of the Agile Enterprise, Wiley, New York, NY.

Drickhamer, D. (2004), “Tick tock: IW/MPI census of manufacturers shows challenges, reality and, yes, even optimism”, Industry Week, January, available at: www.industryweek.com/ReadArticle.aspx?ArticleID=1365 (accessed 18 August 2008).

Duncan, R.B. (1972), “Characteristics of organizational environments and perceived environmental uncertainty”, Administrative Science Quarterly, Vol. 17, pp. 313‐27.

Dwyer, F.R. and Welsh, M.A. (1985), “Environmental relationships of the internal political economy of marketing channels”, Journal of Marketing Research, Vol. 22 No. 4, pp. 397‐414.

Emery, F.E. and Trist, E.L. (1965), “The causal texture of organizational environments”, Human Relations, Vol. 18, pp. 21‐32.

Giachetti, R.E., Martinez, L.D., Saenz, O.A. and Chen, C.S. (2003), “Analysis of the structural measures of flexibility and agility using a measurement theoretical framework”, International Journal of Production Economics, Vol. 86 No. 1, pp. 47‐62.

Goldman, S.L., Nagel, R.N. and Preiss, K (1995), Agile Competitors and Virtual Organizations – Strategies for Enriching the Customer, Van Nostrand Reinhold, London.

HP (2005), “Measuring and benchmarking the agility of your business”, White Paper, available at: http://h71028.www7.hp.com/ERC/downloads/4AA0‐1790ENW.pdf (accessed 15 August 2008).

Ismail, H.S., Snowden, S.P., Poolton, J., Reid, I.R. and Arokiam, I.C. (2006), “Agile manufacturing framework and practice”, International Journal of Agile Systems and Management, Vol. 1 No. 1, pp. 11‐28.

Ismail, H.S., Snowden, S.P., Vasilakis, G., Christian, I. and Toward, M. (2002), “A strategic framework for agility implementation”, Proceedings of the International Manufacturing Leaders Forum, Adelaide, Australia.

Jaworski, B.J. and Kohli, A.K. (1993), “Market orientation: antecedents and consequences”, Journal of Marketing, Vol. 57 No. 3, pp. 53‐70.

Kara, S. and Kayis, B. (2004), “Manufacturing flexibility and variability: an overview”, Journal of Manufacturing and Technology Management, Vol. 15 No. 6, pp. 466‐78.

Klassen, R.D. and Whybark, D.C. (1999), “The impact of environmental technologies on manufacturing performance”, Academy of Management Journal, Vol. 42 No. 6, pp. 599‐615.

Kuivalainen, O., Sundqvist, S., Puumalainen, K. and Cadogan, K.W. (2004), “The effect of environmental turbulence and leader characteristics on international performance: are knowledge‐based firms different?”, Canadian Journal of Administrative Sciences, Vol. 21 No. 1, pp. 35‐50.

Kurian, T.J. (2006), “Agility metrics: a quantitative fuzzy based approach for measuring agility of a software process”, Proceedings of the International Conference on Agile Manufacturing, Norfolk, VA.

Lawrence, P.R. and Lorsch, J.W. (1967), Organization and Environment: Managing Differentiation and Integration, Harvard Business School Press, Boston, MA.

Lichtenthaler, U. (2009), “Absorptive capacity, environmental turbulence, and the complementarity of organizational learning processes”, Academy of Management Journal, Vol. 52 No. 4, pp. 822‐46.

Lomas, C.D.W., Wilkinson, J., Maropoulos, P.G. and Matthews, P.C. (2006), “Measuring design process agility for the single company product development process”, International Journal of Agile Manufacturing, Vol. 9 No. 2, pp. 105‐12.

MacDuffie, J.P. (1995), “Human resource bundles and manufacturing performance: organizational logic and flexible production systems in the world auto industry”, Industrial & Labor Relations Review, Vol. 48 No. 2, pp. 197‐221.

Maltz, A.C., Shenhar, A.J. and Reilly, R.R. (2003), “Beyond the balanced scorecard: refining the search for organizational success measures”, Long Range Planning, Vol. 36, pp. 187‐204.

Miles, R.E. and Snow, C.C. (1978), Organizational Strategy, Structure and Process, McGraw‐Hill, New York, NY.

Milliken, F.J. (1987), “Three types of perceived uncertainty about the environment: state, effect, and response uncertainty”, Academy of Management Review, Vol. 12 No. 1, pp. 133‐43.

Nagel, R.N. and Dove, R. (1992), 21st Century Manufacturing Enterprise Strategy, Iacocca Institute, Lehigh University, Bethlehem, PA.

Ramesh, G. and Devadasan, S.R. (2007), “Literature review on the agile manufacturing criteria”, Journal of Manufacturing Technology Management, Vol. 18 No. 2, pp. 182‐201.

Schroeder, R.G., Bates, K.A. and Junttila, M.A. (2002), “A resource‐based view of manufacturing strategy and the relationship to manufacturing performance”, Strategic Management Journal, Vol. 23 No. 2, pp. 105‐17.

Sharifi, H. and Zhang, Z. (1999), “A methodology for achieving agility in manufacturing organizations”, International Journal of Production Economics, Vol. 62 Nos 1‐2, pp. 7‐22.

Sharifi, H. and Zhang, Z. (2001), “Agile manufacturing in practice: application of a methodology”, International Journal of Operations & Production Management, Vol. 21 Nos 5/6, pp. 772‐94.

Sharifi, H., Ismail, H.S. and Reid, I. (2006), “Achieving agility in supply chain through simultaneous ‘design of’ and ‘design for’ supply chain”, Journal of Manufacturing Technology Management, Vol. 17 No. 8, pp. 1078‐98.

Sieger, D.B., Badiru, A. and Milatovic, M. (2000), “A metric for agility measurement in product development”, IIE Transactions, Vol. 32, pp. 637‐45.

Skinner, W. (1969), “Manufacturing – missing link in corporate strategy”, Harvard Business Review, Vol. 47 No. 3, pp. 136‐45.

Swafford, P.M., Ghosh, S. and Murthy, N.N. (2006), “A framework for assessing value chain agility”, International Journal of Operations & Production Management, Vol. 26 No. 2, pp. 118‐40.

Toward, M., Ismail, I., Christian, C. and Snowden, S. (2003), “Measures of agility: product‐process responsiveness”, in Tatsiopoulos, I. and Leopoulos, V. (Eds), Proceedings of the 6th SMESME International Conference, Athens, pp. 323‐33.

Tsourveloudis, N.C. (2005), “Knowledge‐based measurement of enterprise agility”, in Leondes, C.T (Ed.), Intelligent Knowledge‐Based Systems: Business and Technology of the New Millennium, Vol. 1, Kluwer Academic press, Norwell, MA, chapter 3, pp. 67‐82.

Tsourveloudis, N.C. and Valavanis, K.P. (2002), “On the measurement of enterprise agility”, Journal of Intelligent and Robotic Systems, Vol. 33, pp. 329‐42.

van Hoek, R.I., Harrison, A. and Christopher, M. (2001), “Measuring agile capabilities in the supply chain”, International Journal of Operations & Production Management, Vol. 21 No. 1, pp. 126‐48.

Volberda, H.W. and van Bruggen, G.H. (1997), “Environmental turbulence: a look into its dimensionality”, in Bemelmans, M.T.A. (Ed.), Dynamiek in organisatie en bedrijfsvoering, NOBO, Enschede, pp. 137‐46.

Yauch, C.A. (2005), “Measuring agility: combining organizational success and environmental turbulence”, International Journal of Agile Manufacturing, Vol. 8 No. 2, pp. 29‐37.

Yauch, C.A. and Navaresse, D.O. (2006), “Assessing agility at 70 manufacturing plants”, International Journal of Agile Manufacturing, Vol. 9 No. 2, pp. 19‐28.

Yusuf, Y.Y., Gunasekaran, A, Adeleye, E.O. and Sivayoganathan, K. (2004), “Agile supply chain capabilities: determinants of competitive objectives”, European Journal of Operational Research, Vol. 159 No. 2, pp. 379‐92.

Zhang, Z. and Sharifi, H. (2000), “A methodology for achieving agility in manufacturing organizations”, International Journal of Operations & Production Management, Vol. 20 No. 4, pp. 496‐513.

Zhang, Z. and Sharifi, H. (2007), “Towards theory building in agile manufacturing strategy – a taxonomical approach”, IEEE Transactions on Engineering Management, Vol. 54 No. 2, pp. 351‐70.

Zsifkovits, H.E. and Engelhardt‐Nowitzki, C. (2007) An analysis of frameworks for measuring supply chain agility, in Matthews, P. (Ed.), Proceedings of The IET International Conference on Agile Manufacturing, Durham, England, pp. 87‐95.

Thông tin
Thông tin xuất bản

Journal of Manufacturing Technology Management

Tập 22 Số 3

384-404

Thông tin tác giả