Measurement of the temperature-dependent output of lead zirconate titanate transducers

Legon, 2018, Neuromodulation with single-element transcranial focused ultrasound in human thalamus, Hum. Brain Mapp., 39, 1995, 10.1002/hbm.23981 Martin, 2019, Investigation of the repeatability and reproducibility of hydrophone measurements of medical ultrasound fields, J. Acoust. Soc. Am., 145, 1270, 10.1121/1.5093306 Sapozhnikov, 2015, Acoustic holography as a metrological tool for characterizing medical ultrasound sources and fields, J. Acoust. Soc. Am., 138, 1515, 10.1121/1.4928396 2013 2013 Preston, 1999, Primary calibration of membrane hydrophones in the frequency range 0.5 MHz to 60 MHz, Metrologia, 36, 331, 10.1088/0026-1394/36/4/13 2013 Sun, 2014 Cobbold, 2006 Gallego-Juarez, 1989, Piezoelectric ceramics and ultrasonic transducers, J. Phys. Sci. Instrum., 22, 804, 10.1088/0022-3735/22/10/001 Wang, 1998, Influence of temperature on the electromechanical and fatigue behavior of piezoelectric ceramics, J. Appl. Phys., 83, 5342, 10.1063/1.367362 Zhang, 1994, Direct evaluation of domain-wall and intrinsic contributions to the dielectric and piezoelectric response and their temperature dependence on lead zirconate-titanate ceramics, J. Appl. Phys., 75, 454, 10.1063/1.355874 Wolf, 2004, Temperature dependence of the piezoelectric response in lead zirconate titanate films, J. Appl. Phys., 95, 1397, 10.1063/1.1636530 Horchidan, 2016, A comparative study of hard/soft PZT-based ceramic composites, Ceram. Int., 42, 9125, 10.1016/j.ceramint.2016.02.179 Zhuang, 1989, Composition and temperature dependence of the dielectric, piezoelectric and elastic properties of pure PZT ceramics, IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 36, 413, 10.1109/58.31777 Miclea, 2007, Effect of temperature on the main piezoelectric parameters of a soft PZT ceramic, Rom. J. Inf. Sci. Technol., 10, 243 Georges Sabat, 2007, Temperature dependence of the complete material coefficients matrix of soft and hard doped piezoelectric lead zirconate titanate ceramics, J. Appl. Phys., 101 S. Sherrit, G. Yang, H.D. Wiederick, B.K. Mukherjee, Temperature dependence of the dielectric, elastic and piezoelectric material constants of lead zirconate titanate ceramics, in: Proceedings of the International Conference on Smart Materials, Structures and Systems, 1999, pp. 7–10. Xu, 2001, Domain wall motion and its contribution to the dielectric and piezoelectric properties of lead zirconate titanate films, J. Appl. Phys., 89, 1336, 10.1063/1.1325005 2013 Beissner, 1993, Radiation force and force balances, Ultrason. Expo., 163 Beissner, 1984, Minimum target size in radiation force measurements, J. Acoust. Soc. Am., 76, 1505, 10.1121/1.391433 Preston, 2012 Torr, 1984, The acoustic radiation force, Amer. J. Phys., 52, 402, 10.1119/1.13625 Jones, 1992, ITS–90 density of water formulation for volumetric standards calibration, J. Res. Natl. Inst. Stand. Technol., 97, 335, 10.6028/jres.097.013 Marczak, 1997, Water as a standard in the measurements of speed of sound in liquids, J. Acoust. Soc. Am., 102, 2776, 10.1121/1.420332 Zeqiri, 2020, A radiation force balance target material for applications below 0.5 MHz, Ultrasound Med. Biol., 46, 2520, 10.1016/j.ultrasmedbio.2020.04.031 Sutton, 2003, Measurement of ultrasonic power using an acoustically absorbing well, Ultrasound Med. Biol., 29, 1507, 10.1016/S0301-5629(03)01036-6 Shaw, 2008, Calibration and measurement issues for therapeutic ultrasound, Ultrasonics, 48, 234, 10.1016/j.ultras.2007.10.010 Haller, 2012, Metrology of high-intensity therapeutic ultrasound within the EMRP project ‘External Beam Cancer Therapy’. Characterization of sources, Metrologia, 49, S267, 10.1088/0026-1394/49/5/S267 Koch, 2014, Final report on key comparison CCAUV. U-K3 for ultrasonic power, Metrologia, 51, 09001, 10.1088/0026-1394/51/1A/09001 Saptari, 2004 Weber, 2017, Using a heterodyne vibrometer in combination with pulse excitation for primary calibration of ultrasonic hydrophones in amplitude and phase, Metrologia, 54, 432, 10.1088/1681-7575/aa72ba Koch, 1999, Primary calibration of hydrophones with extended frequency range 1 to 70 MHz using optical interferometry, IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 46, 1303, 10.1109/58.796135 Koch, 1998, Calibration of a fiber tip ultrasonic sensor up to 50 MHz and the application to shock wave measurement, Ultrasonics, 36, 721, 10.1016/S0041-624X(97)00121-2 Treeby, 2010, K-Wave: MATLAB toolbox for the simulation and reconstruction of photoacoustic wave fields, J. Biomed. Opt., 15, 10.1117/1.3360308 2017 Karaböce, 2011, Instantaneous input electrical power measurements of HITU transducer, J. Phys. Conf. Ser., 279 2012 2008 Baêsso, 2019, Ultrasonic parameter measurement as a means of assessing the quality of biodiesel production, Fuel, 241, 155, 10.1016/j.fuel.2018.12.032 Johnson, 2002 1958 Smith, 1990, A multiple-frequency hydrophone calibration technique, J. Acoust. Soc. Am., 87, 2231, 10.1121/1.399191 Calibration and Measurement Capabilities in the context of the CIPM MRA, https://www.bipm.org/kcdb/cmc/quick-search, Accessed: 2020-12-01. Radiation Force Balance,https://www.acoustics.co.uk/product/radiation-force-balance/, Accessed: 2020-12-01. Maruvada, 2007, Acoustic power calibration of high-intensity focused ultrasound transducers using a radiation force technique, J. Acoust. Soc. Am., 121, 1434, 10.1121/1.2431332 Shaw, 2008, A buoyancy method for the measurement of total ultrasound power generated by HIFU transducers, Ultrasound Med. Biol., 34, 1327, 10.1016/j.ultrasmedbio.2008.01.008